based on the config setting and fuse secure no non secure boot is done
Change-Id: I5937ba945c5a3a86f72e0f2a9078fcde01977137
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/487684
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Added direct read and write debugfs access to GM20b GPCPLL registers.
Change-Id: I203621906ee094991eecd5c18fd5b6c70b20a4c1
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/487314
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bo Yan <byan@nvidia.com>
In gk20a_do_idle(), to get pointer to platform_device of gk20a,
we use bus_find_device_by_name() and pass "gk20a.0" to it
But this hard coding fails on gm20b since GPU device name
there is "gpu"
Hence to fix this add a static pointer handle "gk20a_handle"
to struct gk20a in gk20a.c
Now we can access this global pointer inside do_idle()
to get gk20a pointer and from that we can get pointer to
platform_device
Change-Id: I1a65588e34ad36efed0fa587bb365f0ee81e253d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/486887
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Currently cde reinitialises the context each time before submitting
work to the channel. This was done to ensure that we are able to
get clean context for the shader during development phase. However,
as the shader has been tested to work w/o reinitialising the context,
we can remove the reinitialisation to gain better performance.
Change-Id: If0b0e03133058528da943faaeb72ca500d3ddb14
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/486673
Reviewed-by: Jussi Rasanen <jrasanen@nvidia.com>
Tested-by: Jussi Rasanen <jrasanen@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Lauri Peltonen <lpeltonen@nvidia.com>
Do not force GM20b GPCPLL post divider to 1:2 settings before switching
to bypass clock if PLL output frequency is increased as a result. Move
this step under bypass. However, this step is still needed in case when
PLL can be configured without switch to bypass.
Bug 1450787
Change-Id: Iab81b0e5a71f44f738a64e15b05df41fdbd61ebe
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/456505
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Tested-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
The code took reference to gk20a by using gk20a_busy_noresume(). This
function takes pm runtime reference only to the GPU, however, the code
dropped the reference by calling gk20a_idle() which also drops the
reference to the platform dependencies (host1x).
This patch modifies gm20b_mm_mmu_vpr_info_fetch_wait() to drop only
the GPU reference.
Change-Id: Ied59381fa302452356768ed59e8ad9af18284e3d
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/482721
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
The nvgpu driver now supports using the Tegra graphics virtualization
interfaces to support gk20a in a virtualized environment.
Bug 1509608
Change-Id: I6ede15ee7bf0b0ad8a13e8eb5f557c3516ead676
Signed-off-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Reviewed-on: http://git-master/r/440122
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Current implementation is based on config GK20A_PHYS_PAGE_TABLES
to have APIs to create/free/map/unmap phys pages
Remove this config based implementaion and move the APIs so that
they are called at runtime based on tegra_platform_is_linsim()
In generic APIs, we first check if platform is linsim and if it
is then we forward the call to phys page specific APIs
Change-Id: I23eb6fa6a46b804441f18fc37e2390d938d62515
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/488843
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Simulation does not model rails, so do not try to control them.
Change-Id: I52ec12e7865e18764274dd9ce7a2fbd196b6b9d1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/482181
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Thomas Cherry <tcherry@nvidia.com>
Tested-by: Thomas Cherry <tcherry@nvidia.com>
Disabled GPCPLL SYNC mode after GM20b is switched to bypass clock when
powering down GPU.
Bug 1450787
Change-Id: Ifaec2c562e51c0ae1328b7505faafd19607a77f2
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/456504
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bo Yan <byan@nvidia.com>
Modify the 3d.emc policy to use a formula based on bandwidth and
utilization instead of the current sku-dependent policy.
Bug 1364894
Change-Id: Id97f765a48f0aa9f5ebeb0c82bccb22db474a1ae
Signed-off-by: Samuel Russell <samuelr@nvidia.com>
Reviewed-on: http://git-master/r/453586
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
PBDMA timeout can cause stale data in FIFO. Default value equals 1ms.
Increase it to max.
Bug 1537636
Change-Id: I1c6c6b10abaece3a64b77b9b3ef77ff726ff67cf
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/457047
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Allen Chang <allchang@nvidia.com>
Tested-by: Allen Chang <allchang@nvidia.com>
Gk20a unmaps the addresses binding to dummy page to clear sparse.
On Gm20b, we need to free the allocated page table entry for sparse
memory.
Bug 1538384
Change-Id: Ie2409ab016c29f42c5f7d97dd7287b093b47f9df
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/448645
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add below ioctl to force channel reset/recovery.
NVHOST_IOCTL_CHANNEL_FORCE_RESET
This recovery/reset is initiated by triggering
mmu fault on channel so as to force the channel
out (as oppose to waiting until channel is
preempted)
Bug 200027958
Change-Id: Idd3c10ef5fa691d746e34a8b890bd79aca815a20
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/456084
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Through this sysfs entry, the register space becomes accessible.
This is be accessible root-only.
Bug 1523403
Change-Id: Ia46f130a0cfd8324c5b675d19e7cbfba9dcb17ca
Signed-off-by: sujeet baranwal <sbaranwal@nvidia.com>
Reviewed-on: http://git-master/r/454198
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
This patch adds a parameter to communicate the compression bit
backing store address we write to the hardware.
Change-Id: Ibc0e3d8304e893ddf15b4e03b405c7d85a73e95b
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/454510
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
This patch adds support to pass shader parameters through debugfs.
These parameters are required to change the shader behaviour without
reloading the firmware image.
Change-Id: Ib0ff773d9425aa9fcc58655717cccafcfbaf7bfd
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/453462
Reviewed-by: Jussi Rasanen <jrasanen@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Jussi Rasanen <jrasanen@nvidia.com>
Calculation for comptag backing store must use number of LTCs instead
of number of FBPs.
Change-Id: If0aa636e09a3d24459987e626fe53bb7c96f1b15
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/453809
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
We have hardcoded compbit backing store to cover 1MB of memory in
ASIM. Remove that hard coding and use the total memory size instead.
Change-Id: Ibb5c6ae88015960fa360ddd5f7bba05949d4da7b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/450313
Newer netlist does not require image size queries to boot. Save 2ms
from GPU boot time by skipping it if we know the sizes.
Bug 1435870
Change-Id: Ie1b13c8a6e420adf06e635bde8b469385e1d5c60
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/419873
Workaround for GPU hang if boost turns GPU on before it is
initialized.
Bug 1435870
Change-Id: I07d0617049612344ca7c494da8cb8d75789984e5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/453375
"isr_enable_lock" was used to protect pmu's isr_enabled flag
and pmu enable/disable calls
Instead of this extra lock, we can reuse "isr_mutex" for this
purpose
Bug 200014542
Bug 200014887
Change-Id: Ifbb7d6108effc132266a20517820e470d52a7110
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/453348
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add below ioctls for channels
1. NVHOST_IOCTL_CHANNEL_ENABLE
To enable the channel
2. NVHOST_IOCTL_CHANNEL_DISABLE
To disable the channel
3. NVHOST_IOCTL_CHANNEL_PREEMPT
To preempt the channel
(Not supported for a channel in TSG)
Bug 1514064
Change-Id: Ie9315f9742bb27efb22f993799c51a1ecda91756
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/449229
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
This patch fixes a refcounting issue in semaphore handling.
Change-Id: I03327c60ed6923a90663f0b845566e81af4b94d4
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/453056
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In runlist we first write channel count in TSG entry and then
follow those many channel entries
If no. of channel entries does not match to count then it is
considered as error
To detect this, add a counter while adding channel entries and
give warning if channel count does not match with this counter
bug 1470692
Change-Id: I4bbfd9b696fbfafa25dffb27979373f057a7f35a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/449228
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Currently we clear the runlist and re-create it in
scheduled work during fifo recovery process
But we can post-pone this runlist re-generation for
later time i.e. when channel is closed
Hence, remove runlist locks and re-generation from
handle_mmu_fault() methods. Instead of that, disable
gr fifo access at start of recovery and re-enable
it at end of recovery process.
Also, delete scheduled work to re-create runlist.
Re-enable EPLG and fifo access in
finish_mmu_fault_handling() itself.
bug 1470692
Change-Id: I705a6a5236734c7207a01d9a9fa9eca22bdbe7eb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/449225
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Modify TSG's channel list as "ch_list" for all channels
instead of "ch_runnable_list" for only runnable list
We can traverse this list and check runnable status of
channel in active_channels to get runnable channels
Remove below APIs as they are no longer required :
gk20a_bind_runnable_channel_to_tsg()
gk20a_unbind_channel_from_tsg()
While closing the channel, call gk20a_tsg_unbind_channel()
to unbind the channel from TSG
bug 1470692
Change-Id: I0178fa74b3e8bb4e5c0b3e3b2b2f031491761ba7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/449227
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reading the load value may increase CPU power consumption
temprorarily. In most cases we are ok with a value that
was read a moment earlier.
This patch introduces a software shadow for gpu load. The shadow
is updated before starting scaling and all scaling code paths use
the sw shadow.
Change-Id: I53d2ccb8e7f83147f411a14d3104d890dd9af9a3
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-on: http://git-master/r/453347
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
1. Register tegra-throttle cooling device as a
platform driver.
2. Obtain all the platform data (throtlle table
info) for all instances of blanced-throtlled cdev
from device tree and register them.
Change-Id: Ie92685eea3eb5cb18068b195adc9ab5f83762399
Signed-off-by: Arun Kumar Swain <arswain@nvidia.com>
Reviewed-on: http://git-master/r/449104
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Tested-by: Diwakar Tundlam <dtundlam@nvidia.com>
