MISRA Rule 10.4 only allows the usage of arithmetic operations on
operands of the same essential type category.
Adding "U" at the end of the integer literals to have same type of
operands when an arithmetic operation is performed.
This fixes violation where an arithmetic operation is performed on
signed and unsigned int types.
JIRA NVGPU-992
Change-Id: Ic9a911beb6d161df950ca85eb4813547603a8743
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809751
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 21.2 doesn't allow the use of macro names which start with
an underscore. These leading underscores are to be removed from the
macro names. This patch will fix such violations in ctrl by renaming
them to follow the convention, 'NVGPU_PARENT-DIR_HEADER-NAME' when
there is no keyword repetition between file name and directory or
'NVGPU_HEADER-NAME' when there is repetition.
JIRA NVGPU-1028
Change-Id: Ia7e5bf76dd2a8689e365bdeb27eac4b6e9ca4cfd
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1815657
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added support for single rail multi step volt policy & below
are the list of define & struct added/updated to support same.
CTRL_VOLT_POLICY_TYPE_SINGLE_RAIL_MULTI_STEP 0x04,
NV_VBIOS_VOLTAGE_POLICY_1X_ENTRY_TYPE_SINGLE_RAIL_MULTI_STEP 0x04,
Updated struct vbios_voltage_policy_table_1x_entry,
struct nv_pmu_volt_volt_policy_sr_multi_step_boardobj_set, this holds
members which help to config single rail multi step like delay
between switch step, ramp up & ramp down step size in uv.
- Added case to support SINGLE_RAIL_MULTI_STEP in
volt_volt_policy_construct() based on boardobj type.
- Added case to support SINGLE_RAIL_MULTI_STEP in
volt_get_volt_policy_table() to read data from VBIOS
table vbios_voltage_policy_table_1x_entry & extract to
voltage_policy_single_rail_multi_step.
- Added methods to forward single rail multi step data to
PMU using below methods by assigning data read from
VBIOS voltage_policy_single_rail_multi_step to
nv_pmu_volt_volt_policy_sr_multi_step_boardobj_set
interface.
volt_construct_volt_policy_single_rail_multi_step()
volt_policy_pmu_data_init_sr_multi_step()
volt_policy_pmu_data_init_single_rail()
construct_volt_policy_single_rail()
Change-Id: I17bc8c320777191611365ee63274c38ffe5ecbf7
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1660687
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Created volt ops under pmu_ver to support volt_set_voltage,
volt_get_voltage & volt_send_load_cmd_to_pmu.
- Renamed volt load, set_voltage & get_voltage gp10x method names.
- Added new volt load, set_voltage & get_voltage methods for gv10x
using RPC & added code to handle ack in pmu_rpc_handler() along
with struct rail_list changes.
- Updated volt ops of gp106 & gv100 to point to respective methods.
- Added member volt_dev_idx_ipc_vmin & volt_scale_exp_pwr_equ_idx to
"struct nv_pmu_volt_volt_rail_boardobj_set" & "struct voltage_rail"
made changes to update members as needed.
- Added member volt_scale_exp_pwr_equ_idx to
"struct vbios_voltage_rail_table_1x_entry" to read
value from VBIOS table & update rail boardobj set interface.
- Defines for volt RPC "NV_PMU_RPC_ID_VOLT_*"
- Define struct's volt load, set_voltage & get_voltage to execute
volt RPC.
Change-Id: I4a41adcf7536468beaa8a73f551b1d608aabd161
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1659728
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
JIRA DNVGPU-118
move vidmem allocation for pmuboardobj to cmd specific
functions and do a copy of data from pmu incase of
getstatus. fixes for getstatus boardobjgrp implementation
and added one #define for rail id to make getstatus of vf table
more meaningful
Change-Id: I366a022c13e51e823116ce2354794babc48981a2
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/1209841
(cherry picked from commit 8c12599f801decc77bbc1acfd1937dfefb21f35e)
Reviewed-on: http://git-master/r/1231839
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
