Camera fsync signal Driver provides following features.
- Configures and runs TSC generator to provide fsync signal to the
camera module
- FSYNC signal is programmed as specified in DT for freq and offset
- Start time of fsync signal can be specified or default
value can be used
- Default value used will be 10ms in future
- If start time is provided, value must be provided in TSC ticks unit
- Read DT, if tsc-gen-groups are specified, init & expose node for
each group
- Each generator in group is configured
- IOCTL interface is exposed to accept start time and start the generator
- Sanity check is done to ensure, no generator is part of multiple groups
- Backward compatibility is maintained
JIRA CAMERASW-11902
Bug 3799488
Change-Id: I4f278eb95b8f85edb2d5e7664c9f2dd694437263
Signed-off-by: Mohit Ingale <mohiti@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2898373
Reviewed-by: Bhushan Rayrikar <brayrikar@nvidia.com>
Reviewed-by: Frank Chen <frankc@nvidia.com>
Reviewed-by: Shiva Dubey <sdubey@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Add support for configurable interrupt timers and event notification
queues to SIPL Device Block to mirror the CDAC (QNX) pulse channel
interface.
The CDI_MGR_IOCTL_INTR_CONFIG IOCTL is added to set the timeout
duration at initialization, and existing GPIO interrupt code is
refactored.
Also removes the GPIO index limitation to the range of [0,31] by
returning the complete indices one at a time instead of a bit flag.
Jira CAMERASW-11100
Jira CAMERASW-11385
Jira CAMERASW-9366
Bug 3902416
Bug 3792904
Signed-off-by: Vincent Chung <vincentc@nvidia.com>
Change-Id: I62b6c0bd8be18922ab1fe5d40485a69274f2a18e
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2893327
Reviewed-by: Semi Malinen <smalinen@nvidia.com>
Reviewed-by: Shiva Dubey <sdubey@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
The sensor kernel tests module is a simple test runner whose
responsibility is to dispatch tests and communicate with the
companion userspace binary over Generic Netlink sockets. Tests
may choose to register themselves with this module where they
then can be executed from userspace.
The sensor DT test asserts DT compliance of a given sensor node
with respect to a given TVCF version
A small set of logging utilities have been added to allow
tests the ability to log their results to the kernel log
or to some other handle (typically injected via the sensor
kernel tests module) through a common interface.
Bug 3583587
Change-Id: I22acf9c90fc82fbbdad8ba271dcdbbd6a5898eda
Signed-off-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2857293
Reviewed-by: Frank Chen <frankc@nvidia.com>
Reviewed-by: Semi Malinen <smalinen@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit 03c835f498b5 ("i2c: Switch .probe() to not take an
id parameter") removes the 'id' argument from the I2C probe callback.
Update the drivers which define an I2C probe callback function to fix
building them for Linux v6.3.
Bug 4014315
Change-Id: I1c9924e3b1b6413d385f7d0daa9ef181dadfabe4
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2870268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On SIPL stack, VI engine status memory which
is allocated by SIPL span across multiple memory
pages. IOVA calculations in KMD as per pinned
pages did not taken to account the multiple pages and
calculated IOVA based on first page base address.
This lead to VI falcon access the passed incorrect
iova address which caused Kernel OOPS at random places.
To fix this, calculate the IOVA based on adjusting
offset with respect to right page by traversing the
scatterlist. For older kernel versions(4.9) being used
in some android packages, the existing IOVA mappping is
kept as it is, as it doesn't support scatterlist.
Bug 3770879
Change-Id: I27d6850aaecbb1e095e836adee041f3f4747e2b7
Signed-off-by: Ajith Kumar <ajithk@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2800018
(cherry picked from commit d27f901f5e21380441f3d1afd19f1fdbd160b06f)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvidia/+/2799843
(cherry picked from commit 2856d6a5aa5a56f0a1c543ad6c2ba8373282c2c5)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2864345
Reviewed-by: Vincent Chung <vincentc@nvidia.com>
Reviewed-by: Bhushan Rayrikar <brayrikar@nvidia.com>
Reviewed-by: Igor Mitsyanko <imitsyanko@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Frank Chen <frankc@nvidia.com>
Reviewed-by: Shiva Dubey <sdubey@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Tested-by: Frank Chen <frankc@nvidia.com>
When kernel command line debugfs=off is specified instead of
disabling CONFIG_DEBUG_FS in defconfig to disable Debug-FS,
debugfs functions like debugfs_create_dir will fail.
Use function debugfs_initialized() to check if debugfs
functionality is enabled before calling any debugfs functions.
This allows us to by-pass debugfs initialization if debugfs
is not enabled.
Bug 3752450
Change-Id: I17390c2d9928638d940454c2ea1b3abf00ed4264
Signed-off-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2855128
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux kernel commit ff62b8e6588f ("driver core: make struct
class.devnode() take a const *") updated the 'devnode' function pointer
under the class structure to take a const device struct. This breaks
building the Tegra CDI MDR driver with Linux v6.2. Make the
necessary changes to the CDI MGR driver to fix the build breakage.
Also update CDI MGR GPIO code since devm_fwnode_get_gpiod_from_child()
is deprecated in Linux v6.2. Switch to use devm_fwnode_gpiod_get_index()
for Linux v6.2.
Bug 3936429
Change-Id: I327ebe1fa42d89a63e0b483d3ce1ff1b8b168532
Signed-off-by: Frank Chen <frankc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2843858
Reviewed-by: Ian Kaszubski <ikaszubski@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux kernel commit ff62b8e6588f ("driver core: make struct
class.devnode() take a const *") updated the 'devnode' function pointer
under the class structure to take a const device struct. This breaks
building the Tegra CDI MDR driver with Linux v6.2. Make the
necessary changes to the CDI MGR driver to fix the build breakage.
Bug 3936429
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Change-Id: I4f2b75afa05b9ab5f4058b24f4022b0f0a8e6235
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2841045
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Building the Tegra camera drivers with Linux v5.16+ kernels fail because
the driver does not use the correct kernel version for handling various
API changes in upstream. Update ther kernel version appropriately so
that the camera drivers can build with Linux v5.16+ kernels.
Change-Id: I4c110d12f554fd4aa757a1aa9a42a81be5a87ae6
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2831219
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Upstream Linux commit ed5c2f5fd10d ("i2c: Make remove callback
return void") in Linux v6.1, updates the i2c remove callback to
prototype to return void instead of int. This is causes the build for
CDI and ISC drivers to fail for Linux v6.1. Update these drivers to
fix the build for Linux v6.1.
Bug 3820317
Bug 3835208
Change-Id: Id71db032896c437017cf2ffa3216353b8472cd6d
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2825008
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
kernel drivers can be built as built-in (=y) or module
(=m). The old ways of checking a driver is enabled or
not is to use "#if define(CONFIG_XXX)" for built-in and
"#if defined(CONFIG_xxx_MODULE)" for module.
Switch to the new IS_ENABLED() macro which can check
a driver is configured as built-in or module.
Jira CAMERASW-10141
Change-Id: I9b7e3e911a587da19ca56cdc5ef610d9b4c52850
Signed-off-by: Frank Chen <frankc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nv-oot/+/2828089
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Igor Mitsyanko <imitsyanko@nvidia.com>
Reviewed-by: Ankur Pawar <ankurp@nvidia.com>
Reviewed-by: Matti Ryttylainen <mryttylainen@nvidia.com>
Reviewed-by: Shiva Dubey <sdubey@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
