Subcontext PDBs and valid mask in the instance blocks of the channels
in various subcontexts has to be updated when new subcontext is
created or a subcontext is removed.
Replayable fault state is cached in the channel structure. Replayable
fault state for subcontext is set based on first channel's bind
parameter. It was earlier programmed in function channel_setup_ramfc.
init_inst_block_core is updated to setup TSG level pdb map and mask.
Added new hal gv11b_channel_bind to enable the subcontext on channel
bind.
Bug 3677982
Change-Id: I58156c5b3ab6309b6a4b8e72b0e798d6a39c1bee
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2719994
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
During gpu re-initialization(rail gate exit/sc7 exit), vab buffers
needs to programmed in hw by writing vab buffer address to
NV_PFB_PRI_MMU_VIDMEM_ACCESS_BIT_BUFFER_LO(HI)_ADDR and
setting vab entries to NV_PFB_PRI_MMU_VIDMEM_ACCESS_BIT_BUFFER_SIZE_VAL.
For this moved nvgpu nvgpu_fb_vab_init_hal from
nvgpu_init_mm_setup_sw to nvgpu_init_mm_support.
nvgpu_init_mm_setup_sw is skipping during re-init, because
sw_ready is set during first boot.
Bug 3468562
Change-Id: Iee2bd4bc5165397ea4f9cca0ba6744eaf361a342
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2643244
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Martin Radev <mradev@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, ltc fs_state is initialized during ltc init support. However,
ltc cbc_param and cbc_param2 registers do not seem to be providing
correct data if ltc.init_fs_state is called before fb.init_fs_state.
- Create fb.init_fb_support hal to initialize fb.
- Trigger init_fb_support before init_ltc_support.
Bug 2969956
Bug 2957808
JIRA NVGPU-4666
Change-Id: I54d697d27b9d9c6318c4ef459d215b6f82cd5571
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2345673
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The ecc init, handling for the fb unit is refactored to improve reusability
for nvgpu-next.
The following changes have been done:
- fb.ecc:
This is a new subunit within fb and contains the following functions:
- init: Moved from fb.fb_ecc_init.
- free: Moved from fb.fb_ecc_free.
- l2tlb_error_mask: Fetch bit mask for corrected, uncorrected errors supported
by the unit.
- fb.intr:
This unit has been updated to include the following ecc interrupt, error
handlers:
- handle_ecc: Top level interrupt handler for fb ecc errors.
- handle_ecc_l2tlb: Handle errors within l2tlb memory.
- handle_ecc_hubtlb: Handle errors within hubtlb memory.
- handle_ecc_fillunit: Handle errors within fillunit memory
Jira: NVGPU-5032
Change-Id: I1a26c1823eb992e0e0175250b969f1186dff6e62
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2333271
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implmented functions to load and execute PUB which
is the safety POR.
PUB has following functionality:
1) Lower PLM
2) Reset PMU
3) FBPA register access to devtools
Secure Boot and Runtime (SBR) microcode comprises of
single PLM Update Binary (PUB) which will execute on
SEC2 Engine Falcon. NVGPU shall load and execute PUB
and wait for falcon halt. On successful halt NVGPU
shall proceed with ns ucode loading on respective
falcons.
NVGPU-4549
Change-Id: I8ea897a026bbe2b1714823aba51bfa51864dd68a
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292330
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
fbpa related functions are not supported on igpu safety. Don't
compile them if CONFIG_NVGPU_DGPU is not set.
Also compile out fb and ramin hals that are dgpu specific.
Update the tests for the same.
JIRA NVGPU-4529
Change-Id: I1cd976c3bd17707c0d174a62cf753590512c3a37
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2265402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add macros for whitelisting coverity violations. These macros use pragma
directives. The pragma directives and whitelisting macros are only
enabled when a coverity scan is being run.
The whitelisting macros have been added to a new header called
static_analysis.h. The contents of safe_ops.h (CERT C safe ops) have
been moved into static_analysis.h because this will be the new header
for static analysis related macros/defines/etc.
JIRA NVGPU-3820
Change-Id: I9c63f20f670880b420415535738034619314b7c3
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2180600
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
CE app functionality from nvgpu is non-safe for igpu. CE engines init
/reset/cg related functionality is required in safety. Hence move the
CE app logic under CONFIG_NVGPU_DGPU flag and update the sources
accordingly.
JIRA NVGPU-3814
Change-Id: I37aa00b1184baccd5fe569ec315be60ac42dac9b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2168956
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
INT-30 requires checking for overflow of arithmetic operations on
unsigned integers.
INT-31 requires bounds checking for unsigned integers cast to
smaller size.
Fix these violations by using the safe ops in nvgpu.common.mm.mm and
nvgpu.hal.mm.mm.
JIRA NVGPU-3848
Change-Id: I2751a14fb1f45d330a92040ac3c7777c52ae9199
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158860
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the PTE size computation from MM to VM where it belongs. This
function is only ever used in vm.c so move it there and make it
static.
This is part of the broader effort to cleanup the top level unit
header files and only expose functions needed by other units in the
top level unit header files.
JIRA NVGPU-3544
Change-Id: Ifd8ed36723eb62e19a7e6563ef52dc9c3adb3f52
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2128075
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the nvgpu_init_mutex function return void.
In linux case, this doesn't affect anything since mutex_init
returns void.
For posix, we assert() and die if pthread_mutex_init fails.
This alleviates the need to error inject for _every_
nvgpu_mutex_init function in the driver.
Jira NVGPU-3476
Change-Id: Ibc801116dc82cdfcedcba2c352785f2640b7d54f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130538
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below MISRA 17.7 violation is reported in nvgpu.common.mm.mm
${TEGRA_TOP}/kernel/nvgpu/drivers/gpu/nvgpu/common/mm/mm.c:645:
misra_c_2012_rule_17_7: The return value of a non-void function
"*g->ops.bus.bar1_bind" is unused.
Fix this by checking return value and returning an error in
case of failure.
Jira NVGPU-3331
Change-Id: Iab43d630163af782d3cc87989a64062516a4cd92
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2116706
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below MISRA 10.1 violation is reported in nvgpu.common.mm.mm
${TEGRA_TOP}/kernel/nvgpu/drivers/gpu/nvgpu/common/mm/mm.c:378:
misra_violation: The expression "g->mm.vidmem.size" of non-boolean
essential type is being interpreted as a boolean value for the
operator "&&".
Fix this by explicitly checking g->mm.vidmem.size > 0U.
Jira NVGPU-3331
Change-Id: I1bb54736593801c7cb684973f411459dae6f008d
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2116705
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gv11b MMU fault handling code into a new mm.mmu_fault HAL.
Also move the existing gmmu_mmu_fault HAL code into this HAL as they
are basically the same logical entity.
JIRA NVGPU-2042
JIRA NVGPU-1313
Change-Id: I41d3e180c762f191d4de3237e9052bdc456f9e4c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The alloc_insty_block() function in the MM HAL is not a HAL. It does
not abstract any HW accesses; instead it just wraps a dma allocation.
As such remove it from the HAL and move the single gk20a implementation
to common/mm/mm.c as nvgpu_alloc_inst_block().
JIRA NVGPU-2042
Change-Id: I0a586800a11cd230ca43b85f94a35de107f5d1e1
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109049
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gk20a_init_mm_setup_hw to common code. This function just
calls HALs to initialize various bits of HW. However, since this
code assumes that (some of) the HALs are present this code is treated
as a vGPU HAL (that is it's NULL for vGPU).
This patch also renames the MM HW init HAL.
Sicne the gv11b variant of this setup_hw HAL did have some differences
from the gk20a version the new common version required some work. The
gv11b code was copied into the common function but now the gv11b
specific calls were HAL'ified (since they will need to be anyway for
the MMU fault buf code) and protected by an if-condition.
JIRA NVGPU-2042
Change-Id: I959293394ee8793923d858ee37b7ce346096654f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104541
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make a hal/mm/gmmu sub-unit for the GMMU HAL code. Also move the
gk20a specific HAL code there. gp10b will happen in the next patch.
This change also updates all the GMMU related HAL usage, of which
there is quite a bit. Generally the only change is a .gmmu needs to
be inserted into the HAL path. Each HAL init was also updated.
JIRA NVGPU-2042
Change-Id: I6c46bdfddb8e021f56103d9457fb3e2a226f8947
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new MM HAL directory to contain all MM related HAL units.
As part of this change add cache unit to the MM HAL. This contains
several related fixes:
1. Move the cache code in gk20a/mm_gk20a.c and gv11b/mm_gv11b.c to
the new cache HAL. Update makefiles and header includes to take
this into account. Also rename gk20a_{read,write}l() to their
nvgpu_ variants.
2. Update the MM gops: move the cache related functions to the new
cache HAL and update all calls to this HAL to reflect the new
name.
3. Update some direct calls to gk20a MM cache ops to pass through
the HAL instead.
4. Update the unit tests for various MM related things to use the
new MM HAL locations.
This change accomplishes two architecture design goals. Firstly it
removes a multiple HW include from mm_gk20a.c (the flush HW header).
Secondly it moves code from the gk20a/ and gv11b/ directories into
more proper locations under hal/.
JIRA NVGPU-2042
Change-Id: I91e4bdca4341be4dbb46fabd72622b917769f4a6
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved fb interrupt handling related code to fb intr sub-unit.
Moved following hals from fb hal to fb intr hal and renamed to:
void (*enable)(struct gk20a *g);
void (*disable)(struct gk20a *g);
void (*isr)(struct gk20a *g);
gk20a_readl/writel are replaced with nvgpu_read/writel.
Hals are populated with new function names and code is modified
to call new hals.
Moved ecc interrupt to gv11b_fb_intr_handle_ecc in a separate file:
fb_intr_ecc_gv11b.c/h
JIRA NVGPU-2034
Change-Id: I80c7110c902c4e082561cf7cbe65c20eb9acb661
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090070
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
