Sagar Kamble eacaf8cec2 gpu: nvgpu: register pm_qos min & max frequency notifiers ...

nvpmodel updates the devfreq frequency limits as per power requirements
for specific chip. Clock arbiter ignored these limits and set clock
to maximum supported frequency which may lead to leaking power and
over heating.

Add support to get the devfreq limits by registering PM_QOS notifiers.
Note that with this patch we enable CONFIG_GK20A_PM_QOS when PM_DEVFREQ
is enabled. So it will be enabled for all supported kernels (4.9, 4.14
kernels continue to support this. For 5.10+ kernels notifiers added in
this patch will be used. Thermal framework related notifiers for kernels
after 4.14 will not be registered as those use downstream interfaces
that are not available.)

We maintain devfreq min/max limits in the scale profile and update those
in the notifier calls. We use these limits to clamp the frequency in the
clock arbiter.

Bug 3852824

Change-Id: I734a9fb080fee1a91e9b5da071b662dbd9a18682
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2822686
Tested-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>

2022-12-09 01:21:15 -08:00

3.0 KiB

Raw Blame History

View Raw