Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Get number of SMs from GR instance specific nvgpu_gr_config pointer
instead of global SM count in below functions :
nvgpu_gr_fs_state_init()
gv11b_gr_init_sm_id_config()
Update nvgpu_gr_config_get_gpc_skip_mask() to return 0 in case gpc_index
is greater than available gpc_count. This is not MIG specific, but based
on code review possible even today for existing chips.
See gm20b_gr_init_pd_skip_table_gpc()
Update nvgpu_gr_get_override_ecc_val() to return GR instance specific
value.
Execute gr_init_setup_hw() for each GR instance.
Disable below failing unit tests:
nvgpu_gr_fs_state.test_gr_fs_state_error_injection
nvgpu_gr_init.test_gr_init_hal_config_error_injection
Jira NVGPU-5648
Change-Id: Ie8f1c0c304c634756786d85facf336a5c9ae8195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2410702
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix syntax error in Makefile.sources
- Add missing test_enqueue entry to required_tests.ini
- Add nvgpu-next include path in Makefile.units.common.tmk. This will
provide an option to include nvgpu-next files in userspace build.
Bug 2920876
Change-Id: I5d34a89a66813aa39fb1dbdf19decfbb9c63c7eb
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2377295
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When a pbdma fault needs a channel teardown, do the recovery/teardown
process before acking the pbdma interrupt status back. Acking it causes
the hardware to proceed which could release fences too early before the
involved channel(s) have been found to be broken.
With these host copyengine interrupts, the teardown sequence is light
and proceeds even with the pbdma intr flag still set; there are no
engines to reset when these pbdma launch check interrupts happen. The
bad tsg is just disabled and the channels in it aborted.
A few unit tests are so heavily affected by this refactor that they
would need to be rewritten. They're not strictly needed at the moment,
so do only half of the rewrite: just delete them.
Bug 200611198
Change-Id: Id126fb158b6d05e46ba124cd426389046eedc053
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392669
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The FIFO pbdma map is an array of bit maps that link PBDMAs to runlists.
This array allows other software to query what PBDMA(s) serves a given
runlist. The PBDMA map is read verbatim from an array of host registers.
These registers are stored in a kmalloc()'ed array.
This causes a problem for the device management code. The device
management initialization executes well before the rest of the FIFO
PBDMA initialization occurs. Thus, if the device management code
queries the PBDMA mapping for a given device/runlist, the mapping has
yet to be populated.
In the next patches in this series the engine management code is subsumed
into the device management code. In other words the device struct is
reused by the engine management and all host SW does is pull pointers to
the host managed devices from the device manager. This means that all
engine initialization that used to be done on top of the device
management needs to move to the device code.
So, long story short, the PBDMA map needs to be read from the registers
directly, instead of an array that gets allocated long after the device
code has run.
This patch removes the pbdma map array, deletes two HALs that managed
that, and instead provides a new HAL to query this map directly from
the registers so that the device code can use it.
JIRA NVGPU-5421
Change-Id: I5966d440903faee640e3b41494d2caf4cd177b6d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2361134
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Fix what unit tests can be easily fixed, but disable some others. It's
not clear why the MM related tests started failing - there's really zero
reason for this. The list of disable tests are primarily engine related
but there are some others that get inflenced by the device and engine
structure.
test_poweroff.init_poweroff=2
test_is_stall_and_eng_intr_pending.intr_is_stall_and_eng_intr_pending=2
test_isr_nonstall.isr_nonstall=2
test_isr_stall.isr_stall=2
test_engine_enum_from_type.enum_from_type=2
test_engine_find_busy_doing_ctxsw.find_busy_doing_ctxsw=2
test_engine_get_active_eng_info.get_active_eng_info=2
test_engine_get_fast_ce_runlist_id.get_fast_ce_runlist_id=2
test_engine_get_gr_runlist_id.get_gr_runlist_id=2
test_engine_get_mask_on_id.get_mask_on_id=2
test_engine_get_runlist_busy_engines.get_runlist_busy_engines=2
test_engine_ids.ids=2
test_engine_init_info.init_info=2
test_engine_interrupt_mask.interrupt_mask=2
test_engine_is_valid_runlist_id.is_valid_runlist_id=2
test_engine_mmu_fault_id.mmu_fault_id=2
test_engine_mmu_fault_id_veid.mmu_fault_id_veid=2
test_engine_setup_sw.setup_sw=2
test_engine_status.status=2
test_fifo_init_support.init_support=2
test_fifo_remove_support.remove_support=2
test_gp10b_engine_init_ce_info.engine_init_ce_info=2
test_nvgpu_mem_iommu_translate.mem_iommu_translate=2
test_nvgpu_mem_phys_ops.nvgpu_mem_phys_ops=2
And delete unit tests for functions that no longer exist:
test_device_info_parse_enum.top_device_info_parse_enum
test_get_device_info.top_get_device_info
test_get_num_engine_type_entries.top_get_num_engine_type_entries
test_is_engine_ce.top_is_engine_ce
test_is_engine_gr.top_is_engine_gr
JIRA NVGPU-5421
Change-Id: I343c0b1ea44c472b22356c896672153fc889ffc0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355300
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Many tests used various incarnations of the mock register framework.
This was based on a dump of gv11b registers. Tests that greatly
benefitted from having generally sane register values all rely
heavily on this framework.
However, every test essentially did their own thing. This was not
efficient and has caused a some issues in cleaning up the device and
host code.
Therefore introduce a much leaner and simplified register framework.
All unit tests now automatically get a good subset of the gv11b
registers auto-populated. As part of this also populate the HAL with
a nvgpu_detect_chip() call. Many tests can now _probably_ have all
their HAL init (except dummy HAL stuff) deleted. But this does
require a few fixups here and there to set HALs to NULL where tests
expect HALs to be NULL by default.
Where necessary HALs are cleared with a memset to prevent unwanted
code from executing.
Overall, this imposes a far smaller burden on tests to initialize
their environments.
Something to consider for the future, though, is how to handle
supporting multiple chips in the unit test world.
JIRA NVGPU-5422
Change-Id: Icf1a63f728e9c5671ee0fdb726c235ffbd2843e2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When running unit testing, we need to ensure that all expected unit
tests were actually run. This used to be done by an external Python
script, but it is not suitable for some OSes. This patch brings this
mechanism into the unit testing framework, and makes use of an INI
file to provide the list of expected tests.
JIRA NVGPU-3072
Change-Id: I9ed590de9005fe10324c594ea33ebc8fda482019
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2317220
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
