-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt functions from
pmu_pstate.c to volt.c as it belongs there and also move the
arbitor specific functions under CLK_ARB as they will be removed
from safety build.
This patch does the following
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
*Replace pmu.h with nvgpu_mem.h in boardobj.h
*Rename obj_volt to nvgpu_pmu_volt
NVGPU-4491
NVGPU-4492
Change-Id: I9abc96f695fce41893311982a80dc3656aaa64d6
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2282361
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch removes dependency between pmu.clk and hal.clk.
Below is the implementation.
*Init the clk domains inside pmu.clk unit.
*Set this in a member variable and send it to hal.clk unit
*Use this to determine the valid clock domains and read the
monitor registers for each valid domains.
*Return the domain with error code.
*With this all the clk domain data is removed from hal.clk and
only pmu.clk uses it as it owns it.
JIRA NVGPU-4491
Change-Id: Ie57b2472cfaacfd2ce43ac7f95702bd95fb8bbaa
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2272416
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_change_seq_inf.h and moved all
change_seq interface structs and MACROs
-Moved nvgpu_clk_set_req_fll_clk_ps35 from clk unit
to change_seq unit
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I04ab32cbc9a1fc827f3360a8ea0f367019981823
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2266051
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_pstate_inf.h and moved all
pstate interface structs and MACROs.
-Created nvgpu_perf_pstate_get_lpwr_index for getting
lpwr index
-Created nvgpu_clk_domain_get_from_index for getting
clk_domain from index
-Removed pstate_get_status code which is not needed
for tu10a profile
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I516816a1d92a60a91ea479cb9c334d332d3d7a89
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2264716
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_vfe_inf.h and moved all VFE
interface structs and MACROs into this header
-Created nvgpu_clk_fll_get_fmargin_idx to get
freq margin index
-Created nvgpu_vfe_var_get_s_param to read s_param
-Removed MACROs and header includes which are
not needed
NVGPU-4448
Change-Id: I89f946d555bcbc7823665d2a5a761049f7a5e963
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2260150
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt unit from perf to pmu
as it belongs there and also move the arbitor specific functions under
CLK_ARB as they will be removed from safety build.
This patch does the following
*Move volt struct from perf to pmu
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
NVGPU-4491
NVGPU-4492
Change-Id: I7180cd12bbf91cc4d2e79b6e2d71c16e494c8ff0
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2268215
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Typically, the PMU init thread will finish up long
before the golden context image has been initialized,
which means that ELPG hasn't truly been enabled at that
point.
Create a new function, nvgpu_pmu_reenable_pg(), which
checks if elpg had been enabled (non-zero refcnt), and
if so, disables then re-enables it.
Call this function from nvgpu_gr_obj_ctx_alloc() after
the golden context image has been initialized to ensure
that elpg is truly enabled.
Bug 200543218
Change-Id: I0e7c4f64434c5e356829581950edce61cc88882a
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2245768
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently for every +/-5 degC change in
temperature, PMU internally evaluate VF curve on
temp change and will send VFE callback to NVGPU for
initiating change seq to program voltage and frequency.
This is the only callback we receive on temp change
which we handle in perf unit, and we don't have any
other temp events raised by PMU.
So, deleting the therm event handler.
NVGPU-4360
Change-Id: I3c7279dcf691135c178b6a05766403a935bc7e73
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2241488
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support in nvgpu to parse and get the freq cap from DT.
The patch does below
Parse the DT and gets the freq cap value during probe.
During clk_arb init compare this with P0.Max and takes the lowest.
Send change_seq with the new value and set dgpu freq.
Use the lowest for "get points","get default","set VF".
Bug 200556366
Change-Id: Ie10243f9bf83cb5ae07ebcc4cdc8efaffa56c309
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204644
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the change_seq of latest ucode, the boot pstate
index was taken from pstate board_objs instead of the
value from change_input. This forces the need of
introducing boot index in pstate board_obj structure.
The index is the performance table entry index of
P0 pstate.
The ucode change is described in P4CL #27304645
NVGPU-4081
Change-Id: Id3f4a1da7015cd6b7efe555529f1fa13c9f3b391
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202363
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently nvgpu reads the temperature by reading the
NV_THERM_I2CS_SENSOR_00 register. Below are the issues
with current approach
1) NV_THERM_I2CS_SENSOR_00 doesn't support
fractional precision which is POR.
2) It doesn't support negative temperatures which
is required for Auto.
3) It doesn't take into account the right POR
sensor in VFE VBIOS tables.
From therm channel get status interface we can read the
current temperature from PMU.
NVBUG - 200549047
Change-Id: I2fb21926208876f3d3bebe3f2dee08edafedbc7d
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196224
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove the second parameter for the pmu_early_init() and pmu_init()
functions so they only require the gk20a object. The g->pmu was always
passed for this parameter. And this makes the API signature match the
other init functions in the driver.
JIRA NVGPU-3980
Change-Id: Iae9361a5f14bc5c1d02f4ddb6583f30b71b22d59
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202968
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
