Changes:
- update nvgpu_nvs_ctrl_queue to have queue direction as it is required
by gsp scheduler to erase queue individually
- queue direction is updated during ioctl call to create queue and is
used only by gsp scheduler. So no other moduler should be affected by
it.
- need to pass the size of struct which is u32 so downgrading it from
u64 to u32 is intentional, misra C violation 10.3 can be ignored here
Bug 4027512
Change-Id: I6ef6e4b06124e25da3d004a2d8822516c3ac2105
Signed-off-by: vivekku <vivekku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2881804
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Currently KMD_SCHEDULING_WORKER_THREAD can be enabled/disabled using
compile time flag but this flag does give ability to control the
feature based on the chip.
GSP is enabled only on ga10b where KMD_SCHEDULING_WORKER_THREAD should
be disabled while should be enabled for other chips at the same time
to support GVS tests.
Change adds enabled flag to control KMD_SCHEDULING_WORKER_THREAD based
on the chip.
Bug 3935433
Change-Id: I9d2f34cf172d22472bdc4614073d1fb88ea204d7
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2867023
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- As part of mmap call handler mmap_sem is being acquired which is
causing an BUG: scheduling while atomic:. This is happening because
mmap callback gets called with mmap_sem held. The mmap file handler
is called via call_mmap() via mmap_region() via do_mmap(), and the
caller of do_mmap() must hold down_write(¤t->mm->mmap_sem).
To fix this issue removing the mmap_sem locking from nvs mmap handler.
- If remap_vmalloc_range() is used to map the pages to userspace then
allocated pages should be mapped into virtually contiguous space by
passing VM_USERMAP flag to vmap(). Passing VM_USERMAP to vmap() call
if API nvgpu_dma_alloc_flags_sys() is called with flag
NVGPU_DMA_VM_USERMAP_ADDRESS.
Bug 3884011
Change-Id: I64264f6f6e0dd75b1f828dc58355d740e6ef5ccb
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2820781
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use CONFIG_KMD_SCHEDULING_WORKER_THREAD instead of
CONFIG_NVS_KMD_BACKEND to remove confusion about the CPU based
KMD scheduling worker thread.
The KMD based scheduling worker thread caters to both Manual Mode
CPU based scheduler as well as Automatic Round Robin CPU based
scheduler.
For the traditional submit path, add correct handling of the
CONFIG_NVS_PRESENT. CPU based worker thread should be part of
CONFIG_NVS_PRESENT. Eventually, when DCONFIG_KMD_SCHEDULING_WORKER_THREAD
is removed, the application must switch to GSP.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0886ef3b2e0124b6fe22c2bf0bf7d1fa98039d00
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2810217
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added infrastructure for enabling parsing Control-Fifo's
ring buffers(i.e. send/receive).
Initialization of these buffers are handled as part of
nvgpu_nvs_buffer_alloc() call itself.
A follow-up change shall implement the methods defined here
as part of the existing NVS worker thread.
The changes adhered to the design laid out in the header
nvsched/include/nvs/nvs-control-interface.h.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I2050e6fb681eba80e01cf547ada37a955e58315a
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2764518
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Change enables CONFIG_NVS_PRESENT for safety build.
- Fixes misra vioations.
- Renames sched.h to nvs_sched.h to avoid the conflict with QNX system
sched.h file for the safety support.
- Disable test_channel_close, test_tsg_unbind_channel,
test_channel_enable_disable_tsg, test_gv11b_fifo_preempt_tsg,
test_tsg_unbind_channel_check_hw_state and test_rc_deinit unit tests.
Jira NVGPU-8619
Change-Id: I7c983de2f4910fcb23687ec23368a060ce89c918
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2763579
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support for accessing Event Queue for non-exclusive
users. Allows, non-exclusive users to open Event Queues
before exclusive users. Non-Exclusive users can only
use the Event Queue in a read-only mode.
Add VM_SHARED for Event Queues across all users instead of just
Read-Only users. Event queues are shared with multiple processes
and as such require VM_SHARED across all users(exclusive and
observers).
Jira NVGPU-8608
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: Id9733c2511ded6f06dd9feea880005bdc92e51a0
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2745083
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Added implementation for following IOCTLs
NVGPU_NVS_CTRL_FIFO_CREATE_QUEUE
NVGPU_NVS_CTRL_FIFO_RELEASE_QUEUE
The above ioctls are supported only for users with
R/W permissions.
1) NVGPU_NVS_CTRL_FIFO_CREATE_QUEUE constructs a memory region
via the nvgpu_dma_alloc_sys() API and creates the corresponding
GPU and kernel mappings. Upon successful creation, KMD exports
this buffer to the userspace via a dmabuf fd that the UMD
can use to mmap it into its process address space.
2) Added plumbing to store VMA's corresponding to different users
for event queue in future.
3) Added necessary validation checks for the IOCTLs
4) NVGPU_NVS_CTRL_FIFO_RELEASE_QUEUE is used to clear the queues.
5) Using a global queue lock to protect access to the queues. This
could be modified to be more fine-grained in future when there
is more clarity on GSP's implementation and access of queues.
6) Added plumbing to enable user subscription to queues.
NVGPU_NVS_CTRL_FIFO_RELEASE_QUEUE is used to unsubscribe
the user from the queue. Once, the last user is deleted,
all the queues will be cleared. User must ensure that
any mappings are removed before calling release queue.
7) Set the default queue_size for event queues to
PAGE_SIZE. This can be modified later. For event
queues, UMD shall fetch the queue_size.
Jira NVGPU-8129
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I31633174e960ec6feb77caede9d143b3b3c145d7
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2723198
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a device node for management of nvs control fifo buffers for
scheduling domains. The current design consists of a master structure
struct nvgpu_nvs_domain_sched_ctrl for management of users as well
as control queues. Initially all users are added as non-exclusive users.
Subsequent changes will add support for IOCTLS to manage opening of
Send/Receive and Event buffers, querying characteristics etc.
In subsequent changes, a user that tries to open a Send/Receive queue
will first try to reserve itself as an exclusive user and only if that
succeeds can proceed with creation of both Send/Receive queues.
Exclusive users will be reset to non-exclusive users just before they
close their device node handle.
Jira NVGPU-8128
Change-Id: I15a83f70cd49c685510a9fd5ea4476ebb3544378
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2691404
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
