Added new gr_config member to hold TPC physical id map.
Updated ecc stats structures to hold physical gpc,tpc
numbers. Previously logical id's were exposed via ecc
sysfs nodes.
Consumers of ecc sysfs nodes refer tpc_fs_mask which is
physical gpc/tpc layout whereas ecc sysfs nodes were updated
with logical gpc/tpc layout. This change ensures that both
use the same framework.
JIRA NVGPU-9607
Bug 3950378
Change-Id: I1f91956dd027ffdc12042dd33dc491a3ce1e1ff6
Signed-off-by: Kishan <kpalankar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2866264
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Added new gr_config member to hold TPC physical id map.
Updated ecc stats structures to hold physical gpc,tpc
numbers. Previously logical id's were exposed via ecc
sysfs nodes.
Consumers of ecc sysfs nodes refer tpc_fs_mask which is
physical gpc/tpc layout whereas ecc sysfs nodes were updated
with logical gpc/tpc layout. This change ensures that both
use the same framework.
JIRA NVGPU-9607
Bug 3950378
Change-Id: Iac99951fc3aa9dde02e833109f32aa5bb37ea15f
Signed-off-by: Kishan <kpalankar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2855032
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Volta+ chips supports PES floorsweeping and Ampere+(iGPU) chips supports
ROP floorsweeping. At present, the driver isn't aware of PES, ROP
floorsweeping, make the driver PES, ROP floorsweeping aware by introducing the
following fields in nvgpu_gr_config:
- gpc_(rop/pes)_mask: Contains the bit mask of non FSed ROP/PES units per GPC.
- gpc_(rop/pes)_logical_id_map: Translates per GPC ROP/PES physical id to
logical id.
Introduce the following HAL functions to read PES/ROP FS data:
- gops_fuse.fuse_status_opt_(pes/rop)_gpc: This fuction gets the FS
config from the fuse.
- gops_top.get_max_(pes/rop)_per_gpc: Gets the maximum number of PES/ROP
units that can be present in a GPC.
In addition, introduce the enabled flag NVGPU_SUPPORT_PES_FS to identify chips
which support PES floorsweeping, piggyback on NVGPU_SUPPORT_ROP_IN_GPC
enabled flag to identify ROP floorsweeping.
Bug 3524791
Change-Id: I065bab6c02618fe38892c8c890b069c340b85301
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2679570
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are added
1) nvgpu_gr_config->gpc_tpc_mask_physical is now indexed by physical
gpc id instead of logical id.
2) Removed the conversion of logical fbp ids and replace them with
physical ids.
3) nvgpu_gpu_instance->fbp_en_mask now contains the mask of physical fbp ids.
4) gk20a_ctrl_ioctl_gpu_characteristics returns gpu.gpc_mask returns mask
of physical ids.
Bug 200712091
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0e066df76e07203ff4a5be5bfff2cef8566b425d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2648831
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
At present, there is an inconsistency in the order in which
gpc_tpc masks are reported to the userspace. Both gpc and
tpc masks are reported using physical-ids. However, the
gpc_tpc_masks array is ordered by logical gpc-ids and
not physical-ids. This creates a mismatch between the gpc
reported as enabled in the gpc_mask and its corresponding
gpc_tpc_mask.
Introduce field "gpc_tpc_mask_physical" which stores the
gpc_tpc_masks in physical order and update
NVGPU_GPU_IOCTL_GET_TPC_MASKS to return this field.
Bug 200665942
Change-Id: I63aa83414a59676b7e7d36b6deb527e2f3c04cff
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2531114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add below updates to common.gr doxygen:
- Add doxygen comments for APIs that are mentioned in RM SWAD and in
RM-common.gr traceability document.
- Comment about valid ranges for input parameters of bunch of functions.
- Add nvgpu_assert() to ensure correct value is passed as input
parameter to number of functions.
- Add references to relevant functions with @see.
- Update Targets field for unit tests to cover newly doxygenated
functions.
- Update unit test test_gr_init_hal_pd_skip_table_gpc to take care of
new asserts added into some APIs.
Jira NVGPU-6180
Change-Id: Ie889bed96b6428b1fd86dcf30b322944464e9d12
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2469397
(cherry picked from commit 5d7d7e9ce1c4efe836ab842d7962a3aee4e8972f)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2469394
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fuse registers should be queried with physical gpc-id and not the
logical ones. For tu104 and before chips physical gpc-ids are same as
logical for non-floorswept config but for newer chips it may differ.
Also, logical to physical mapping is not present for a floorswept gpc so
query gpc_tpc mask only upto actual gpcs that are present.
Jira NVGPU-6080
Change-Id: I84c4a3c1f256fdd1927f4365af26e9892fe91beb
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2417721
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros to get current GR instance id and the pointer
nvgpu_gr_get_cur_instance_ptr()
nvgpu_gr_get_cur_instance_id()
This approach makes sure that the caller is getting GR instance pointer
under mutex g->mig.gr_syspipe_lock in MIG mode. Trying to access
current GR instance outside of this lock in MIG mode dumps a warning.
Return 0th instance in case MIG mode is disabled.
Use these macros in nvgpu instead of direct reference to
g->mig.cur_gr_instance.
Store instance id in struct nvgpu_gr. This is to retrieve GR instance
id in functions where struct nvgpu_gr pointer is already available.
Jira NVGPU-5648
Change-Id: Ibfef6a22371bfdccfdc2a7d636b0a3e8d0eff6d9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2413140
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate flag gpu_dbg_gr to enable common.gr specific debugging.
Add this flag to all the existing debug logs that use gpu_dbg_fn or
gpu_dbg_info for debugging. Also add many other debugging logs that
might be helpful in debugging.
Removing debug log in gv11b_gr_init_get_nonpes_aware_tpc() as it dumps
too much data that does not seem useful.
Batch all interrupt enable functions in gr_init_setup_hw() together for
readability.
Jira NVGPU-5648
Change-Id: I0b857650122cdb1f974b452d28c26e7f142baf61
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2411740
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Get number of SMs from GR instance specific nvgpu_gr_config pointer
instead of global SM count in below functions :
nvgpu_gr_fs_state_init()
gv11b_gr_init_sm_id_config()
Update nvgpu_gr_config_get_gpc_skip_mask() to return 0 in case gpc_index
is greater than available gpc_count. This is not MIG specific, but based
on code review possible even today for existing chips.
See gm20b_gr_init_pd_skip_table_gpc()
Update nvgpu_gr_get_override_ecc_val() to return GR instance specific
value.
Execute gr_init_setup_hw() for each GR instance.
Disable below failing unit tests:
nvgpu_gr_fs_state.test_gr_fs_state_error_injection
nvgpu_gr_init.test_gr_init_hal_config_error_injection
Jira NVGPU-5648
Change-Id: Ie8f1c0c304c634756786d85facf336a5c9ae8195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410702
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Expose below two new APIs from common.grmgr unit
nvgpu_grmgr_get_gr_num_gpcs() - get per instance number of GPCs
nvgpu_grmgr_get_gr_gpc_phys_id() - get physical GPC id for MIG engine
local id in corresponding instance
Execute gr_init_config() for each GR instance.
Add gr_config_init_mig_gpcs() to initialize GPC data in case MIG is
enabled. Separate out gr_config_init_gpcs() for legacy GPC data
initialization.
These functions will inititialize below data in struct nvgpu_gr_config:
max_gpc_count
gpc_count
gpc_mask
gpc_tpc_mask[gpc_count]
max_tpc_per_gpc_count
Rest of the values in struct nvgpu_gr_config are either based on above
values, or read from HW after setting GPC PRI window.
In gr_config_alloc_struct_mem(), rename total_gpc_cnt to total_tpc_cnt
since it represents total TPC count and not GPC. Remove use of temp3
variable since it does not give any idea on usage.
Jira NVGPU-5648
Change-Id: I646cac2ddc312e72b241b1b2a0e51a5cce141535
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2406390
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute on
different hardware resources. This feature proposes modifications
in the software to modify the virtual SM id to TPC mapping across
the mission and redundant contexts. The virtual SM identifier to TPC
mapping is done by nvgpu when setting up the patch context.
The recommendation for the redundant setting is to offset the
assignment by one TPC, and not by one GPC. This will ensure that both
GPC and TPC diversity. The SM and Quadrant diversity will happen
naturally. For kernels with few CTAs, the diversity is guaranteed
to be 100%. In case of completely random CTA allocation,
e.g. large number of CTAs in the waiting queue, the diversity is
1 - 1/#SM, or 87.5% for GV11B, 97.9% for TU104.
Added NvGpu CFLAGS to enable/disable the SM diversity support
"CONFIG_NVGPU_SM_DIVERSITY".
This support is only enabled on gv11b and tu104 QNX non safety build.
JIRA NVGPU-4685
Change-Id: I8e3eaa72d8cf7aff97f61e4c2abd10b2afe0fe8b
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
get_gpc_mask hal is set only for tu104. Add CONFIG_NVGPU_DGPU check
in the code for using that hal.
gr_config_alloc_struct_mem function is called from nvgpu_gr_config_init
gr_config_free_mem is called gr_config_alloc_struct_mem on failure.
No need to call gr_config_free_mem from nvgpu_gr_config_init again
for failure.
nvgpu_gr_config_init allocate nvgpu_gr_config struct.
config->sm_to_cluster will never get allocated before.So no need to
check for config->sm_to_cluster and do a memset.
Jira NVGPU-4531
Change-Id: I928041c110019bec885f9d5b6978db3032bc493c
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2262229
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below 5.7 violations are reported in common.gr.config unit :
nvgpu/drivers/gpu/nvgpu/common/gr/gr_config.c:628:
identifier_reuse: Identifier "sm_info" is already used to represent a type.
Fix them by renaming struct sm_info to struct nvgpu_sm_info
Jira NVGPU-3225
Change-Id: I26f70a4ed2a5a845e0dc9daeb8fb5474e35d42fb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110986
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
