Use the new kmem API functions in gk20a's mm code. Add a struct
gk20a pointer to the dmabuf priv struct so that the cleanup
function has access to the gk20a struct. Also add a gk20a pointer
to some of the sg table functions so that they can use the nvgpu
kmem APIs.
Bug 1799159
Bug 1823380
Change-Id: I85a307c6bf862627c5b1af0e077283b48d78fa72
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1318321
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
ctrl_gk20a.c had some direct accesses to hardware. These violate the
HAL rules, because we don't have per-GPU ctrl, and thus the code
cannot be made GPU independent.
Move all GR accesses to new GR HALs and use existing bus HAL for
accessing timer. Remove #includes of all hardware headers.
JIRA NVGPU-28
Change-Id: I57e67519f62e9bd6c3e725e1bef6e366190f5834
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1327001
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code that touches host registers and instance block to fifo HAL.
This involves adding HAL ops for the fifo HAL functions that get
called from outside fifo. This clears responsibility of channel by
leaving it only managing channels in software and push buffers.
channel had member ramfc defined, but it was not used, to remove it.
pbdma_acquire_val consisted both of channel logic and hardware
programming. The channel logic was moved to the caller and only
hardware programming was moved.
Change-Id: Id005787f6cc91276b767e8e86325caf966913de9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1322423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the name field from struct gpu_ops up to struct gk20a. The field
is not a function op, so it doesn't belong in gpu_ops.
Replace all uses of dev_name() with use of g->name when possible.
JIRA NVGPU-16
Change-Id: Ic6e99e39258cbf3bb7c806962cbbd7de5126688f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1328534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fifo reset_enable_hw is reorged to clear and enable pbdma/fifo interrupts
after all the required configuration such as configuring timeouts,
enabling timeout detections are taken care of.
JIRA GPUT19X-74
JIRA GPUT19X-47
Change-Id: Id780cc11d858db18f8d748c037954ede73298506
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325351
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Use the new kmem API functions in gm20b/*. Also add a struct gk20a
pointer to
lsfm_free_ucode_img_res()
lsfm_free_nonpmu_ucode_img_res()
so nvgpu_kfree() works.
Bug 1799159
Bug 1823380
Change-Id: I3373600455553710adb14e0fb5743bf197095a03
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1318320
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Clean up gk20a.c by removing direct accesses to MC and moving the
accesses to happen via MC HAL.
The chip detection logic has to violate the HAL and call gk20a
version directly, because HAL ops cannot be set up before chip has
been identified.
Change-Id: I4cdd0ef3fcf7d3b561a3fca4247a8356fe8d18e1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
After driver remove, the device structure passed in gk20a_busy can be
invalid. To solve this the prototype of the function is modified to pass
the gk20a struct instead of the device pointer.
bug 200277762
JIRA: EVLR-1023
Change-Id: I08eb74bd3578834d45115098ed9936ebbb436fdf
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320194
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Init device_fatal, channel_fatal and restartable fifo intr pbdma s/w
variables for pbdma_intr_0 interrupt masks for each GPU version separately
pbdma_intr_0 field differences for each GPU version:-
-gk20a : bit 28 does not exists in hw
-gm20b : bit 8(lbreq), 20(xbarconnect) and 28 do not exist in hw
-gp10b : bit 8(lbreq), 20(xbarconnect) do not exist in hw. bit 28,
(syncpoint_illegal) added in hw but is not being handled.
-gk20a/gm20b/gp10b
bit 24 eng_reset and bit 25 semaphore always existed in hw but never
handled
JIRA GPUT19X-47
Change-Id: I209191f57c5ea5b15081b7dc2411801d3537017c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Don't use enum dma_attr in the gk20a_gmmu_alloc_attr* functions, but
define nvgpu-internal flags for no kernel mapping, force contiguous, and
read only modes. Store the flags in the allocated struct mem_desc and
only use gk20a_gmmu_free, remove gk20a_gmmu_free_attr. This helps in OS
abstraction. Rename the notion of attr to flags.
Add implicit NVGPU_DMA_NO_KERNEL_MAPPING to all vidmem buffers
allocated via gk20a_gmmu_alloc_vid for consistency.
Fix a bug in gk20a_gmmu_alloc_map_attr that dropped the attr
parameter accidentally.
Bug 1853519
Change-Id: I1ff67dff9fc425457ae445ce4976a780eb4dcc9f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1321101
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Move all programming of FB to fb_*.c files, and remove the inclusion
of FB hardware headers from other files.
TLB invalidate function took previously a pointer to VM, but the new
API takes only a PDB mem_desc, because FB does not need to know about
higher level VM.
GPC MMU is programmed from the same function as FB MMU, so added
dependency to GR hardware header to FB.
GP106 ACR was also triggering a VPR fetch, but that's not applicable
to dGPU, so removed that call.
Change-Id: I4eb69377ac3745da205907626cf60948b7c5392a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1321516
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move clock APIs from gk20a_platform to gpu_ops. At the same time
allow use of internal get_rate/set_rate for querying both GPCCLK
and PWRCLK on iGPU.
At the same time we can replace calls to clk framework with the
new HAL and drop direct dependency to clk framework.
gp10b ops were replaced as a whole at HAL initialization. That
replaces anything set in platform probe stage, so reduce that to
touch only clock gating regs.
Change-Id: Iaf219b1f000d362dbf397d45832f52d25463b31c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1300113
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Read fuse values from GPU's own fuse registers instead of Tegra fuse
registers whenever possible. This reduces the number of dependencies
to Linux fuse code.
Some fuses do not have a corresponding register in GPU, so they're
left as is.
Change-Id: Id9f2f4da897f3e20b20c300a67f705e3fa5ba35a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1318278
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
JIRA: EVLR-1004
(*) Refactor the non-stalling interrupt path to execute clear on the
top half, so on dGPU case processing of stalling interrupts does not
block non-stalling one.
(*) Use a worker thread to do semaphore wakeups and allow batching of
the non-stalling operations.
(*) Fix a bug where some gpus will not properly track the completion
of interrupts, preventing safe driver unloads
Change-Id: Icc90a3acba544c97ec6a9285ab235d337ab9eefa
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1312796
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Navneet Kumar <navneetk@nvidia.com>
Add ability to suspend/resume contexts for a debug session
(NVGPU_DBG_GPU_IOCTL_SUSPEND_RESUME_CONTEXTS), in virtualized
case:
- added hal function to resume contexts.
- added vgpu support for suspend contexts, i.e. build a list
of channel ids, and send TEGRA_VGPU_CMD_SUSPEND_CONTEXTS
- added vgpu support for resume contexts, i.e. build a list
of channel ids, and send TEGRA_VGPU_CMD_RESUME_CONTEXTS
Bug 1791111
Change-Id: Icc1c00d94a94dab6384ac263fb811c00fa4b07bf
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1294761
(cherry picked from commit d17a38eda312ffa92ce92e5bafc30727a8b76c4e)
Reviewed-on: http://git-master/r/1299059
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Cory Perry <cperry@nvidia.com>
Tested-by: Cory Perry <cperry@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
-Moved ACR interface headers from acr_gm20b.h/acr_gp106.h to
Its specific header files under drivers/gpu/nvgpu/include/nvgpu/acr/
Folder.
- nvgpu_acr.h - Top-level header-file which include ACR interfaces
headers & defines required to communicate with ACR, including this
header file is good to get access into ACR interface & made changes
accordingly,
-Deleted acr.h & acr_t18x.h as not required anymore
& removed its include from dependent files.
Jira NVGPU-19
Change-Id: Ie404043cfe1ab32404eb63a43831f470d8436324
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1304748
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of using Linux APIs for mutex and spinlocks
directly, use new APIs defined in <nvgpu/lock.h>
Replace Linux specific mutex/spinlock declaration,
init, lock, unlock APIs with new APIs
e.g
struct mutex is replaced by struct nvgpu_mutex and
mutex_lock() is replaced by nvgpu_mutex_acquire()
And also include <nvgpu/lock.h> instead of including
<linux/mutex.h> and <linux/spinlock.h>
Add explicit nvgpu/lock.h includes to below
files to fix complilation failures.
gk20a/platform_gk20a.h
include/nvgpu/allocator.h
Jira NVGPU-13
Change-Id: I81a05d21ecdbd90c2076a9f0aefd0e40b215bd33
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1293187
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In two places we used broadcast register as base, but added the
unicast offset to it. This causes the write to go well beyond
valid register range.
Change the broadcast base to use unicast base instead in sequence
to resume a single SM and to record error state of SM.
Bug 200256272
Change-Id: I4ca9af2bb5877dba20ab96575f5094d42949c9e2
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
(cherry-picked from commit 04177b3414535ce5092c8baeae29883bada9d36c)
Reviewed-on: http://git-master/r/1306331
Reviewed-by: Automatic_Commit_Validation_User
Move semaphore_gk20a.c drivers/gpu/nvgpu/common/ since the semaphore
code is common to all chips.
Move the semaphore_gk20a.h header file to drivers/gpu/nvgpu/include/nvgpu
and rename it to semaphore.h. Also update all places where the header
is inluced to use the new path.
This revealed an odd location for the enum gk20a_mem_rw_flag. This should
be in the mm headers. As a result many places that did not need anything
semaphore related had to include the semaphore header file. Fixing this
oddity allowed the semaphore include to be removed from many C files that
did not need it.
Bug 1799159
Change-Id: Ie017219acf34c4c481747323b9f3ac33e76e064c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1284627
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Move nvgpu_common.c to drivers/gpu/nvgpu/common since it is a common
C file to all drivers.
Similarly move nvgpu_common.h to drivers/gpu/nvgpu/include/nvgpu since
this follows the new include guidelines.
Bug 1799159
Change-Id: I00ebed289973b27704c2cff073526e36505bf699
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1284612
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
DVFS constraints for GPU are applied on gbus not on gpcclk. Make T210
K4.4 use gm20b.gbus to change the GPU clk rates and use its parent
clock gbus while querrying DVFS constraints for the GPU.
Bug 200233943
Change-Id: I2bad3266d6b8f8f3806a0d4249d9b40308c2ee6a
Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com>
Reviewed-on: http://git-master/r/1275926
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the sw initialization of gpcclk to probe time so that gpcclk is
ready to use before first rail ungate. Change is applicable only for
platforms with CCF enabled.
Bug 200233943
Change-Id: I7b322215041c0b88e9e2a37567af408fbbc31dc1
Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com>
Reviewed-on: http://git-master/r/1280830
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The fuse headers are unified and moved all the content of
linux/tegra-fuse.h to the soc/tegra/fuse.h to have the
single fuse header for Tegra.
Use unified fuse header soc/tegra/fuse.h.
bug 200260692
Change-Id: Icab3ba5c3dbcd3fa831455c2f336942d356ff5ac
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/1287498
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Setting timeslice for virtualized case was not effective,
because both ioctls NVGPU_TSG_IOCTL_SET_TIMESLICE and
NVGPU_SCHED_IOCTL_TSG_SET_TIMESLICE were calling the
native function to set TSG timeslice.
- Fixed wrapper function to call HAL
- Defined HAL function for "native" set TSG timeslice
- Also, properly update timeout_us in TSG context, in
virtualized case.
This change also moves the min/max bounds checking for
tsg timeslice into the native function implementation.
There is no sysfs node for these parameters for vgpu,
as RM server is ultimately responsible for this check.
Bug 200263575
Change-Id: Ibceab9427561ad58ec28abfff0c96ca8f592bdb9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1283180
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Move the gm20b HW headers to a new directory specially for them:
include/nvgpu/hw/gm20b
And change the code to include like so:
#include <nvgpu/hw/gm20b/hw_fb_gm20b.h>
This is part of the process to restructure the nvgpu driver.
Bug 1799159
Change-Id: I0765e2f6bcd5aa1e803efd250056de3cf9bfa7ed
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1244791
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reorganize the HW headers of gk20a. The headers are moved to a
new directory:
include/nvgpu/hw/gk20a
And from the code are included like so:
#include <nvgpu/hw/gk20a/hw_pwr_gk20a.h>
This is the first step in reorganizing all of the HW headers for
gm20b, gm206, etc. This is part of a larger effort to re-structure
and make the driver more readable and scalable.
Bug 1799159
Change-Id: Ic151155cbc2e6f75009f2d9d597b364a1bed2c4c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1244790
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In lsfm_discover_ucode_images(), we currently collect
pmu ucode details with API pmu_ucode_details()
But if this API fails, we still continue loading
other firmwares
In case loading of pmu firmware fails due to some reason,
we should actually bail out immediately with error
Also, remove unnecessary chekc (ucode_img.lsf_desc != NULL)
since pmu_ucode_details() ensures that this cannot be
NULL
Bug 200265373
Change-Id: I68e7f9575e2a07b473ceacc528a5d172b58d6fb6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1276555
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We use GPU reference clock as a divider. Check before division that
reference clock is not zero.
Change-Id: Ie453a78b422b2e740daeb7c12ce5b06faa52ba76
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1275743
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
voltage_get() defines det_out as u32. That variable is used to
calculate a 64-bit result, so cast det_out to u64.
Change-Id: I054ec299a4c7961cb38dd5ac0cbf0ac173b09efb
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1267692
GVS: Gerrit_Virtual_Submit
Reviewed-by: Thomas Fleury <tfleury@nvidia.com>
- Added enable_mscg, mscg_enabled & mscg_stat flags,
mscg_enabled flag can be used to controll
mscg enable/disable at runtime along with mscg_stat flag.
- Added defines & interface to support ms/mclk-change/post-init-param
- Added defines for lpwr tables read from vbios.
- HAL to support post init param which is require
to setup clockgating interface in PMU & interfaces used during
mscg state machine.
- gk20a_pmu_pg_global_enable() can be called when pg support
required to enable/disable, this also checks & wait
if pstate switch is in progress till it complets
- pg_mutex to protect PG-RPPG/MSCG enable/disable
JIRA DNVGPU-71
Change-Id: If312cefc888a4de0a5c96898baeaac1a76e53e46
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1247554
(cherry picked from commit e6c94948b8058ba642ea56677ad798fc56b8a28a)
Reviewed-on: http://git-master/r/1270971
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
