The support sparse HAL severs only one purpose: return true or false
depending on whether the given chip supports sparse mappings. This
HAL is used to, in turn, program (or not) the
NVGPU_SUPPORT_SPARSE_ALLOCS enabled flag. So instead of having all
this rigmarole to program this flag just program it for all native
GPUs. Then, in the vGPU specific characteristics function disable it
explicitly. This seems to have precedent already.
JIRA NVGPU-1737
JIRA NVGPU-1934
Change-Id: I630928ad656aaffc09fdc6b7fec9fc423aa94c38
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2006796
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename __nvgpu_set_enabled() to nvgpu_set_enabled(). The original
double underscore was present to indicate that this function is a
function with potentially unintended side effects (enabling a feature
has wide ranging impact).
To not lose this documentation a comment was added to convey that this
function must be used with care.
JIRA NVGPU-1029
Change-Id: I8bfc6fa4c17743f9f8056cb6a7a0f66229ca2583
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989434
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gk20a_channel_from_id() to retrieve a channel, given a raw channel
ID, with a reference taken (or NULL if the channel was dead). This makes
it harder to mistakenly use a channel that's dead and thus uncovers bugs
sooner. Convert code to use the new lookup when applicable; work remains
to convert complex uses where a ref should have been taken but hasn't.
The channel ID is also validated against FIFO_INVAL_CHANNEL_ID; NULL is
returned for such IDs. This is often useful and does not hurt when
unnecessary.
However, this does not prevent the case where a channel would be closed
and reopened again when someone would hold a stale channel number. In
all such conditions the caller should hold a reference already.
The only conditions where a channel can be safely looked up by an id and
used without taking a ref are when initializing or deinitializing the
list of channels.
Jira NVGPU-1460
Change-Id: I0a30968d17c1e0784d315a676bbe69c03a73481c
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1955400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently has_timedout variable is protected by wmb at places
where it is being set and there is no correspoding rmb whenever
has_timedout variable is read. This is prone to errors for
concurrent execution. This change is supposed to fix this issue.
Rename has_timedout variable of channel struct to ch_timedout.
Also to avoid rmb every time ch_timedout is read,
ch_timedout_spinlock is added to protect ch_timedout
variable for taking care of concurrent execution.
Bug 2404865
Bug 2092051
Change-Id: I0bee9f50af0a48720aa8b54cbc3af97ef9f6df00
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1930935
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 21.15 prohibits use of memcpy() with incompatible ptrs
to qualified/unqualified types.
To circumvent this issue we've introduced a new MISRA-compliant
nvgpu_memcpy() function.
This change switches non-offending memcpy usage in vgpu/* code
over to to use nvgpu_memcpy() with appropriate casts applied
to maintain consistency within nvgpu.
JIRA NVGPU-849
Change-Id: Ib62d77929d60bbda64c51d3d81adf66ed155a8a9
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1946262
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-15.6 requires that all if-else blocks and loop blocks
be enclosed in braces, including single statement blocks. Fix errors
due to single statement if-else and loop blocks without braces
by introducing the braces.
JIRA NVGPU-775
Change-Id: Ib70621d39735abae3fd2eb7ccf77f36125e2d7b7
Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1928745
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in GPU specific files.
JIRA NVGPU-1036
Change-Id: Iefadc38bdbea4f02de3c24b6ad1c71d6eb0af4bd
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929903
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In vGPU code path, function vgpu_channel_abort_cleanup() does not
obtain channel reference before using the channel structure
(channel_gk20a)
- vgpu_channel_abort_cleanup() is called by vgpu_intr_thread() which
runs commands obtained from interrupt queue from RM server.
- If there is a scenario where gk20a_channel_release() function runs
before guest receives notification from RM server to abort channel
cleanup, channel gets freed before vgpu_channel_abort_cleanup() runs.
- However, because vgpu_channel_abort_cleanup() does not take explicit
reference to the channel, it ends up accessing structures
(such as ch->g) which are set to NULL and thus we end up in a crash.
- This patch explicitly takes reference of channel before
vgpu_channel_abort_cleanup() is called.
- If gk20a_channel_release() runs before vgpu_channel_abort_cleanup()
and ends up freeing channel, we dont get reference to freed
channel in vgpu_channel_abort_cleanup() and thus we return from
function rather than continuing with freed channel as was the case
previously.
Bug 200453473
JIRA EVLR-3411
Change-Id: I311043b2231336616b28246531cf8a0dc151b0cd
Signed-off-by: Deepak Bhosale <dbhosale@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932028
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Aparna Das <aparnad@nvidia.com>
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. Implement the following vgpu functions to support clk-arb:
- vgpu_clk_get_range() to return min and max freqs from
supported frequencies
- implement vgpu_clk_get_round_rate() which sets rounded
rate to input rate. Rounding is handled in RM Server
- modify vgpu_clk_get_freqs() to retrieve freq table in IVM
memory instead of copying the value in array as part of cmd
message.
2. Add support for clk-arb related HALs for vgpu.
3. support_clk_freq_controller is assigned true for vgpu
provided guest VM has the privilege to set clock frequency.
Bug 200422845
Bug 2363882
Jira EVLR-3254
Change-Id: I91fc392db381c5db1d52b19d45ec0481fdc27554
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1812379
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_acr to hold acr module related member
within single struct which are currently spread across multiple structs
like nvgpu_pmu, pmu_ops & gk20a.
-Created struct hs_flcn_bl struct to hold ACR HS bootloader specific members
-Created struct hs_acr to hold ACR ucode specific members like bootloader data
using struct hs_flcn_bl, acr type & falcon info on which ACR ucode need to run.
-Created acr ops under struct nvgpu_acr to perform ACR specific operation,
currently ACR ops were part PMU which caused to have always dependence
on PMU even though ACR was not executing on PMU.
-Added acr_remove_support ops which will be called as part of
gk20a_remove_support() method, earlier acr cleanup was part of
pmu remove_support method.
-Created define for ACR types,
-Ops acr_sw_init() function helps to set ACR properties
statically for chip currently in execution & assign ops to point to
needed functions as per chip.
-Ops acr_sw_init execute at early as nvgpu_init_mm_support calls acr
function to alloc blob space.
-Created ops to fill bootloader descriptor & to patch WPR info to ACR uocde
based on interfaces used to bootstrap ACR ucode.
-Created function gm20b_bootstrap_hs_acr() function which is now common
HAL for all chips to bootstrap ACR, earlier had 3 different function for
gm20b/gp10b, gv11b & for all dgpu based on interface needed.
-Removed duplicate code for falcon engine wherever common falcon code can be used.
-Removed ACR code dependent on PMU & made changes to use from nvgpu_acr.
JIRA NVGPU-1148
Change-Id: I39951d2fc9a0bb7ee6057e0fa06da78045d47590
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813231
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of VGPU code is linux specific but lies in common code
So until VGPU code is properly abstracted and made os-independent,
move all of VGPU code to linux specific directory
Handle corresponding Makefile changes
Update all #includes to reflect new paths
Add GPL license to newly added linux files
Jira NVGPU-387
Change-Id: Ic133e4c80e570bcc273f0dacf45283fefd678923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599472
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Modify HAL clk->get_maxfreq() signature to match the one in
clk->set_rate() and clk->get_rate(). It allows support of multiple
clocks.
Implement clk.get_maxfreq operation for vgpu and use it to
fill max_freq field in GPU characteristics query.
JIRA NVGPU-388
Change-Id: I93bfc2aa76e38b8a5e0ac55d87c4e26df6fea77f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1597329
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a hard coded #define for map_buffer_batch_limit and use that
insted of querying from GPU characteristics. Also add an
nvgpu_is_enabled() flag for disabling batch mapping, and set
map_buffer_batch_limit to zero if batch mapping is disabled.
JIRA NVGPU-388
Change-Id: Ic91feea638d0f47c5c22321886cfc75e97259dc3
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593690
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix characteristics for cyclestats:
- SUPPORT_TSG and SUPPORT_CYCLE_STATS_SNAPSHOT were assigned the same value
- For vgpu, SUPPORT_CYCLE_STATS was set redundantly (but differently)
- For vgpu, if the css buffer size is 0, set the support flag to False
JIRA ESRM-88
Bug 200296210
Change-Id: Iaf98dafec55f171b5968c2a8248290284bf30922
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593939
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct gk20a is now part of nvgpu_os_linux in Linux builds. gk20a.c
still frees struct gk20a by kfree(struct gk20a *), which is wrong.
Create a new function pointer in struct gk20a for freeing the
structure and call kfree(struct nvgpu_os_linux *) instead.
JIRA NVGPU-259
Change-Id: I412ee993002cb2a42f0db015fc676de43418ec2f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1591012
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the ctxsw trace "core" API code into <nvgpu/ctxsw_trace.h>. This
is not perect though since there's some Linuxisms present in the HAL
and as such that code has to be hidden by the ctxsw tracing CONFIG. But
this patch should work for QNX such that it will allow the code to
build as long as CONFIG_GK20A_CTXSW_TRACE is not set.
Also fix the copywrite notice in the ctxsw code present under
common/linux to be GPL.
JIRA NVGPU-287
Change-Id: I94715864caf335b7220185492e4629d713b025e0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589429
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of calling the native HAL init function then adding
multiple layers of modification for VGPU, flatten out the sequence
so that all entry points are set statically and visible in a
single file.
JIRA ESRM-30
Change-Id: Ie424abb48bce5038874851d399baac5e4bb7d27c
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574616
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add abstraction of IO aperture accessors. Add new functions
gk20a_io_exists() and gk20a_io_valid_reg() to remove dependencies to
aperture fields from common code.
Implement Linux version of the abstraction by moving gk20a_readl()
and gk20a_writel() to new Linux specific io.c. Move the fields
defining IO aperture to nvgpu_os_linux.
Add t19x specific IO aperture initialization functions and add t19x
specific section to nvgpu_os_linux.
JIRA NVGPU-259
Change-Id: I09e79cda60d11a20d1099a9aaa6d2375236e94ce
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1569698
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
NVGPU_SUBMIT_GPFIFO_FLAGS_RESCHEDULE_RUNLIST causes host to expire
current timeslice and reschedule from front of runlist.
This can be used with NVGPU_RUNLIST_INTERLEAVE_LEVEL_HIGH to make a
channel start sooner after submit rather than waiting for natural
timeslice expiration or block/finish of currently running channel.
Bug 1968813
Change-Id: I632e87c5f583a09ec8bf521dc73f595150abebb0
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: http://git-master/r/#/c/1537198
Reviewed-on: https://git-master.nvidia.com/r/1537198
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
When two or more apps ran simultaneously
First app context sets power_on flag & starts init
Other app context check the power_on flag
and try to use GPU without init completed
Which makes aother apps to assert
Added mutex to synchronize poweron access
Bug 200297265
Change-Id: Ie138f7f43bb0dd3304ed91ae3649a6a4947bee91
Signed-off-by: skadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master/r/1511436
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Convert a few calls from dev_*() logging to nvgpu_*(). This reduces
dependency to Linux specific struct device pointer.
JIRA NVGPU-38
Change-Id: Ib51a6b1287db25b7dd4d164aec3ac75fa2801ebf
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master/r/1507929
GVS: Gerrit_Virtual_Submit
Remove gk20a support. Leave only gk20a code which is reused by other
GPUs.
JIRA NVGPU-38
Change-Id: I3d5f2bc9f71cd9f161e64436561a5eadd5786a3b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master/r/1507927
GVS: Gerrit_Virtual_Submit
