Remove including gk20a.h from pmu_gk20a.h. This causes a fallout
as some #includes were missing.
gr_gp10b.h uses mem_desc, but did not include mm_gk20a.h. Add the
include.
Including mm_gk20a.h in gr_gp10b.h causes recursive include, as
mm_gk20a.h has some gr defines. Move the defines to gr_gk20a.h to
remove the dependency.
gr_ctx_gk20a.h used struct gk20a pointers, but did not forward
declare it. Add a forward declaration.
gr_gk20a.h uses dbg_session_gk20a, but was missing forward
declaration.
gr_gk20a.h did not include nvgpu.h but it uses preemption types from
that header. Add include.
Change-Id: I2168e2303b55e0d187b816bcb26f37c8af1649ba
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1283717
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Prints out Timeslice value, Interleave level, Graphics preemption
mode and compute preempt mode along with chid, tsgid, pid.
Enable it with setting dbg_mask with 8192
Bug 1855710
Change-Id: I60efef9810587f8fedd4e2ba62ba67d06d84faea
Signed-off-by: Mihir Thakkar <mthakkar@nvidia.com>
Reviewed-on: http://git-master/r/1287141
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
The fuse headers are unified and moved all the content of
linux/tegra-fuse.h to the soc/tegra/fuse.h to have the
single fuse header for Tegra.
Use unified fuse header soc/tegra/fuse.h.
bug 200260692
Change-Id: Icab3ba5c3dbcd3fa831455c2f336942d356ff5ac
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/1287498
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use the timers API in the gk20a code instead of Linux specific
API calls.
This also changes the behavior of several functions to wait for
the full timeout for each operation that can timeout. Previously
the timeout was shared across each operation.
Bug 1799159
Change-Id: I2bbed54630667b2b879b56a63a853266afc1e5d8
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1273826
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gp10b_round_clk_rate(), we right now return next
higher freq value than requested if requested value
matches a value in the table
Fix this by adding a right comparison
Bug 200194487
Change-Id: Ia99abfe4b247701d5ee1cda26b3ffcc18efba353
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1284302
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Remove EMC floor when GPU frequency is Fmin. At Fmin,
we most likely require a very low memory bandwidth.
At Fmin on load, actmon should sufficiently scale EMC
and hence not bottlenecking GPU.
Bug 1850297
Change-Id: I98b9dae648ea28910d534a9286ce2e9e91ea5fec
Signed-off-by: Cyril Raju <craju@nvidia.com>
Reviewed-on: http://git-master/r/1284572
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Move the gp10b HW headers to a new directory specially for them:
include/nvgpu/hw/gp10b
And change the code to include like so:
#include <nvgpu/hw/gp10b/hw_fb_gp10b.h>
This is part of the process to restructure the nvgpu driver.
Bug 1799159
Change-Id: Ic80ea5b7f5c280839e502e2178a345181f7a7ef9
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1280326
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
- Added struct pmu_pg_stats_data to extract
data from multiple version of pmu pg statistics
- Added pmu_pg_stats_v2 interface to fetch
PG statistics data from PMU
- Added MSCG debugfs node to read mscg
statistics from PMU.
- Added pmu_elpg_statistics HAL support for
gp106 PG statistics read.
- Made changes to gp104/gp106
pmu_elpg_statistics HAL to support
for struct pmu_pg_stats_data
JIRA DNVGPU-165
Change-Id: I2b9e89c0fae90deb45006c4478170b9a97b56603
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1252798
(cherry picked from commit 3c073b15fd991db8d65b3171b02c161294be40cd)
Reviewed-on: http://git-master/r/1271615
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gp10b_round_clk_rate(), we currently call
clk_round_rate() to round the clock rate for us
But since the frequency table is prepared
using the frequency values supported in h/w,
we can round the rate locally using the table
Bug 1827281
Change-Id: I85d034326539590352badceb4164aa5d89ee8842
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1280630
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We right now get min and max frequencies, and then
interpolate rest of the frequencies.
With this approach, we do not select exact
frequencies as supported by h/w
Fix this so that we query all supported frequencies
using clk_round_rate() and then select every N'th
frequency to keep number of frequencies under limit
Use GP10B_FREQ_SELECT_STEP (currently set to 8)
to configure frequency selection step
Raise GP10B_MAX_SUPPORTED_FREQS to 200 since h/w
supported frequencies could be in that range
Bug 1827281
Change-Id: Id8678d7a0280a249e4affbba084ff2e33b6694e6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1280629
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In gr_gp10b_set_preemption_mode(), skip setting anything
if both graphics and compute preemption modes are
already set
Bug 200263471
Change-Id: I2788464750835da8f6396c6c1ca8356a63758c80
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1275465
GVS: Gerrit_Virtual_Submit
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
- update gp106 pg engine init/list/features HALs
to support MS engine
- Added defines & interface for lpwr tables read from vbios.
- lpwr module which reads idx/gr/ms table from vbios to
map rppg/mscg support with respective p-state
- lpwr module public functions to control lpwr
features enable/disable mscg/rppg & mclk-change
request whenever change in mclk-change parameters
- lpwr public functions to know rppg/mscg support for
requested pstate,
- added mutex t prevent PG transition while arbiter
executes pstate transition
- nvgpu_clk_arb_get_current_pstate() of clk arbiter to
get current pstate
JIRA DNVGPU-71
Change-Id: Ifcd640cc19ef630be1e2a9ba07ec84023d8202a0
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1247553
(cherry picked from commit 8a441dea2410e1b5196ef24e56a7768b6980e46b)
Reviewed-on: http://git-master/r/1270989
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added rppg module to init GR/MS-RPPG.
mscg is dependent on gr-rppg & without
gr-rppg engage mscg does not engage.
- Update pg engines HAL to return supported
pg engines & its sub features
JIRA DNVGPU-71
Change-Id: Ib0fd2d79b509f6f2f1dabae6e2b5aebcc80b5691
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1247486
(cherry picked from commit 86e45fa62e6a6b295f73c0173f0117ae9f78a5e9)
Reviewed-on: http://git-master/r/1270762
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We currently do not allow resetting preemption
modes once set
Relax this check to allow upgrading preemption
modes. Downgrading of preemption modes is still
not allowed
Bug 200263471
Change-Id: Ie2dae910028929090899a661f4b8b9dd4d6d7ee7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1269472
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Remove FB ISO clock gating register from initializion list. The
register does not exist on GPUs without own memory.
Change-Id: I86a8c8050baad88a99029771511363f2a1d44341
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1265297
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
We can trigger CILP only if SM debug mode is on.
So in fecs interrupt handler, we could have graphics context
running for which SM debug mode is disabled.
And in that case we skip posting of cilp completion
events to UMD.
But since CILP event was anyways triggered, we need to post
events to UMD irrespective of SM debug mode is enabled
at that point or not
Hence remove check gk20a_gr_sm_debugger_attached() for
posting events to UMD
Bug 200243092
Change-Id: I54ad205be11ec6d5034d524bfbb28f8a1fa72993
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1263591
(cherry picked from commit e6259e2d0d5a4bb5929e70e03e154f8b82ae3600)
Reviewed-on: http://git-master/r/1264780
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
gp10b does not have an fbpa unit, although the
hw header files claim it does. Hardcode all fbpa
values to 0.
Bug 200249125
Change-Id: I6ed63b3231d7af8e31ccf5047d56bdb85f05a9d9
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1256422
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In gp10b_ce_nonstall_isr(), we trigger a semaphore wakeup.
Currently, we clear the interrupt status register after the
wakeup is complete. There is potential for an interrupt to
come in while the wake-up operation is in progress, and it
is possible that:
1) We miss processing the interrupt in that ISR iteration AND
2) We clear the interrupt status register anyways
This change clears the status register before triggering wakeup,
so the interrupt will properly re-fire.
Bug 200244458
Change-Id: Ia3338252eeea4eb60d11c0e241279989a46dac04
Signed-off-by: Sachit Kadle <skadle@nvidia.com>
Reviewed-on: http://git-master/r/1253107
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
get_litter_value API is updated to use int instead of
enum type.
JIRA GV11B-21
Change-Id: I982fdfe372f4be38aa4ed026a23e936d73190e79
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1252212
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Fix small problems related to signed versus unsigned comparisons
throughout the driver. Bump up the warning level to prevent
such problems from occuring in future.
Change-Id: Ib7026728ef0e8c3c9e68956fc9794ec3a786a8a2
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1252069
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPU frequencies can be set by powerhal when GPU is railgated,
and before this change that would cause EMC floors to remain
set until GPU is unrailgated.
After this change, EMC floors are not requested by the GPU
client when the GPU is railgated. It is ok to ignore the
requests, as the GPU client maxes the floor when powering
up.
Bug 1807560
Change-Id: I9a0d58b0288edbd03b2edf09580ecabd9b74f0c2
Signed-off-by: Juha Lainema <jlainema@nvidia.com>
Reviewed-on: http://git-master/r/1216233
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Ilan Aelion <iaelion@nvidia.com>
Reviewed-by: Cyril Raju <craju@nvidia.com>
Tested-by: Cyril Raju <craju@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
- Define fuse macros depending on kernel version as fuse
offset got changed in K4.4 and for K4.4 fuse defines are
defined in common header file (tegra-fuse.h)
- Use fuse control read/write APIs when reading control
registers for K4.4
Bug 200243956
Change-Id: I34dabd1a307d10010cb89ac6a5f1e3f5b177c0fc
Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
Reviewed-on: http://git-master/r/1245825
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
The lowest page table level may hold very few entries for mappings of
large pages, but a new page is allocated for each list of entries at the
lowest level, wasting memory and performance. Compact these so that the
new "allocation" of ptes is appended at the end of the previous
allocation, if there is space.
Bug 1736604
Change-Id: I4c7c4cad9019de202325750aee6034076e7e61c2
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1222810
(cherry picked from commit 97303ecc946c17150496486a2f52bd481311dbf7)
Reviewed-on: http://git-master/r/1234995
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Use entry->mem for determining the target aperture bits of the memory
block represented by entry->mem in update_gmmu_pde0_locked(), instead of
pte->mem that holds the parent memory where this bit is written to.
Previously this has worked because all page tables have been in the same
aperture, but really large userspace allocations may push a part of them
suddendly to sysmem.
Bug 1809939
Change-Id: I3372487c6ae9793018ce44552ded3fb1ba4d145a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1218636
(cherry picked from commit a92596f6e8e621e51b6afae9ab7e62044d6311eb)
Reviewed-on: http://git-master/r/1220525
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For bar2 and pmu instance blocks, use gk20a_aperture_mask()
to select target address (i.e. if address is in sysmem or
vidmem) based on aperture
Also add target accessors for gr_fecs_new_ctx and
gr_fecs_arb_ctx_ptr
Jira DNVGPU-22
Change-Id: Ieaa80bd83a4191fe57b7fba6e0f9cdaeb195a077
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1216138
(cherry picked from commit 7a9f4175abc5dddf0879215de4637b7b6eb0ab7b)
Reviewed-on: http://git-master/r/1219712
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add support for cyclestats snapshots in the virtual case
Bug 1700143
JIRA EVLR-278
Change-Id: I353efac6a17704c815a99745ac04d2c3d831351b
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1216644
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Since page tables could either reside either in sysmem
or vidmem, use gk20a_mem_get_base_addr() to get the
base address for buffer
This API will take care of returning proper base address
Jira DNVGPU-20
Change-Id: I3422b51c3ffb8fb86f1dc5095263fc8f19dae44d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1206407
(cherry picked from commit 3c4b22c35b2c4eec33234c2f8dccd9de9422d093)
Reviewed-on: http://git-master/r/1210962
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Event notifications on TSGs should only be sent to the channel that caused the
event to happen in the first place, not evey channel in the tsg. Any more and
the debugger will not be able to tell what channel actually got the event.
Worse yet, if all the channels in a tsg are bound to the same debug session
(as is the case with cuda-gdb), then multiple nvgpu events for the same gpu
event will be triggered, causing events to be buffered and the client to get
out of sync.
One gpu exception, one nvgpu event per tsg.
Bug 1793988
Change-Id: Iee36c774f193554ffb9ab7c1650ee0610e476a99
Signed-off-by: Cory Perry <cperry@nvidia.com>
Reviewed-on: http://git-master/r/1194206
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Unknown engine is expected, as we do not support all dGPU engines.
Remove the error spew.
JIRA DNVGPU-26
Change-Id: I3d43253b8cab4e51b426536e4899a62156d0da16
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1206465
(cherry picked from commit a3fa13f6be4ff60e90558326474af3d1b315aa43)
Reviewed-on: http://git-master/r/1208408
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
