Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch replaces "nvgpu_current_time_ms" with "nvgpu_hr_timestamp_us".
- "nvgpu_hr_timestamp_us" gives timestamp in microseconds and has better
accuracy than "nvgpu_current_time_ms" (which gives timestamp in millisecond)
Bug 200503143
Change-Id: I6a10e8e1b3e8ff842aa23f58bf2ba9344af232a6
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2125959
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below hals since the corresponding functions are same on all
platforms and they are h/w independent
g->ops.gr.enable_ctxsw()
g->ops.gr.disable_ctxsw()
g->ops.gr.reset()
Call the functions directly at all places
Remove CONFIG_NVGPU_DEBUGGER from places where these functions are
called since they are not debugger dependent
This also helps to disable CONFIG_NVGPU_DEBUGGER and to keep recovery
sequence intact
Jira NVGPU-3506
Change-Id: Id2b208ca23dc4667e78edcd8ad242a8558e0ff64
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In TU104 tsense is not calibrated and tsosc needs to be used.
Tsosc is the POR for TU104.
This patch does the following
Remove the GP106 related thermal header and Add TU104 therm.
Rename the files from therm_gp106 to therm_tu104.
Update the debug fs interface to reflect the same.
Update the yaml files.
Bug 200526122
Change-Id: I73fd7d4c516426b5c6b84762480be2d6d572d5a7
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2135139
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the nvgpu_init_mutex function return void.
In linux case, this doesn't affect anything since mutex_init
returns void.
For posix, we assert() and die if pthread_mutex_init fails.
This alleviates the need to error inject for _every_
nvgpu_mutex_init function in the driver.
Jira NVGPU-3476
Change-Id: Ibc801116dc82cdfcedcba2c352785f2640b7d54f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130538
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix Rule 16.1 and 16.6 violations:
Every switch statement shall have at least two
switch-clauses
- Fix Rule 15.6 violations:
The body of an iteration statement shall be a
compound statement.
- Fix Rule 17.7 violations:
The return value of a non-void function shall
be used.
JIRA NVGPU-3546
Change-Id: I475d185945f0998d4d359f4b9ded6e983474f01f
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127923
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move some interrupt handling hals from hal.gr.gr unit to hal.gr.intr
unit as below
g->ops.gr.intr.set_hww_esr_report_mask()
g->ops.gr.intr.handle_tpc_sm_ecc_exception()
g->ops.gr.intr.get_esr_sm_sel()
g->ops.gr.intr.clear_sm_hww()
g->ops.gr.intr.handle_ssync_hww()
g->ops.gr.intr.log_mme_exception()
g->ops.gr.intr.record_sm_error_state()
g->ops.gr.intr.get_sm_hww_global_esr()
g->ops.gr.intr.get_sm_hww_warp_esr()
g->ops.gr.intr.get_sm_no_lock_down_hww_global_esr_mask()
g->ops.gr.intr.get_sm_hww_warp_esr_pc()
g->ops.gr.intr.tpc_enabled_exceptions()
g->ops.gr.intr.get_ctxsw_checksum_mismatch_mailbox_val()
Rename gv11b_gr_sm_offset() to nvgpu_gr_sm_offset() and move to
common.gr.gr unit
All of above functions and hals will be needed in safety build
Jira NVGPU-3506
Change-Id: I278d528e4b6176b62ff44eb39ef18ef28d37c401
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127753
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPC MMU debug mode should be set if at least one channel
in the TSG has requested it. Add refcounting for MMU debug
mode, to make sure debug mode is disabled only when no
channel in the TSG is using it.
Bug 2515097
Change-Id: Ic5530f93523a9ec2cd3bfebc97adf7b7000531e0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2123017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following:
(1) Removes the usage of hw headers in SDL unit. For this purpose, it moves
the initialization required for errors that can be injected using hw
support, error injection function. Further, it passes the required
information to SDL via hal layers.
(2) Renames (i) PWR as PMU, (ii) nvgpu_report_ecc_parity_err to
nvgpu_report_ecc_err.
Jira NVGPU-3235
Change-Id: I69290af78c09fbb5b792058e7bc6cc8b6ba340c9
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2112837
Reviewed-by: Raghuram Kothakota <rkothakota@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves gops init related to SDL from qnx to common-core. For this
purpose, it does the following changes:
- Adds stub functions for linux and posix.
- Updates nvgpu_init.c for mapping err_ops with report error APIs.
- Updates nvgpu_err.h header file to include prototypes related to error
reporting APIs.
- Updates nvgpu-linux.yaml file to include sdl_stub file.
Jira NVGPU-3237
Change-Id: Idbdbe6f8437bf53504b29dc2d50214484ad18d6f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119681
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PG189 has multiple sensors which can provide interrupt when board
temperature reaches programmed threshold.
This Interrupt is implemented in nvgpu and provide events via clk_arb.
Support is enabled for TU104 with NVGPU_SUPPORT_DGPU_THERMAL_ALERT flag.
Board specific config is added in DT which will be parsed by nvgpu.
Nvgpu does the following.
1.Read gpio line number, interrupt type, and event delay from DT.
2.Call kernel methods and register the interrupt with kernel.
3.Create work queue which will process the interrupt in process context.
4.When interrupt occurs disable interrupt, add work to work queue.
5.In work queue post events and sleep for delay time then enable
Interrupt
Bug 2492512
Change-Id: Ic5694fe366ca492f8afe8a67de4350e9a51af2af
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119411
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.init = gv100_bios_init,
.preos_wait_for_halt = gv100_bios_preos_wait_for_halt,
.preos_reload_check = gv100_bios_preos_reload_check,
.devinit = gp106_bios_devinit,
.preos = gp106_bios_preos,
.verify_devinit = NULL,
This was being called as:
g->ops.bios.init(g)
g->ops.bios.preos_wait_for_halt(g)
g->ops.bios.preos_reload_check(g)
g->ops.bios.preos(g)
g->ops.bios.devinit(g)
g->ops.bios.verify_devinit(g)
Change the function access by using sw ops, like:
Create new function: nvgpu_bios_sw_init()
and based on hardware chip call the chip specific
bios sw init function: nvgpu_gv100_bios_sw_init()
and nvgpu_tu104_bios_sw_init()to assign the sw
ops
JIRA NVGPU-2071
Change-Id: Ibfcd9b225a7bc184737abdd94c2e54190fcd90a0
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108526
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Since nvlink support is not required for initial safety release, disable
corresponding functionality.
nvgpu_mss_nvlink_init_credits defn. and call is now compiled out using
CONFIG_TEGRA_NVLINK config option.
JIRA NVGPU-3062
Change-Id: I402ed123f07f96125d640fb340957da4828d714a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119584
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed gk20a_channel_* APIs to nvgpu_channel_* APIs.
Removed unused channel API int gk20a_wait_channel_idle
Renamed nvgpu_channel_free_usermode_buffers in os/linux-channel.c to
nvgpu_os_channel_free_usermode_buffers to avoid conflicts with the API
with the same name in channel unit.
Jira NVGPU-3248
Change-Id: I21379bd79e64da7e987ddaf5d19ff3804348acca
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2121902
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added NVGPU_DBG_GPU_IOCTL_SET_CTX_MMU_DEBUG_MODE ioctl to set MMU
debug mode for a given context.
Added gr.set_mmu_debug_mode HAL to change NV_PGPC_PRI_MMU_DEBUG_CTRL
for a given channel. HAL implementation for native case is
gm20b_gr_set_mmu_debug_mode. It internally uses regops, which directly
writes to the register if the context is resident, or writes to
gr context otherwise.
Added NVGPU_SUPPORT_SET_CTX_MMU_DEBUG_MODE to enable the feature.
NV_PGPC_PRI_MMU_DEBUG_CTRL has to be context switched in FECS ucode,
so the feature is only enabled on TU104 for now.
Bug 2515097
Change-Id: Ib4efaf06fc47a8539b4474f94c68c20ce225263f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110720
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix 8.2 violation for not specifying parameter name in prototype of
secure_alloc().
Fix 21.3 & 21.8 violations for using reserved names "free" and "exit."
Fix 8.6 and 21.2 violations for __gk20a_do_idle() and
__gk20a_do_unidle() by renaming the functions and wrapping them in a
missing #ifdef CONFIG_PM.
Fix 5.7 violation for reusing "class" as parameter name when already
defined as a struct.
JIRA NVGPU-3343
Change-Id: I976e95a32868fa0a657f4baf0845a32bd7aceb9e
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2117913
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This fixes MISRA rule 4.7 violations in the function nvgpu_vm_map(). The
violations were caused by trying to use ERR_PTR() to return error
information. Rather than try to return errors in a pointer, just change
the API to return an int and pass the pointer the arguments.
JIRA NVGPU-3332
Change-Id: I2852a6de808d9203b8c7826e2b8211bab97ccd16
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2114027
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 21.2 prohibits naming identifiers beginning with a double
underscore. This updates the function names __nvgpu_check_gpu_state()
and __gk20a_warn_on_no_regs() to comply.
JIRA NVGPU-3318
Change-Id: Ied2d168272a0f45fb8a08dda0e6fc798ebe3d22d
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2114656
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Modified PMU subunits init sequence as they required during PMU RTOS
initialize stage, function nvgpu_pmu_early_init() allocates space for
all its subunit & its default values for further usage during runtime,
and function nvgpu_pmu_init() performs setup for sub units & starts
PMU-RTOS boot.
Deinit of all sub units allocated space will handled as part of
remove_support stage & also, during init stage upon failure of
init/setup sequence.
JIRA NVGPU-1972
Change-Id: I3ead9f9bb9e9c1178a02fc99eeec276660477325
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110154
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 11.2 doesn't allow conversion to or from an incomplete type
pointer, as it may result incorrect point alignment and may further lead
to undefined behavior.
MISRA Rule 16.x requires all switch statements to be well-formed with
terminating break statement for every switch-clause.
This patch fixes 11.2 and 16.x violations in common.mm.nvgpu_mem.
Jira NVGPU-3339
Change-Id: I002393cc64d44826e6954d1bf6af71bd569e862f
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2113096
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
