Many tests used various incarnations of the mock register framework.
This was based on a dump of gv11b registers. Tests that greatly
benefitted from having generally sane register values all rely
heavily on this framework.
However, every test essentially did their own thing. This was not
efficient and has caused a some issues in cleaning up the device and
host code.
Therefore introduce a much leaner and simplified register framework.
All unit tests now automatically get a good subset of the gv11b
registers auto-populated. As part of this also populate the HAL with
a nvgpu_detect_chip() call. Many tests can now _probably_ have all
their HAL init (except dummy HAL stuff) deleted. But this does
require a few fixups here and there to set HALs to NULL where tests
expect HALs to be NULL by default.
Where necessary HALs are cleared with a memset to prevent unwanted
code from executing.
Overall, this imposes a far smaller burden on tests to initialize
their environments.
Something to consider for the future, though, is how to handle
supporting multiple chips in the unit test world.
JIRA NVGPU-5422
Change-Id: Icf1a63f728e9c5671ee0fdb726c235ffbd2843e2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, setup_sw_s2 case of test_gv11b_mm_mmu_fault_setup_sw() in
hal.mm.mmu_fault fails for L4T OS. setup_sw_s2 test case executes
gv11b_mm_mmu_fault_info_mem_destroy() twice consecutively. This makes
the test acquire hub_isr_mutex after being destroyed; leading to failure
This patch removes setup_sw_s2 case to resolve this error. Local GCOV
report shows that there is no change in coverage with this change.
Jira NVGPU-4780
Change-Id: I7b9470180d8f3146ac09318ed34281f723cc7e1a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2302212
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Allow only usermode submit, check for gpfifo max size.
-Map buffer offset must be page aligned and in multiple of page size.
-Check for unmapped address whether it's alloced or not.
-Offset in alloc space must be multiple of page size.
-Free space offset must be in the range of alloced space.
Jira NVGPU-4470
Change-Id: I9d5e4eb121d6d462f8b8d17b31c839b34d7d6c1d
Signed-off-by: shashank singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298188
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, GVS is failing intermittently for some tests in nvgpu-runlist
and hal/mm/mmu_fault.
This patch resets gk20a structure at the end of each mmu_fault test. The
test_runlist_reload_ids and test_runlist_update_locked tests are
modified to use fifo support environment initialized for nvgpu-runlist
unit test.
Bug 2791755
Change-Id: I0b69b4f216f8f820b0a480ed76170b523b434bef
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2265676
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 11.2 doesn't allow conversions of a pointer from or to an
incomplete type. These type of conversions may result in a pointer
aligned incorrectly and may further result in undefined behavior.
This patch addresses rule 11.2 violations related to pointers to and
from struct nvgpu_sgl. This patch replaces struct nvgpu_sgl pointers by
void pointers.
Jira NVGPU-3736
Change-Id: I8fd5766eacace596f2761b308bce79f22f2cb207
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2267876
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fbpa related functions are not supported on igpu safety. Don't
compile them if CONFIG_NVGPU_DGPU is not set.
Also compile out fb and ramin hals that are dgpu specific.
Update the tests for the same.
JIRA NVGPU-4529
Change-Id: I1cd976c3bd17707c0d174a62cf753590512c3a37
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2265402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The two MM functions nvgpu_set_pd_level() and nvgpu_vm_do_free_entries()
are simple recursive functions for processing page descriptors (PDs) by
traversing the levels in the PDs. MISRA Rule 17.2 prohibits functions
calling themselves because "unless recursion is tightly controlled, it
is not possible to determine before execution what the worst-case stack
usage could be." So, this change limits the recursion depth of each of
these functions to the maximum number of page table levels by checking
the level against the MM HAL max_page_table_levels().
This also required configuring this HAL in various unit tests as they
were no previously using this HAL.
JIRA NVGPU-3489
Change-Id: Iadee3fa5ba9f45cd643ac6c202e9296d75d51880
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224450
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch brings a number of changes to the mm.vm unit test:
- test_map_buf: add steps to check for error cases and increase
coverage.
- test_map_buf_gpu_va: add steps to check for error cases and
increase coverage.
- test_init_error_paths: new test to target all possible error
paths in the VM init code.
- test_map_buffer_error_cases: new test to target all possible
error paths in the buffer mapping logic.
- test_nvgpu_vm_alloc_va: new test to target the nvgpu_vm_alloc_va
API and also target error paths.
- test_vm_bind: new test to target the nvgpu_vm_bind_channel API
and also target error paths.
- test_vm_aspace_id: new test to target the vm_aspace_id API
and also target error paths.
JIRA NVGPU-909
Change-Id: I755c89a6de09376d2624130a98966c172d850bfe
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2217679
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch adds unit testing for the mm.as unit including:
- feature tests
- error injection testing
- 100% line coverage and 96% branches (one missing branch that
cannot be tested or removed)
JIRA NVGPU-917
Change-Id: I54bdac21e56554d1d960955f1a140ab98c9f3e5e
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2194399
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
