Introduce nvgpu_gmmu_map_partial() to map a specific size of a buffer
represented by nvgpu_mem, or what nvgpu_gmmu_map() used to do. Delete
the size parameter from nvgpu_gmmu_map() such that it now maps the
entire buffer. The separate size parameter is a historical artifact from
when nvgpu_mem did not exist yet; the typical use is to map the entire
buffer.
Mapping at a certain address with nvgpu_gmmu_map_fixed() still takes the
size parameter.
The returned address still has to be stored somewhere, typically to
mem.gpu_va by the caller so that the matching unmap variant finds the
right address.
Change-Id: I7d67a0b15d741c6bcee1aecff1678e3216cc28d2
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601788
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce nvgpu_gmmu_unmap_addr() to unmap a nvgpu_mem that was mapped
at some other address than mem.gpu_va, which can be the case for buffers
that are shared across different address spaces. Delete the address
parameter from nvgpu_gmmu_unmap(), as the common case is to store the
address to mem.gpu_va when mapping the buffer.
Modify some instances of consecutive unmap + free calls to call just
nvgpu_dma_unmap_free().
Change-Id: Iecd7c9aa41d04e9f48e055f6bc0c9227cd759c69
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601787
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GFxP preemption for graphics contexts is not supported in safety.
But the support was enabled along with CONFIG_NVGPU_GRAPHICS since GFxP
preemption was protected under same config.
Add a separate config CONFIG_NVGPU_GFXP to protect all GFxP specific
code, enum values, and HALs.
Disable the config in safety profile.
Jira NVGPU-6893
Change-Id: Iebb5f754a1025dfa6e05a94704bdb8a7123b599a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2534986
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new APIs to set preemption buffer in graphics context or
subcontext respectively
nvgpu_gr_ctx_set_preemption_buffer_va()
nvgpu_gr_subctx_set_preemption_buffer_va()
Remove g->ops.gr.set_preemption_buffer_va() hal and use above APIs to
set preemption buffer VA.
Jira NVGPU-1887
Change-Id: I38fb76eaf01d3fc73fd8104f30bcd89be9fa45b6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2076272
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a_update_hwpm_ctxsw_mode() right now validates the incoming
hwpm mode, checks if it is already set, and if not, it will go ahead
and set the new hwpm mode by calling g->ops.gr.ctxsw_prog HALs
Instead of programming hwpm mode in gr_gk20a.c, move the programming
to gr/ctx and gr/subctx units by adding below APIs
nvgpu_gr_ctx_prepare_hwpm_mode() - validate the incoming mode and
check if it is already set
nvgpu_gr_ctx_set_hwpm_mode() - set pm mode in graphics context
nvgpu_gr_subctx_set_hwpm_mode() - set pm mode in subcontext
Add gpu_va field to struct pm_ctx_desc to store the gpu_va to be
programmed into context
Rename NVGPU_DBG_HWPM_CTXSW_MODE_* to NVGPU_GR_CTX_HWPM_CTXSW_MODE_*
and move them to gr/ctx.h
Remove below HALs since they are no longer used
g->ops.gr.ctxsw_prog.set_pm_mode_no_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_stream_out_ctxsw()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: Id2a4d498182ec0e3586dc7265f73a25870ca2ef7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_ctx_zcull_setup(), we configure context/subcontext with
zcull details
This API now does it directly by calling g->ops.gr.ctxsw_prog HAL
Move all context/subcontext setup to gr/ctx and gr/subctx units
respectively
Define and use below new APIs for same
gr/ctx : nvgpu_gr_ctx_zcull_setup()
gr/subctx : nvgpu_gr_subctx_zcull_setup()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: I1b7b16baea60ea45535c623b5b41351610ca433e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011090
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/subctx.c to manage GR subcontext
This unit provides interfaces to allocate/free/load GR subcontext
Add new header file include/nvgpu/gr/subctx.h to declare all the
interfaces.
Right now channel_gk20a structure directly includes a nvgpu_mem
for context header.
Declare a new structure nvgpu_gr_subctx for subcontext and include
this from channel_gk20a
Make all necessary changes to refer ctx_header from subctx instead
of directly referencing it from channel
Jira NVGPU-1613
Change-Id: I9eb1ee8f26fa88d2881f9b294935b65e9cbcc9b4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1990129
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
