- Fix Rule 16.1 and 16.6 violations:
Every switch statement shall have at least two
switch-clauses
- Fix Rule 15.6 violations:
The body of an iteration statement shall be a
compound statement.
- Fix Rule 17.7 violations:
The return value of a non-void function shall
be used.
JIRA NVGPU-3546
Change-Id: I475d185945f0998d4d359f4b9ded6e983474f01f
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127923
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move some interrupt handling hals from hal.gr.gr unit to hal.gr.intr
unit as below
g->ops.gr.intr.set_hww_esr_report_mask()
g->ops.gr.intr.handle_tpc_sm_ecc_exception()
g->ops.gr.intr.get_esr_sm_sel()
g->ops.gr.intr.clear_sm_hww()
g->ops.gr.intr.handle_ssync_hww()
g->ops.gr.intr.log_mme_exception()
g->ops.gr.intr.record_sm_error_state()
g->ops.gr.intr.get_sm_hww_global_esr()
g->ops.gr.intr.get_sm_hww_warp_esr()
g->ops.gr.intr.get_sm_no_lock_down_hww_global_esr_mask()
g->ops.gr.intr.get_sm_hww_warp_esr_pc()
g->ops.gr.intr.tpc_enabled_exceptions()
g->ops.gr.intr.get_ctxsw_checksum_mismatch_mailbox_val()
Rename gv11b_gr_sm_offset() to nvgpu_gr_sm_offset() and move to
common.gr.gr unit
All of above functions and hals will be needed in safety build
Jira NVGPU-3506
Change-Id: I278d528e4b6176b62ff44eb39ef18ef28d37c401
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127753
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.init = gv100_bios_init,
.preos_wait_for_halt = gv100_bios_preos_wait_for_halt,
.preos_reload_check = gv100_bios_preos_reload_check,
.devinit = gp106_bios_devinit,
.preos = gp106_bios_preos,
.verify_devinit = NULL,
This was being called as:
g->ops.bios.init(g)
g->ops.bios.preos_wait_for_halt(g)
g->ops.bios.preos_reload_check(g)
g->ops.bios.preos(g)
g->ops.bios.devinit(g)
g->ops.bios.verify_devinit(g)
Change the function access by using sw ops, like:
Create new function: nvgpu_bios_sw_init()
and based on hardware chip call the chip specific
bios sw init function: nvgpu_gv100_bios_sw_init()
and nvgpu_tu104_bios_sw_init()to assign the sw
ops
JIRA NVGPU-2071
Change-Id: Ibfcd9b225a7bc184737abdd94c2e54190fcd90a0
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108526
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed gk20a_channel_* APIs to nvgpu_channel_* APIs.
Removed unused channel API int gk20a_wait_channel_idle
Renamed nvgpu_channel_free_usermode_buffers in os/linux-channel.c to
nvgpu_os_channel_free_usermode_buffers to avoid conflicts with the API
with the same name in channel unit.
Jira NVGPU-3248
Change-Id: I21379bd79e64da7e987ddaf5d19ff3804348acca
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2121902
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added NVGPU_DBG_GPU_IOCTL_SET_CTX_MMU_DEBUG_MODE ioctl to set MMU
debug mode for a given context.
Added gr.set_mmu_debug_mode HAL to change NV_PGPC_PRI_MMU_DEBUG_CTRL
for a given channel. HAL implementation for native case is
gm20b_gr_set_mmu_debug_mode. It internally uses regops, which directly
writes to the register if the context is resident, or writes to
gr context otherwise.
Added NVGPU_SUPPORT_SET_CTX_MMU_DEBUG_MODE to enable the feature.
NV_PGPC_PRI_MMU_DEBUG_CTRL has to be context switched in FECS ucode,
so the feature is only enabled on TU104 for now.
Bug 2515097
Change-Id: Ib4efaf06fc47a8539b4474f94c68c20ce225263f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110720
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below 5.7 violations are reported in common.gr.config unit :
nvgpu/drivers/gpu/nvgpu/common/gr/gr_config.c:628:
identifier_reuse: Identifier "sm_info" is already used to represent a type.
Fix them by renaming struct sm_info to struct nvgpu_sm_info
Jira NVGPU-3225
Change-Id: I26f70a4ed2a5a845e0dc9daeb8fb5474e35d42fb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110986
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create a new unit common.fbp which initializes fbp support and provides
APIs to retrieve fbp data.
Create private header with below data
struct nvgpu_fbp {
u32 num_fbps;
u32 max_fbps_count;
u32 fbp_en_mask;
u32 *fbp_rop_l2_en_mask;
};
Expose below public APIs to initialize/remove fbp support:
nvgpu_fbp_init_support()
nvgpu_fbp_remove_support()
vgpu_fbp_init_support() for vGPU
Expose below APIs to retrieve fbp data
nvgpu_fbp_get_num_fbps()
nvgpu_fbp_get_max_fbps_count()
nvgpu_fbp_get_fbp_en_mask()
nvgpu_fbp_get_rop_l2_en_mask()
Use above APIs to retrieve fbp data in all the code.
Remove corresponding fields from struct nvgpu_gr since they are no
longer referred from that structure
Jira NVGPU-3124
Change-Id: I027caf4874b1f6154219f01902020dec4d7b0cb1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108617
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Several of the nvgpu driver capabilities will be disabled in the reduced
version. To know the version of the nvgpu driver we introduce a new
global characteristic flag NVGPU_DRIVER_REDUCED_PROFILE.
JIRA NVGPU-3062
Change-Id: I93c76df1110c24ea0055c77d332fe297d56db65d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108143
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
max_ctxsw_ring_buffer_size variable in struct nvgpu_gr is used to store
max ring buffer size which is then referred into linux specific code
We only use macro GK20A_CTXSW_TRACE_MAX_VM_RING_SIZE to initialize
the variable.
And max_ctxsw_ring_buffer_size does not belong to nvgpu_gr struct
anyways
Considering above remove max_ctxsw_ring_buffer_size from nvgpu_gr and
use macro directly in linux specific code
Jira NVGPU-3125
Change-Id: Ibed9901d2bde35633d9ad0df8bd08b414e075bf4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105653
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently max_css_buffer_size is incorrectly stored in struct nvgpu_gr
Add a new hal g->ops.css.get_max_buffer_size() to get the size and
remove the variable from struct nvgpu_gr
Jira NVGPU-3125
Change-Id: If78fd86559526b84031051e281a98327a46fc11d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make a hal/mm/gmmu sub-unit for the GMMU HAL code. Also move the
gk20a specific HAL code there. gp10b will happen in the next patch.
This change also updates all the GMMU related HAL usage, of which
there is quite a bit. Generally the only change is a .gmmu needs to
be inserted into the HAL path. Each HAL init was also updated.
JIRA NVGPU-2042
Change-Id: I6c46bdfddb8e021f56103d9457fb3e2a226f8947
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.get_preemption_mode_flags() hal is used to fetch information
on supported preemption modes and default preemption mode
Temporary struct nvgpu_preemption_modes_rec is used for this purpose
and is defined in gk20a/gr_gk20a.h right now.
Split above hal into two separate hals and move them to hal.gr.init unit
g->ops.gr.init.get_supported__preemption_modes()
g->ops.gr.init.get_default_preemption_modes()
These hals now return respective flags in pointers passed in function
parameter list, so there is no need to use temporary structure anymore
Hence delete struct nvgpu_preemption_modes_rec
Implement gm20b/gp10b chip specific hals in hal.gr.init unit.
Delete g->ops.gr.get_preemption_mode_flags() hal
Jira NVGPU-3126
Change-Id: I84f507fcd8d122bb7f0ecf697e8b4f16c9339ce1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102455
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of using GPC and TPC counts to allocate memory
to hold sm info, use nvgpu_gr_config_get_no_of_sm() to get
the actual number. This fixes memory issues (corruption and
segmentation fault) seem when nvgpu_gpu_ioctl_wait_for_pause
is used.
Bug 2559631
Change-Id: Idcf9983fbbec7ec7f53835c59164e04bc45cd041
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102557
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to usermode
- fifo.ring_channel_doorbell -> usermode.ring_doorbell
- fifo.doorbell_token -> usermode.doorbell_token
- fifo.usermode_base -> usermode.base
Created the following HAL
- usermode.setup_hw
Jira NVGPU-2978
Change-Id: I856ea24c126fa22d2f3fe860d4b14087c6d7330b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move get_nonpes_aware_tpc hal to hal.gr.init . This hal is
implemented for gv11b.
Update sm_id_numbering hal to pass the gr_config struct pointer
as parameter to avoid dereferencing from gr inside hal.
JIRA NVGPU-2951
Change-Id: I1e06b634cc36741e116e41e581a18c7f5b373945
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093835
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following ltc related data to struct nvgpu_ltc
and has a reference to it from struct gk20a:
struct nvgpu_spinlock ltc_enabled_lock;
u32 max_ltc_count;
u32 ltc_count;
u32 slices_per_ltc;
u32 cacheline_size;
Added function remove_support for ltc and it is called
during nvgpu remove sequence.
Added following helper functions in ltc.h:
u32 nvgpu_ltc_get_ltc_count(struct gk20a *g);
u32 nvgpu_ltc_get_slices_per_ltc(struct gk20a *g);
u32 nvgpu_ltc_get_cacheline_size(struct gk20a *g);
Removed redudnant ltc.init_fs_state call from vgpu init
sequence since it is getting called from nvgpu_init_ltc_support.
NVGPU-2044
Change-Id: I3c256dc3866f894c38715aa2609e85bd2e5cfe5a
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073417
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following.
1. Remove unused functions from volt_pmu.c.
2. Append public functions with nvgpu.
3. Remove GP106 functions and rename TU104 to generic functions.
4. Rename volt struct from gpu_ops.
5. Remove the unused volt.h header file.
6. Make local functions as static and put in order.
7. Remove unused inclusion on header files.
8. After 4, generic functions can be called directly instead of g->ops.
Jira NVGPU-1956
Change-Id: Icaea0ca817d37cccfc09241baa2f047ec2688169
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2076535
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved cbc related code and data from gr to cbc unit.
Ltc and cbc related data is moved from gr header:
1. Ltc related data moved from gr_gk20a -> gk20a and it
will be moved eventually to ltc unit:
u32 slices_per_ltc;
u32 cacheline_size;
2. cbc data moved from gr_gk20a -> nvgpu_cbc
u32 compbit_backing_size;
u32 comptags_per_cacheline;
u32 gobs_per_comptagline_per_slice;
u32 max_comptag_lines;
struct gk20a_comptag_allocator comp_tags;
struct compbit_store_desc compbit_store;
3. Following config data moved gr_gk20a -> gk20a
u32 comptag_mem_deduct;
u32 max_comptag_mem;
These are part of initial config which should be available
during nvgpu_probe. So it can't be moved to nvgpu_cbc.
Modified code to use above updated data structures.
Removed cbc init sequence from gr and added in
common cbc unit. This sequence is getting called
from common nvgpu init code.
JIRA NVGPU-2896
JIRA NVGPU-2897
Change-Id: I1a1b1e73b75396d61de684f413ebc551a1202a57
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033286
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below HALs to get max FBPs, max LTC per FBP, max LTS pet LTC values are
right now defined by GR unit.
g->ops.gr.get_max_fbps_count()
g->ops.gr.get_max_ltc_per_fbp()
g->ops.gr.get_max_lts_per_ltc()
These HALs only read registers from hw_top_*.h h/w unit, and as such
belong to TOP unit. Move them appropriately as below
g->ops.top.get_max_fbps_count()
g->ops.top.get_max_ltc_per_fbp()
g->ops.top.get_max_lts_per_ltc()
Remove hw_top_*.h h/w header include from gr_gk20a.c and gr_gm20b.c
Jira NVGPU-2894
Change-Id: I995d9f56edb65c9de98d2d15d34ecb72920a65c6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030672
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved zbc related files to common/gr/zbc location.
struct nvgpu_gr_zbc created for zbc variables.
common zbc functions are moved to gr_zbc.c file.
All zbc hal functions are moved with corresponding chip specific
filename.
JIRA NVGPU-1882
Change-Id: I1bdaa2d9416e6e77ab305f117647dc070438ee86
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2019760
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are done in this patch.
1) gk20a_fifo_get_engine_info() is moved to common/fifo/engine.c
and is renamed to gk20a_fifo_get_active_engine_info() to reflect
accurately the purpose of the function.
2) move the definition of enum fifo_engine to <nvgpu/engines.h> and
add the prefix NVGPU_
3) move the following functions related to engines in fifo_gk20a.c to
common/fifo/engines.c and replace their signature by adding the prefix
nvgpu_engine and removing gk20a_fifo.
gk20a_fifo_get_active_engine_info
gk20a_fifo_engine_enum_from_type
gk20a_fifo_get_engine_ids
gk20a_fifo_is_valid_engine_id
gk20a_fifo_get_gr_engine_id
gk20a_fifo_act_eng_interrupt_mask
gk20a_fifo_engine_interrupt_mask
gk20a_fifo_get_all_ce_engine_reset_mask
Jira NVGPU-1315
Change-Id: I63d9dcd905a0bebcc9a4c65776cf6ec7a0837acf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011298
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We get gpc_mask by calling GR HAL g->ops.gr.get_gpc_mask()
But gpc_mask should be logically owned by gr/config unit
Hence add new gpc_mask field to nvgpu_gr_config
Initialize it in nvgpu_gr_config_init() by calling a new HAL
g->ops.gr.config.get_gpc_mask() if available
If HAL is not defined we just initialize it based on gpc_count
Expose new API nvgpu_gr_config_get_gpc_mask() to get gpc_mask
and use this API now
Remove gr_gm20b_get_gpc_mask() and HAL g->ops.gr.get_gpc_mask()
Update GV100 and TU104 chip HALs to remove old and add new HAL
Add gpc_mask to struct tegra_vgpu_constants_params to support this
on vGPU. Also get gpc_mask from vGPU private data in
vgpu_gr_init_gr_config()
Jira NVGPU-1879
Change-Id: Ibdc89ea51df944dc7085920509e3536a5721efc0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2016084
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
