Update PES, ROP exception handling for NVGPU_ERRATA_3524791. Enable the
errata for all Volta+ chips.
ROP, PES exceptions are being reported using the physical-id,
where logical-id should have been used. All ESR status registers are
reported using logical-id, so this matches with the SW expectation.
To address the (1), update ROP, PES exception handler translate from
physical to logical-id before reading the status registers.
Bug 3524791
Change-Id: Ieacbfb306bb0e69cf0113dc92f18e401573722e3
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680029
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Volta+ chips supports PES floorsweeping and Ampere+(iGPU) chips supports
ROP floorsweeping. At present, the driver isn't aware of PES, ROP
floorsweeping, make the driver PES, ROP floorsweeping aware by introducing the
following fields in nvgpu_gr_config:
- gpc_(rop/pes)_mask: Contains the bit mask of non FSed ROP/PES units per GPC.
- gpc_(rop/pes)_logical_id_map: Translates per GPC ROP/PES physical id to
logical id.
Introduce the following HAL functions to read PES/ROP FS data:
- gops_fuse.fuse_status_opt_(pes/rop)_gpc: This fuction gets the FS
config from the fuse.
- gops_top.get_max_(pes/rop)_per_gpc: Gets the maximum number of PES/ROP
units that can be present in a GPC.
In addition, introduce the enabled flag NVGPU_SUPPORT_PES_FS to identify chips
which support PES floorsweeping, piggyback on NVGPU_SUPPORT_ROP_IN_GPC
enabled flag to identify ROP floorsweeping.
Bug 3524791
Change-Id: I065bab6c02618fe38892c8c890b069c340b85301
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2679570
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new profiler resource type NVGPU_PROFILER_PM_RESOURCE_TYPE_PC_SAMPLER.
Introduce regops HAL get_hwpm_pc_sampler_register_ranges to get
allowlist for PC_SAMPLER resources. Re-generate allowlist files to include
register ranges for PC_SAMPLER resources.
Update uapi header to advertise new resource type
NVGPU_PROFILER_PM_RESOURCE_ARG_PC_SAMPLER.
Bug 3408536
Change-Id: I7009ef822665771eed727da48ef1e89dcc6b9c4b
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2689057
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
a. LAUNCH_ERR
- Userspace error.
- Triggered due to faulty launch.
- Handle using recovery to reset CE engine and teardown the
faulty channel.
b. An INVALID_CONFIG -
- Triggered when LCE is mapped to floorswept PCE.
- On iGPU, we use the default PCE 2 LCE HW mapping.
The default mapping can be read from NV_CE_PCE2LCE_CONFIG
INIT value in CE refmanual.
- NvGPU driver configures the mapping on dGPUs (currently only on
Turing).
- So, this interrupt can only be triggered if there is
kernel or HW error
- Recovery ( which is killing the context + engine reset) will
not help resolve this error.
- Trigger Quiesce as part of handling.
c. A MTHD_BUFFER_FAULT -
- NvGPU driver allocates fault buffers for all TSGs or contexts,
maps them in BAR2 VA space and writes the VA into channel
instance block.
- Can be triggered only due to kernel bug
- Recovery will not help, need quiesce
d. FBUF_CRC_FAIL
- Triggered when the CRC entry read from the method fault buffer
does not match the computed CRC from the methods contained in
the buffer.
- This indicates memory corruption and is a fatal interrupt which
at least requires the LCE to be reset before operations can
start again, if not the entire GPU.
- Better to quiesce on memory corruption
CE Engine reset (via recovery) will not help.
e. FBUF_MAGIC_CHK_FAIL
- Triggered when the MAGIC_NUM entry read from the method fault
buf does not match NV_CE_MTHD_BUFFER_GLOBAL_HDR_MAGIC_NUM_VAL
- This indicates memory corruption and is a fatal interrupt
- Better to quiesce on memory corruption
f. STALLING_DEBUG
- Only triggered with SW write for debug purposes
- Debug interrupt, currently ignored
Move launch error handling from GP10b to GV11b HAL as -
1. LAUNCHERR_REPORT errcode METHOD_BUFFER_ACCESS_FAULT is not
defined on Pascal
2. We do not support GP10b on dev-main ToT
JIRA NVGPU-8102
Change-Id: Idc84119bc23b5e85f3479fe62cc8720e98b627a5
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2678893
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.gr.init.set_default_gfx_regs() to set graphics specific
PRI values for graphics contexts in function nvgpu_gr_obj_ctx_alloc().
Add new HAL gops.gr.init.capture_gfx_regs() to capture and save init
values for the PRIs. Add new struct nvgpu_gr_obj_ctx_gfx_regs to hold the
PRI init values.
Define HAL functions gv11b_gr_init_set_default_gfx_regs() and
gv11b_gr_init_capture_gfx_regs(). Set the HAL functions for
gv11b and ga10b.
Register accessors required to set PRIs are auto-generated.
Bug 3506078
Change-Id: I4c2843a274f3c924e402541e600e104ed0c9ed1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671598
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Jonathan Mccaffrey <jmccaffrey@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below CE interrupts do not have any users(usecases) on safety build;
disable them only on safety build.
1. BLOCKPIPE stall intr: Not used by GFX(VKSC) and CUDA on safety.
2. NONBLOCK_PIPE nonstall intr: Non-stall intrs are not supported
on safety build. Also, this one is not used by GFX(VKSC)
and CUDA.
3. STALLING_DEBUG intr: Added in Orin tree. It is only needed for
debugging. Disable on safety build as there is no current
usage in driver.
4. POISON_ERROR intr: Poison is a fault containment and not
supported on GA10b.
5. INVALID_CONFIG intr: Floor sweeping not supported on functional
safety SKU.
Bug 3548082
Change-Id: I8d97ccb38f138b2c04a780e1c255a64d28723405
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671927
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU needs to support error reporting in QNX-Safety,
QNX-Standard, and Linux. To support error reporting in all these
platform variants, SDL unit will be moved from QNX to common code.
As part of this refactoring activity, this patch removes ops assignment
for report error. Also, it removes API calls that are used to take
time-stamp for stall interrupt thread. This time-stamp APIs will be
brought back later, if required to support periodic diagnostics.
JIRA NVGPU-7353
Change-Id: I38536019dc7165e6a97674863b37d009854af948
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2655958
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The flag pmu->pg->golden_image_initialized is set to
true during initial GPU context creation and is not
cleared while the GPU goes into pm_suspend (during railgate).
Hence, when the GPU resumes after un-railgate it retains
the previous value which can cause ELPG to kick in immediately.
Due to this, when ELPG and Railgating are enabled, IDLE_SNAP
is seen for read access of gr_gpc0_tpc0_sm_arch_r reg.
To resolve this, if golden image is ready set the
pmu->pg->golden_image_initialized to suspend state during railgate,
to delay the early enable of ELPG. Add a new
pmu_init_golden_img_state hal in the NVGPU_INIT_TABLE_ENTRY.
This will be called after all the GR access is done and GPU resumes
completely after un-railgate. This hal will then check if
golden_image_initialized flag is in suspend state, it will set it
to ready state and then re-enable ELPG.
Bug 3431798
Change-Id: I1fee83e66e09b6b78d385bbe60529d0724f79e79
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2639188
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Earlier, buffer metadata support was made dependent on compression.
However that is not required.
Update the enabled flag NVGPU_SUPPORT_BUFFER_METADATA setup for
various hals. Enable it for all from linux characteristics init.
Update REGISTER_BUFFER and GET_BUFFER_INFO ioctls to seggregate
the compile/runtime compression functionality.
If compression is disabled, return error in case comptags are
required else don't fail the REGISTER_BUFFER ioctl.
Bug 200767700
Change-Id: I3850ccc879f180c97b830fb3d652c094b9d28a5b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2614378
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPU HW expects physically contiguous addresses when clearing
the compression bit store in memory. Currently on hypervisor setup,
the DMA_ATTR_FORCE_CONTIGUOUS flag ensures contiguous IPA, but it
is not possible to ensure contiguous physical memory.Disable
compression on virtualized environments until physically contiguous
memory is feasible.
Buffer Metadata support is dependent on compression support.
Move the initialization of NVGPU_SUPPORT_BUFFER_METADATA flag to
common code where NVGPU_SUPPORT_COMPRESSION is initialized.
Bug 200780546
Change-Id: Id94bffc878e275a80948880f0475162d0bb4ddae
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2607830
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Improved SDL heartbeat mechanism detects the interrupts triggered by
SW method and treats them as errors. Hence remove the SW method support
completely from safety build. Registers set by SW methods are now set
by default for all the contexts.
Implement new HAL gops.gr.init.set_default_compute_regs() to set the
registers in patch context. Call this HAL while creating each context.
Update gv11b_gr_intr_handle_sw_method() to treat all compute SW methods
as invalid.
Update unit test test_gr_intr_sw_exceptions() so that it now expects
failure for any method/data.
Bug 200748548
Change-Id: I614f6411bbe7000c22f1891bbaf06982e8bd7f0b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2527249
(cherry picked from commit bb6e0f9aa1404f79bcfbdd308b8c174a4fc83250)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2602638
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On pre-silicon platform, static pg will be
done by nvgpu driver. For this, retain structs
and HALs of static pg.
- Add the static pg support under pre-silicon code.
- On silicon, the static pg will be done by BPMP.
- Rename variables used in static pg for better
readability and consistency
Bug 200768322
JIRA NVGPU-6433
Change-Id: Ib31c0f83b751c2b1563a36bd51af78a0bd12a117
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2594801
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
After CONFIG_UBSAN kernel compilation flag to know any shifting
cause overflow or not enablement ,this is identified.
The register "gr_fe_tpc_fs_r(gpc_index)" is read only after
Volta. The gops where we are computing the index is not needed.
Bug 200727116
Change-Id: Ib2306103389ba9df77fd59d012ec70e775104989
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573296
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
There is HW specific limit on number of channel entries that can be
added for each TSG entry in runlist. Right now there is no checking
to enforce this from SW and hence if User binds more than supported
channels to same TSG, invalid TSG formation error interrupts are
generated.
Fix this by adding appropriate checks in below steps :
- Add new field ch_count to struct nvgpu_tsg to keep track of
channels bound to TSG.
- Define new hal gops.runlist.get_max_channels_per_tsg() to retrieve
HW specific maximum channel count per TSG.
- Implement the HAL for gk20a and gv11b chips, and assign new HALs for
all chips appropriately.
- Increment ch_count while binding the channel to TSG and decrement it
while unbinding.
- While binding channel to TSG, Check if current channel count is
already equal to max channel count. If yes, print an error and bail
out.
Bug 200763991
Change-Id: Ic5f17a52e0fb171d1c020bf4f085f57cdb95f923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2582095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Issue observed:
- In GA10B, it was observed that after recovery happens
ELPG does not engage.
- It was because, after CE reset, when nvgpu_submit_twod test
was run to engage ELPG, IDLE_FLIPPED_PWR_OFF signal was asserted.
- This means that when ELPG was engaged (engine is in PWR_OFF),
some idle signal flips (becomes non-idle) and this causes
IDLE_SNAP. After IDLE_SNAP is hit, ELPG will not engage further.
- After debugging from WAVES, it was observed that:
LCE0/LCE1 are not done with the reset sequence.
- The state of these LCE is RESET0. A pri request (pri read
to NV_CE_PCE_MAP register in CE) is seen that kicks it out of
RESET0. After this state, it goes through few states to update
some internal states (states RESET1/RESET2/PCE_MAP etc) and then
eventually settles down to IDLE state.
Solution:
- Read ce_pce_map_r register in recovery sequence (after ce reset).
- It is observed that when this read is added recovery is complete
and post that when nvgpu_submit_two test is executed, ELPG is engaging.
- This means that a pri read is needed after CE reset so that it settles
to idle state properly and post that ELPG can engage properly.
Bug 200734258
Change-Id: I5bb84921ca62a740fde81ffe6c29ccde4ebb341b
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554493
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On all chips except ga10b, the number of ROP, L2 units per FBP
were in sync, hence, their FS masks could be represented by a single
fuse register NV_FUSE_STATUS_OPT_ROP_L2_FBP. However, on ga10b, the ROP
unit was moved out from FBP to GPC and it no longer matches the number
of L2 units, so the previous fuse register was broken into two -
NV_FUSE_CTRL_OPT_LTC_FBP, NV_FUSE_CTRL_OPT_ROP_GPC.
At present, the driver reads the NV_FUSE_CTRL_OPT_ROP_GPC register
and reports incorrect L2 mask. Introduce HAL function
ga10b_fuse_status_opt_l2_fbp to fix this.
In addition, rename fields and functions to exclusively fetch L2 masks,
this should help accommadate ga10b and future chips in which L2 and ROP units
are not in same. As part of this, the following functions and
fields have been renamed.
- nvgpu_fbp_get_rop_l2_en_mask => nvgpu_fbp_get_l2_en_mask
- fuse.fuse_status_opt_rop_l2_fbp => fuse.fuse_status_opt_l2_fbp
- nvgpu_fbp.fbp_rop_l2_en_mask => nvgpu_fbp.fbp_l2_en_mask
The HAL ga10b_fuse_status_opt_rop_gpc is removed as rop mask is not
used anywhere in the driver nor exposed to userspace.
Bug 200737717
Bug 200747149
Change-Id: If40fe7ecd1f47c23f7683369a60d8dd686590ca4
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551998
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GFxP preemption for graphics contexts is not supported in safety.
But the support was enabled along with CONFIG_NVGPU_GRAPHICS since GFxP
preemption was protected under same config.
Add a separate config CONFIG_NVGPU_GFXP to protect all GFxP specific
code, enum values, and HALs.
Disable the config in safety profile.
Jira NVGPU-6893
Change-Id: Iebb5f754a1025dfa6e05a94704bdb8a7123b599a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2534986
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new Central Interrupt Controller(CIC) unit in common code.
The interrupt handling is done in a distributed manner currently.
The error handling policy for different errors resides in each unit's
ISR code. The goal is to converge this data under one central place -
the CIC unit.
This patch creates framework for CIC unit and moves the gv11b QNX
safety LUT to CIC unit. All the error reporting APIs from different
units are also moved to CIC.
New APIs are exposed by CIC unit to access its internal data like:
1. Struct err_desc - the static err handling /injection data per
error id
2. Num_hw_modules - the number of error reporting HW units
supported by CIC
Init and deinit of CIC unit:
1. CIC unit should be initialized earlyon during boot so that it
is available for any interrupt handling.
2. Initialize CIC just before the interrupts are enabled during
boot.
3. Similarly, CIC is disabled late during deinit cycle; right
after the interrupts are masked.
LUT:
1. LUT is currently used only for reporting error to safety
services in gv11b QNX safety build.
2. This error handling policy LUT currently has only two levels
of handing - correctable and quiecse.
3. Once, the error handling policy decision is moved from leaf
unit nodes to CIC, LUT will be updated to have additional levels
like fast recovery and full recovery.
4. Also, then a separate LUT will be added for each platform/build.
5. In current framework, the LUT is set to NULL for all
configurations except gv11b.
report_err() ops is added to report error to safety services.
This ops is only effective for gv11b qnx build; and set to NULL for
other configurations.
NVGPU-6521
NVGPU-6523
NVGPU-6750
NVGPU-6758
NVGPU-6760
NVGPU-6754
Change-Id: I24be7836a96d787741e37b732e19863ed8014635
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2518683
Reviewed-by: Ajesh K V <akv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Separated set_atomic_mode functionality from
init_fs_state/enable_nvlink and created new
fb gops for set_atomic_mode.
In gpu init sequence, set_atomic_mode is
called after acr_construct_execute to take care
of design changes required for nvgpu-next
architectures.
Updated fb_gv11b_init_test to use set_atomic_mode
gops along with init_fs_state.
Bug 3268664
Change-Id: I1ab9eb21cc4cce77f3325c4e8821a75b6e85fba2
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2508095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch is to disable the clock arbitor for TU104.
TU104 is not a POR for Drive 6.0 so disabling it to easy migration
of clk arb for GA100.
As a first step all the NVRM Clock tests will be skipped by setting
NVGPU_SUPPORT_CLOCK_CONTROLS to false for TU104.
Then clk arbitor will be rewritten for GA100 and enabled back.
This patch implements by adding a new flag NVGPU_CLK_ARB_ENABLED which
holds the status of clk arbitor for each platform and disables them for
TU104
Bug 200699763
Change-Id: I51cd5c7821bdc0b48080c17a70735925b278ddf5
Signed-off-by: absalam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2515086
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Update the nvgpu_runlist_update_for_channel() function:
- Rename it to nvgpu_runlist_update()
- Have it take a pointer to the runlist to update instead
of a runlist ID. For the most part this makes the code
better but there's a few places where it's worse (for
now).
This starts the slow and painful process of moving away from
the non-runlist code using runlist IDs in many places it should
not.
Most of this patch is just fixing compilation problems with
the minor header updates.
JIRA NVGPU-6425
Change-Id: Id9885fe655d1d750625a1c8aceda9e67a2cbdb7a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470304
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The NEXT bit can remain set for the channel if timeslice expires before
scheduler clears it. Due to this nvgpu fails TSG unbind and in turn
nvrm_gpu fails channel close. In this case, checking the channel hw
state after some time can help see NEXT bit cleared by scheduler.
Reenable the tsg and return -EAGAIN to nvrm_gpu for it to retry again.
Bug 3144960
Change-Id: I35f417f02270e371a4e632986b73a00f8a4f921a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2468391
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add ptimer register offsets to regops allowlist for testing. New
allowlist restricts regops only to reserved resources, this makes it
difficult to test the interface since only HWPM registers can be
accessed and that could have side effects on system.
Having ptimer registers as test offsets has advantage that the offsets
do not change across chips, registers are read-only, and values are
always incrementing so a test can verify read regops and test various
flags of interface.
Add gops.ptimer.get_timer_reg_offsets() HAL to return timer offsets.
Add static function add_test_range_to_map() that adds timer offsets to
allowlist always.
In nvgpu_profiler_validate_regops_allowlist() return success if timer
offsets are hit in range search.
Bug 2510974
Jira NVGPU-5360
Change-Id: I8b51bb92e43e8b1bbe903c874a429341659ef603
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460002
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Implement below functions:
- nvgpu_profiler_quiesce_hwpm_streamout_resident
Teardown sequence when context is resident or in case profiling
session is a device level session.
- nvgpu_profiler_quiesce_hwpm_streamout_non_resident
Teardown sequence when context is non resident
- nvgpu_profiler_quiesce_hwpm_streamout
Generic sequence to call either of above API based on whether
context is resident or not.
Trigger HWPM streamout teardown sequence while unbinding resources
in nvgpu_profiler_unbind_hwpm_streamout()
Add a new HAL gops.gr.is_tsg_ctx_resident to call
gk20a_is_tsg_ctx_resident() from common code.
Implement below supporting HALs for resident teardown sequence:
- gops.perf.pma_stream_enable()
- gops.perf.disable_all_perfmons()
- gops.perf.wait_for_idle_pmm_routers()
- gops.perf.wait_for_idle_pma()
- gops.gr.disable_cau()
- gops.gr.disable_smpc()
Jira NVGPU-5360
Change-Id: I304ea25d296fae0146937b15228ea21edc091e16
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2461333
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
