Subcontext PDBs and valid mask in the instance blocks of the channels
in various subcontexts has to be updated when new subcontext is
created or a subcontext is removed.
Replayable fault state is cached in the channel structure. Replayable
fault state for subcontext is set based on first channel's bind
parameter. It was earlier programmed in function channel_setup_ramfc.
init_inst_block_core is updated to setup TSG level pdb map and mask.
Added new hal gv11b_channel_bind to enable the subcontext on channel
bind.
Bug 3677982
Change-Id: I58156c5b3ab6309b6a4b8e72b0e798d6a39c1bee
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2719994
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Background: In case of a deferred suspend implemented by gk20a_idle,
the device waits for a delay before suspending and invoking
power gating callbacks. This helps minimize resume latency for any
resume calls(gk20a_busy) that occur before the delay.
Now, some APIs spread across the driver requires that if the device
is powered on, then they can proceed with register writes, but if its
powered off, then it must return. Examples of such APIs include
l2_flush, fb_flush and even nvs_thread. We have relied on
some hacks to ensure the device is kept powered on to prevent any such
delayed suspension to proceed. However, this still raced for some calls
like ioctl l2_flush, so gk20a_busy() was added (Refer to commit Id
dd341e7ecbaf65843cb8059f9d57a8be58952f63)
Upstream linux kernel has introduced the API pm_runtime_get_if_active
specifically to handle the corner case for locking the state during the
event of a deferred suspend.
According to the Linux kernel docs, invoking the API with
ign_usage_count parameter set to true, prevents an incoming suspend
if it has not already suspended.
With this, there is no longer a need to check whether
nvgpu_is_powered_off(). Changed the behavior of gk20a_busy_noresume()
to return bool. It returns true, iff it managed to prevent
an imminent suspend, else returns false. For cases where
PM runtime is disabled, the code follows the existing implementation.
Added missing gk20a_busy_noresume() calls to tlb_invalidate.
Also, moved gk20a_pm_deinit to after nvgpu_quiesce() in
the module removal path. This is done to prevent regs access
after registers are locked out at the end of nvgpu_quiesce. This
can happen as some free function calls post quiesce might still
have l2_flush, fb_flush deep inside their stack, hence invoke
gk20a_pm_deinit to disable pm_runtime immediately after quiesce.
Kept the legacy implementation same for VGPU and
older kernels
Jira NVGPU-8487
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I972f9afe577b670c44fc09e3177a5ce8a44ca338
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2715654
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Fixed following Coverity Defects:
ioctl_as.c : Bad bit shift operation
mc_tu104.c : Bad bit shift operation
vm.c : Bad bit shift operation
vm_remap.c : Bad bit shift operation
A new linux header file for ilog2 is created.
The files which used the old ilog2 function
have been changed to use the new nvgpu_ilog2
function.
CID 9847922
CID 9869507
CID 9859508
CID 10112314
CID 10127813
CID 10127899
CID 10128004
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: Ia201eea7cc426c3d6581e1e5ae3b882dbab3b490
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2700994
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In Drive 6.0, the error reporting is supported only for orin (ga10b)
in dev-main. For this purpose, this patch does the following:
- Removes the redundant reporting of following IDs from gv11b:
- GPU_HOST_PFIFO_SCHED_ERROR
- GPU_HOST_PFIFO_CTXSW_TIMEOUT_ERROR
- GPU_HOST_PBDMA_HCE_ERROR
- GPU_MMU_L1TLB_SA_DATA_ECC_UNCORRECTED
- GPU_MMU_L1TLB_FA_DATA_ECC_UNCORRECTED
- GPU_LTC_CACHE_DSTG_ECC_CORRECTED
- GPU_LTC_CACHE_TSTG_ECC_UNCORRECTED
- Migrates the reporting of following IDs from gv11b to ga10b:
- GPU_SM_L1_TAG_ECC_CORRECTED
- GPU_SM_L1_TAG_ECC_UNCORRECTED
- GPU_SM_CBU_ECC_UNCORRECTED
- GPU_SM_LRF_ECC_UNCORRECTED
- GPU_SM_L1_DATA_ECC_UNCORRECTED
- GPU_SM_ICACHE_L1_DATA_ECC_UNCORRECTED
- GPU_SM_ICACHE_L0_PREDECODE_ECC_UNCORRECTED
- GPU_SM_L1_TAG_MISS_FIFO_ECC_UNCORRECTED
- GPU_SM_L1_TAG_S2R_PIXPRF_ECC_UNCORRECTED
- Removes the unused ID that doesn't have any HSI related to it:
- GPU_HOST_PBDMA_PREEMPT_ERROR
In addition to the above, this patch does the following:
- Updates error IDs related to page fault error.
- Updates look-up table to remove unused error IDs.
JIRA NVGPU-8094
Bug 200729736
Change-Id: Ifea76d38ba609c894560e61ff5a6e406290f919e
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2685249
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce debug logs printed when gpu_dbg_info or gpu_dbg_fn is set.
- Add gpu_dbg_verbose flag for more verbose debug prints. Update prints
in to ga10b_gr_init_wait_idle(), gm20b_gr_init_wait_fe_idle(),
gv11b_gr_init_write_bundle_veid_state() and
gv11b_gr_init_load_sw_veid_bundle().
- Add gpu_dbg_hwpm flag for hwpm specific debug prints. Update print in
nvgpu_gr_hwpm_map_create().
- Add gpu_dbg_mm for MM specific debug prints. Update prints in
gm20b_fb_tlb_invalidate(), gk20a_mm_fb_flush(),
gk20a_mm_l2_invalidate_locked(), gk20a_mm_l2_flush() and
gv11b_mm_l2_flush().
- Remove gpu_dbg_fn mask print in gr_ga10b_create_priv_addr_table(),
gr_gk20a_get_pm_ctx_buffer_offsets(), gr_gv11b_decode_priv_addr() and
gr_gv11b_create_priv_addr_table().
Jira NVGPU-7183
Change-Id: I9842d567047cb95a42e23b5907ae324214eed606
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602797
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
gv11b_mm_mmu_fault_handle_mmu_fault_refch() right now checks/sets
mmu_nack_handled flag for MMU faults from all clients (i.e. GPC/HUB).
Handling of MMU nack in MMU fault handling path is only needed if MMU
nack exception is triggered by SM in GPC. Hence set and check this flag
only if source client is GPC.
In certain cases it is possible that CE engine triggers back to back
MMU faults on same channel. When this happens, and because of above
incorrect mmu_nack_handled flag handling, mmu_nack_handled flag is set
while handling second MMU fault from CE.
And because of this gv11b_mm_mmu_fault_handle_mmu_fault_refch() function
could end up dropping extra channel refcounts and trigger access after
free scenarios on that channel.
Bug 3315942
Change-Id: I28d8311edf34a041364dddedb5fc3a5b83132f85
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2540497
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The function gk20a_mm_l2_flush incorrectly returns an error value
when it skips l2_flush when hardware is powered off.
This causes the following prints to occur even when the behavior is expected.
gv11b_mm_l2_flush:43 [ERR] gk20a_mm_l2_flush failed
nvgpu_gmmu_unmap_locked:1043 [ERR] gk20a_mm_l2_flush[1] failed
The above errors occur from the following paths
1) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_pmu_remove_support -> nvgpu_pmu_pg_deinit ->
nvgpu_dma_unmap_free
2) gk20a_remove -> gk20a_free_cb -> gk20a_remove_support ->
nvgpu_remove_mm_support -> gv11b_mm_mmu_fault_info_mem_destroy ->
nvgpu_dma_unmap_free
Since, these do not belong in the Poweron/Poweroff path, its okay to
skip flushing them when the hardware has powered off.
Fixed the userspace tests by allocating g->mm.bar1.vm to prevent NULL access
in gv11b_mm_l2_flush->tlb_invalidate.
Jira LS-77
Change-Id: I3ca71f5118daf4b2eeacfe5bf83d94317f29d446
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2523751
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Directive 4.5 states that identifiers in the same
name space with overlapping visibility should be typographically
unambiguous.
In both the nvgpu_locate_pte_last_level() and gp10b_get_pde0_pgz()
routines this violation is raised because a variable used as
a for-loop index ('i') is ambiguous with a parameter that points
to a struct gk20a_mmu_level ('l').
To fix these violations the loop index 'i' is renamed to 'idx'.
Jira NVGPU-3178
Change-Id: I2cec904201075b48ab6ccfbd0ff6d7e9dcac2867
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2271456
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gv11b_mm_mmu_fault_handle_mmu_fault_common was calling
gv11b_mm_mmu_fault_handle_mmu_fault_ce for any mmu_engine_id
greater than gmmu_fault_mmu_eng_id_ce0_v().
This include GR engine on gv11b.
Check the range of mmu_fault_id for CEs instead, before
calling gv11b_mm_mmu_fault_handle_mmu_fault_ce.
Jira NVGPU-4511
Change-Id: I28a78872918dc97e0878ef4c116059eaf5d7fa7b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2264975
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved mmu replayable fault related code under CONFIG_NVGPU_REPLAYABLE_FAULT
switch, so that it will be compiled out for safety build.
Following hals and their related code also moved under
CONFIG_NVGPU_REPLAYABLE_FAULT switch:
void (*handle_replayable_fault)(struct gk20a *g);
int (*mmu_invalidate_replay)(struct gk20a *g, u32 invalidate_replay_val);
JIRA NVGPU-4302
Change-Id: I191ee0c181b276a04bc1531488862380af81a5c9
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2227176
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For MMU and PBDMA faults, error notifier needs to be set
before entering SW quiesce. Otherwise it ends up with
default NVGPU_ERR_NOTIFIER_FIFO_ERROR_IDLE_TIMEOUT.
Added nvgpu_rc_mmu_fault to:
- call g->ops.fifo.recover when recovery is enabled
- set MMU error when recovery is disabled
Updated nvgpu_rc_pbdma_fault to set PBDMA error when
recovery is disabled as well.
Wait for deferred interrupts to complete before actually
entering SW quiesce state, to make sure error notifier has
been set.
Jira NVGPU-4127
Change-Id: Ia84c723e021e397391c6c609d4bb96c06afdcc47
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210909
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs were not enabled before nvgpu_finalize_poweron, so debugging early
init issues such as MMU fault, invalid PRIV ring or bus access etc.
triggered during nvgpu power-on was cumbersome. Hence, Enable the
IRQs before nvgpu_finalize_poweron is called.
In HUB (MMU fault) ISR, MMU fault handling is only limited to snapped
in priv reg in case of fault during nvgpu power-on.
In HUB (MMU fault) ISR, access to fault buffers is synchronized as
nvgpu driver reads the fault buffer registers before proceeding
with fault handling. However, additional MMU fault handling
needs to be synchronized with GR/FIFO/quiesce/recovery setup
through nvgpu power-on state.
JIRA NVGPU-1592
Change-Id: I8a5f2fcd79cb7ad8e215359e7a9fad50bfd46d67
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203861
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
