* As of now, working on multiple chip bringup in nvgpu-next repo has
an issue because we end with losing control on source code (hard to
find which part of the code belongs to which chip) and it's valuable
history this affects chip migration on release.
* To support multiple chip bringup simultaneously, we need new
guidelines to avoid losing control on source code and make migration
easier. This change adds links to nvgpu-next repo.
* Updated return code to ENODEV for consistency
* Updated ACR unittest to work with ENODEV return code
NOTE:
These are the initial set of infrastructure changes, guidelines
will evolve, and source code will get updated accordingly.
Based on future chip features, Which part of the source code falls
under nvgpu-next repo is decided.
JIRA NVGPU-6574
Change-Id: I81827e35d189c55554df00e255b527a4473e0338
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556793
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extend the runtime suspend/resume based idle/unidle logic in the
probe case to handling done in gk20a_do_idle/unidle for nvgpu
after the probe completion.
If the railgating is disabled, setting autosuspend_delay to 0 will
enable the suspend. If railgating is enabled, autosuspend delay
will be > 0. Setting it to 0 will enable the immediate suspend.
With this approach based on RPM, forced_reset logic is removed.
force_reset_in_do_idle is also removed as railgating is
supported.
Bug 200602747
JIRA NVGPU-5356
Change-Id: Iaf6d5ab651b8200f0547b45d90f812110cf63c0e
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375941
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Aggressive sync destroy is used on some platforms where the amount of
syncpoints is limited. It can cause sync objects to get allocated and
freed in the submit path and when jobs are cleaned up, so require
deferred cleanup. Allocations do not belong to job tracking in a
deterministic submit path.
Although this has been technically allowed before, deterministic
channels have likely not been a priority on those old platforms with
aggressive sync destroy set.
Update virtualized gp10b platform data to match on a gp10b-vgpu compat
string instead of gk20a-vgpu. gk20a (Tegra T124) hasn't been supported
for a long time. Delete the aggressive sync destroy field from this
platform. It's got enough syncpoints to not dynamically allocate them;
having this property set for gp10b-vgpu has likely been a mistake.
This is not a completely pure cherry-pick: also extend the gpu
characteristics to not advertise full deterministic submit support when
aggressive sync destroy is off. This platform flag cannot be adjusted by
the user unlike many other flags.
Jira NVGPU-4548
Change-Id: I283f546d48b79ac94b943d88e5dce55710858330
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2322042
(cherry picked from commit b1ba2b997b2174e365bcb0782ef3e67260ff9e57)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328411
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
tegra_get_chip_id is going to be deprecated soon and this patch removes
calls to it. Chip-ID is already read via DT and call to
tegra_get_chip_id() can be avoided by adding metadata to store the
Chip-ID information in struct gk20a_platform.
Bug 200524194
Bug 200551105
Change-Id: I5f9f5abf679cf9afe98840e20144d76eb0238426
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2236311
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- In GV11B, read fuse_status_opt_tpc_gpc register
to read which TPCs are floorswept.
- The driver will also read sysfs node: tpc_pg_mask
- Based on these two values "can_tpc_powergate" will
be set to true or false and mask will be used to write to
fuse_ctrl_opt_tpc_gpc register to powergate the TPC.
- can_tpc_powergate = true indicates that the mask value
sent from userspace is valid and can be used to power gate
the desired TPC
- can_tpc_powergate = false indicates that the mask value
sent from userspace is not valid and cannot be used to
power gate the desired TPC.
Bug 200532639
Change-Id: Ib0806e4c96305a13b3574e8063ad8e16770aa7cd
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170736
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit e9a6d179a4 ("gpu: nvgpu: cache gpu clk rate")
- Real clock rate doesn't always equal clock rate requested by caller
- call of clk_set_rate() and update of cached_rate are not atomic
- Real root cause for Bug 2051688 is in bpmp and gboost design
Bug 2538692
Change-Id: I9248e0c69e2271ed2d0070587db59afa6f8160f2
Signed-off-by: Peng Liu <pengliu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109708
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compatible VBIOS version for PG189 is .5A, but it must still boot
with VBIOS .18 and higher.
Added a vbios_compatible_version field in platform descriptor.
Do not boot if VBIOS version is < vbios_min_version.
Otherwise, warn if VBIOS version is not vbios_compatible_version.
Bug 2500899
Change-Id: Ib6be2d1da96221def7784c28f362b904ce770231
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079527
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Turing board (PG189) variants (A00, A01, A02, A03) need
different dealys for valid power good (PG) signal. To support
all board variants change the delay to minimum required value
of 250ms.
Bug 200452556
JIRA NVGPU-1100
Change-Id: Iba2a6b17dec7552197cb0b7873132d83e9e09aea
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987659
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The GC-OFF feature shall be available only for selective
dGPUs like Volta, etc. To enable this, add a platform flag
to control GC-OFF feature for a given dGPU.
If GC-OFF is not enabled for a dGPU, EPERM error will be
returned by kernel interfaces.
JIRA NVGPU-1100
Change-Id: Ic9e4492b2bb8916d520e78ecb6a500ccd349b70c
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1923249
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Background:
In Hypervisor mode dGPU device is configured in pass through mode for
the Guest (QNX/Linux). GMMU programming is handled by the guest which
converts a mapped buffer's GVA into SGLes in IPA (Intermediate/Guest
Physical address) which is then translated into PA (Acutual Physical
address) and programs the GMMU PTEes with correct GVA to PA mapping.
Incase of the vgpu this work is delegated to the RM server which takes care
of the GMMU programming and IPA to PA conversion.
Problem:
The current GMMU mapping logic in the guest assumes that PA range is
continuous over a given IPA range. Hence, it doesn't account for holes being
present in the PA range. But this is not the case, a continous IPA range
can be mapped to dis-contiguous PA ranges. In this situation the mapping
logic sets up GMMU PTEes ignoring the holes in physical memory and
creates GVA => PA mapping which intrudes into the PA ranges which are
reserved. This results in memory being corrupted.
This change takes into account holes being present in a given PA range and
for a given IPA range it also identifies the discontiguous PA ranges and
sets up the PTE's appropriately.
Bug 200451447
Jira VQRM-5069
Change-Id: I354d984f6c44482e4576a173fce1e90ab52283ac
Signed-off-by: aalex <aalex@nvidia.com>
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850972
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The power rail of dGPU is managed with help of a set of
GPIOs. Using those GPIOs add an interface to power off and
power on dGPU.
Before dGPU is powered off, new work is blocked by setting
NVGPU_DRIVER_IS_DYING and current jobs are allowed to finish
by waiting for gpu to be idle.
The tegra PCIe controller driver provided APIs
tegra_pcie_attach_controller() and tegra_pcie_detach_controller()
are used to manage PCIe link shutdown, PCIe refclk management
and PCIe rescan.
JIRA NVGPU-1100
Change-Id: Ifae5b81535f40dceca5292a987d3daf6984f3210
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1749847
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- TPC powergating should be done before
calling gk20a_enable_gr_hw.
gk20a_enable_gr_hw() issues a GR engine reset.
Without this fix, enabling 1 TPC from each PES
causes ctxsw timeout error while running GFX Benchmark.
- Adds valid tpc-pg mask for 1/2/3/4 active TPC configs.
TPC Config - TPC-MASK
4 TPC configuration - 0x0
3 TPC configuration - 0x1/0x2/0x4/0x8
2 TPC configuration - 0x5/0x9/0x6/0xa
- We should not write to gr_fe_tpc_pesmask_r()
as part of TPC-PG sequence. This register is for
debug purpose only.
Bug 200442360
Change-Id: I6fbe1ad8fbc836ace8cbaf00ec3d21a12c73e0bd
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809772
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Update header path of gk20a.h files present in os/
to <nvgpu/gk20a.h>
2) os_fence_android_sema.c indirectly was dependent on gk20a.h via
semaphore.h. So, added #include <nvgpu/gk20a.h> in
os_fence_android_sema.c and replaced the header with forward
declaration of struct gk20a in semaphore.h
Jira NVGPU-597
Change-Id: I96e23befeb80713f3a399071eb5498f6f580211d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842868
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Expose the linux specific clock implementations via the HAL
interface to allow nvgpu to use the controls globally. This patch
does the following.
1) Implement a new ops interface and a corresponding linux specific
implementation for allowing nvgpu to iterate through a list of
available clock frequencies via nvgpu_linux_clk_get_f_points().
2) Implement nvgpu_linux_clk_get_range().
Bug 2061372
Change-Id: I7ce9a999dbdcd9fafcc84301af148545f6ca97a9
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774280
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Adding a comptag_mem_deduct in the platform_gk20a has certain problems:
1) It's not really convenient for platform users to configure it.
2) All products using the same GPU have to share the same configuration.
So this patch moves this comptag_mem_deduct from struct platform_gk20a
to struct gr_gk20a (per device). And it adds an sysfs node for products
or platform users to easily configure from user space.
Note: The comptag memory will not be allocated until the GPU driver goes
through the final poweron routine. So the user space has a small window
to configure this sysfs node.
Bug 2327574
Bug 2284925
Change-Id: Ie7d00b082704e422645c0ea254b59e22f9fc3b7f
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1810334
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The comptag allocates memory based on the available total RAM, which
theoretically should be the MAX physical RAM size however practically
should deduct the part being taken by the running system. Otherwise,
the taken memory part will never get used and wasted.
This change adds a comptag_mem_deduct to each platform and to allow
them to assign the deductible value based on their own use cases so
as to save memory.
Bug 2327574
Bug 2284925
Change-Id: I124e20a66183c22723c34a7ec6ce34832c12f02e
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1804157
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a WAR for gm20b that allows us to force the PMU VM to use
128K large pages. For some reason setting the small page size
to 64K breaks the PMU boot. Unclear why. Bug needs to be filed
and fixed. Once fixed this patch can and should be reverted.
Bug 200105199
Change-Id: I2b4c9e214e2a6dff33bea18bd2359c33364ba03f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1782769
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- adds static tpc-powergating through sysfs.
- active tpc count will remain till the GPU/systems is not booted again.
- tpc_pg_mask can be written only after GPU probe finishes and
GPU boot is triggered.
Note:
To be able to use this feature, we need to change boot/init
scripts of the OS(used with nvgpu driver) to write to sysfs nodes before
posting discover image size query to FECS.
Bug 200406784
Change-Id: Id749c7a617422c625f77d0c1a9aada2eb960c4d0
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1742422
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
