At present, for each resume cycle the driver sends the
"nvgpu_cbc_op_clear" command to L2 cache controller, this causes the
contents of the compression bit backing store to be cleared, and results
in corrupting the metadata for all the compressible surfaces already allocated.
Fix this by updating cbc.init function to be aware of resume state and
not clear the compression bit backing store, instead issue
"nvgpu_cbc_op_invalide" command, this should leave the backing store in a
consistent state across suspend/resume cycles.
The updated cbc.init HAL for gv11b is reusable acrosss multiple chips, hence
remove unnecessary chip specific cbc.init HALs.
Bug 3483688
Change-Id: I2de848a083436bc085ee98e438874214cb61261f
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660075
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch fixes a bug in the cbc initialization code for ga10b,
where it was erroneously assumed that a fixed ltc count of only one
should be used for historical reasons. For volta and later, the full
ltc count should be used in cbc-related computation.
Ensure
- CBC base address is 64K aligned
- CBC start address lies within CBC allocated memory
Check CBC is marked safe only for silicon platform.
Bug 3353418
Change-Id: I5edee2a78dc9e8c149e111a9f088a57e0154f5c2
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2585778
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, cbc init and compression tests are failing because MMU marks
cbc to be not safe.
- Modify cbc.get_base_divisor hal to use ltc_count = 1 for Tegra devices
- Update fb.cbc_configure to write compbit_backing_size value to
fb_mmu_cbc_top register.
- After config confirm that CBC is marked safe.
Bug 3353418
Change-Id: I1e9c27f47f7bfcf476f2499231951382e2e8653d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2570550
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
For gv11b, priv ring interrupts were not triggered for PLM L2
registers. So, read back was implemented to confirm data written
to L2 registers.
Verified that LTC registers are not PLM protected, and read back
implemented after write is not necessary.
Replace nvgpu_writel_check with nvgpu_writel.
Bug 200625897
Bug 2989973
Jira NVGPU-5490
Change-Id: Ie0815899589c506e13ab2f9342657cb4d68b8fc8
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2363384
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Directive 4.5 states that identifiers in the same
name space with overlapping visibility should be typographically
unambiguous.
The presence of both the roundup(x,y) and round_up(x,y) macros in
the posix utils.h header incurs a violation of this rule.
These macros were added to keep in sync with the linux kernel variants.
However, there is a key distinction between how these two macros
work in the linux kernel; roundup(x,y) can handle any y alignment while
round_up(x,y) is intended to work only when y is a power-of-two.
Passing a non-power-of-two alignment to round_up(x,y) results in an
incorrect value being returned (silently).
Because all current uses of roundup(x,y) and round_up(x,y) in
nvgpu specify a y value that is a power-of-two and the underlying
posix macro implementations assume as much, it is best to remove
roundup(x,y) from nvgpu altogether to avoid any confusion.
So this change converts all uses of roundup(x,y) to round_up(x,y).
Jira NVGPU-3178
Change-Id: I0ee974d3e088fa704e251a38f6b7ada5a7600aec
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2271385
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change switches nvgpu_timeout_peek_expired() to return a bool
instead of an int to remove advisory rule MISRA 10.5 violations.
MISRA 10.5 states that the value of an expression should not be
cast to an inappropriate essential type.
JIRA NVGPU-3798
Change-Id: I5cf9badaf07493e11a639e47ae4cf221700134ff
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155617
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following ltc related data to struct nvgpu_ltc
and has a reference to it from struct gk20a:
struct nvgpu_spinlock ltc_enabled_lock;
u32 max_ltc_count;
u32 ltc_count;
u32 slices_per_ltc;
u32 cacheline_size;
Added function remove_support for ltc and it is called
during nvgpu remove sequence.
Added following helper functions in ltc.h:
u32 nvgpu_ltc_get_ltc_count(struct gk20a *g);
u32 nvgpu_ltc_get_slices_per_ltc(struct gk20a *g);
u32 nvgpu_ltc_get_cacheline_size(struct gk20a *g);
Removed redudnant ltc.init_fs_state call from vgpu init
sequence since it is getting called from nvgpu_init_ltc_support.
NVGPU-2044
Change-Id: I3c256dc3866f894c38715aa2609e85bd2e5cfe5a
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073417
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved cbc related code and data from gr to cbc unit.
Ltc and cbc related data is moved from gr header:
1. Ltc related data moved from gr_gk20a -> gk20a and it
will be moved eventually to ltc unit:
u32 slices_per_ltc;
u32 cacheline_size;
2. cbc data moved from gr_gk20a -> nvgpu_cbc
u32 compbit_backing_size;
u32 comptags_per_cacheline;
u32 gobs_per_comptagline_per_slice;
u32 max_comptag_lines;
struct gk20a_comptag_allocator comp_tags;
struct compbit_store_desc compbit_store;
3. Following config data moved gr_gk20a -> gk20a
u32 comptag_mem_deduct;
u32 max_comptag_mem;
These are part of initial config which should be available
during nvgpu_probe. So it can't be moved to nvgpu_cbc.
Modified code to use above updated data structures.
Removed cbc init sequence from gr and added in
common cbc unit. This sequence is getting called
from common nvgpu init code.
JIRA NVGPU-2896
JIRA NVGPU-2897
Change-Id: I1a1b1e73b75396d61de684f413ebc551a1202a57
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033286
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pre-volta, cbc config is part of hw ltc and from volta onwards this is
moved to hw fb. Because of this, cbc_init functions are present in both
cbc unit and fb unit. Pre-volta uses cbc_init from cbc unit and from
volta onwards it uses cbc_init from fb unit.
With this patch, unified two cbc_init functions to cbc unit and created
new fb hal for cbc_configure. cbc unit uses fb hal for cbc_config and
fb unit is independent of cbc unit.
JIRA NVGPU-2897
Change-Id: Ib62f0b08547b031bcb5011c837e43c74931a22fe
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030906
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create Compression Bit Cache(CBC) unit to have comptags
cache related functionality in one place. In this patch
Moved following gpu ops from ltc to cbc and renamed accordingly:
void (*init)(struct gk20a *g, struct gr_gk20a *gr);
u64 (*get_base_divisor)(struct gk20a *g);
int (*alloc_comptags)(struct gk20a *g, struct gr_gk20a *gr);
int (*ctrl)(struct gk20a *g, enum gk20a_cbc_op op,
u32 min, u32 max);
u32 (*fix_config)(struct gk20a *g, int base);
To avoid ambiguity renamed function pointer from
init_comptags to alloc_comptags.
Moved following function from ltc.h to cbc.h:
nvgpu_ltc_alloc_cbc -> nvgpu_cbc_alloc
Also changed file name that implemented
nvgpu_cbc_alloc functionality from
os/ltc.c -> os/linux-cbc.c
JIRA NVGPU-2897
Change-Id: Ide32a98567e9a3f0a784d62221a6f484f8343e53
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030194
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
