- F/W version update for gv11b PMU ucode of
CL https://git-master.nvidia.com/r/#/c/1628288/
Current CL has PMU F/W version for ucode bin of
P4 CL# 23378914
P4 CL# & its changes.
- 23378914
- Don't post "PMU_PG_EVENT_IDLE_SNAP" event in
method pgConvertPgInterrupts_GP10X()
- 23355380
- Remove debug code included by mistake in P4
change list #23354716
- 23354716
- Made change to point CONVERT_PG_INTERRUPTS of
gv11b to _GP10x - pgConvertPgInterrupts_GP10X()
- Removed PMU halt upon FIFO preempt timeout in
_fifoPreemptRunlist_GP10X()
Bug 2039371
Bug 200377983
Change-Id: I8ce7cb926203b329308944235a06933768ed2a5f
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1628380
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: David Martinez Nieto <dmartineznie@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added nvgpu_flcn_mem_scrub_wait() to
falcon interface layer to poll imem/dmem
scrubbing status complete check for 1msec
with status check interval of 10usec.
-Called nvgpu_flcn_mem_scrub_wait() in
falcon reset interface to check scrubbing
status upon falcon/engine reset.
-Replaced mem scrubbing wait check code in
pmu_enable_hw() by calling
nvgpu_flcn_mem_scrub_wait()
Bug 200346134
Change-Id: Iac68e24dea466f6dd5facc371947269db64d238d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598644
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Created nvgpu_kill_task_pg_init() method to set
pmu state to PMU_STATE_EXIT & make thread stop,
and poll to confirm thread stopped.
- Check for PMU/SEC2 ACR secure boot completion
status & initiate pg init thread kill if ACR boot
exits with error, which fails to validate &
boot LS-PMU.
- Set pmu state to PMU_STATE_OFF after thread kill
during ACR boot failure.
Issue: pg init task blocks if PMU boot fails &
cause kernel to show message "task nvgpu_pg_init_g:2120
blocked for more than 120 seconds"
Bug 200346134
Change-Id: I5270426080dcd628ccca4df798005294c19767a0
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1582593
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Maintain a list of boardobj and boardobjgrp, so that we can free
related objects when removing pmu support. A flag is added in
boardobj so that the destructor can determine if it should free
the object. This 'allocated' flag is false when the object is
embedded into another structure, which should be freed through
other means.
JIRA EVLR-1959
Bug 200352099
Change-Id: I6a3ff3c57f7428dd145deacf98f2992a9be9796d
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1586596
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU response(intr callback for messages) can run faster
than the kthread posting commands to PMU.
This causes the PMU message callback to skip important pmu
state change(which happens just after the PMU command is posted).
Solution:
State change should be triggered from only inside the intr callback.
Other places can only update the pmu_state variable.
This change also adds error check to print in case command post fails.
JIRA GPUT19X-20
Change-Id: Ib0a4275440455342a898c93ea9d86c5822e039a7
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1583577
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added status check for nvgpu_pmu_disable_elpg() return value
& prints error information upon failure.
- Below CID's are due to missing status check of function
nvgpu_pmu_disable_elpg() return value, so this CL helps to fix it
2624546
2624547
2624548
Bug 200291879
Change-Id: I263fc6bc9e2667af478bfd7160fe205167556f99
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1565998
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
The Pg init task hogs the kernel by having a wait condition with no timeout
waiting for pg state change, but ps state may not post a change in a long time
depending on runtime conditions, so we get soft-crashes warning spews in the
kernel
We solve this by making the condition wait interruptible
bug 200346134
Change-Id: I8a3349031acc5065b767dc22eec6e5df113d3ad7
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1566545
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
This change solves crashes during bind that were introduced in the driver
during the OS unification refactoring due to lack of coverage of the remove()
function.
The fixes during remove are:
(1) Prevent NULL dereference on GPUs with secure boot
(2) Prevent NULL dereferences when fecs_trace is not enabled
(3) Added PRAMIN blocker during driver removal if HW is no longer accesible
(4) Prevent double free of debugfs nodes as they are handled on the
debugfs_remove_recursive() call
(5) quiesce() can now be called without checking is HW accesible flag is set
(6) added function to free irq so no IRQ association is left on the driver after
it is removed
(7) prevent NULL dereference on nvgpu_thread_stop() if the thread is already
stopped
JIRA: EVLR-1739
Change-Id: I787d38f202d5267a6b34815f23e1bc88110e8455
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1563005
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move non-function pointer members out of the pmu and pmu_ver
substructs of gpu_ops. Ideally gpu_ops will have only function
ponters, better matching its intended purpose and improving
readability.
- g.ops.pmu_ver.cmd_id_zbc_table_update has been changed to
g.pmu_ver_cmd_id_zbc_table_update
- g.ops.pmu.lspmuwprinitdone has been changed to
g.pmu_lsf_pmu_wpr_init_done
- g.ops.pmu.lsfloadedfalconid has been changed to
g.pmu_lsf_loaded_falcon_id
Boolean flags have been implemented using the enabled.h API
- g.ops.pmu_ver.is_pmu_zbc_save_supported moved to
common flag NVGPU_PMU_ZBC_SAVE
- g.ops.pmu.fecsbootstrapdone moved to
common flag NVGPU_PMU_FECS_BOOTSTRAP_DONE
Jira NVGPU-74
Change-Id: I08fb20f8f382277f2c579f06d561914c000ea6e0
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530981
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
In pmu_handle_pg_elpg_msg, when processing ELPG_MSG_DISALLOW_ACK, if current
pmu state is ELPG_BOOTING and GR_POWER_GATING is not supported, make sure
nvgpu_pmu_state_change updates the state_change flag, since PMU is now fully
initialized. In particular, this fixes PMU boot for dgpu, which does not support
GR_POWER_GATING.
JIRA EVLR-1776
Change-Id: I2feb97b0fb8248e9cb7945ac3189877c21815a4a
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1539102
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
ACCESS_ONCE() is used for making sure that in a given place of code
access a variable exactly once. It prevents compiler rearranging the
read from happening earlier.
Remove its use from cases where rearranging of the read does not
create problems.
Change-Id: I340f375e8fecc31f3a3fab543256069cb4c682dc
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1531649
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
A negative value in the timeout duration does not have any special uses,
so change the duration type to u32 (from just int). Delete some
unnecessary typecasts to int.
Also change MAX_SCHEDULE_TIMEOUT to ULONG_MAX in default gr idle timeout
because the value is in milliseconds instead of scheduling units and to
drop unnecessary Linux dependency.
Change-Id: I5cf6febd4f1cb00c46fe159603436a9ac3b003ac
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master/r/1512565
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- nvgpu_pmu_reset() as pmu reset for
all chips & removed gk20a_pmu_reset() &
gp106_pmu_reset() along with dependent
code.
- Created ops to do PMU engine reset & to
know the engine reset status
- Removed pmu.reset ops & replaced with
nvgpu_flcn_reset(pmu->flcn)
- Moved sec2 reset to sec2_gp106 from
pmu_gp106 & cleaned PMU code part of sec2.
JIRA NVGPU-99
Change-Id: I7575e4ca2b34922d73d171f6a41bfcdc2f40dc96
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master/r/1507881
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
msleep is not recommended for (1ms - 20ms). So use usleep_range
instead to have a more deterministic sleep time.
Also fix the print for target_ref_count that could either be 2 or
1 based on whether GPU rail-gating is enabled or not.
Bug 200294536
Change-Id: I26c9ed8a1badc84db5efa89347a227e6b46f603c
Signed-off-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-on: http://git-master/r/1500409
Reviewed-on: http://git-master/r/1503628
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
When the pmu reaches PMU_STATE_STARTED, exit from the nvgpu_pg_init_task
thread as it's no longer necessary. This prevents a possibly long wait
on the signaling condition, which would make Linux think that the thread
has been blocked and print a warning.
Bug 200317814
Change-Id: I4104896867ee13eb9d53b1b19b659a7839adb73f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1501504
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- moved pg related code to pmu_pg.c under common/pmu folder
PG state machine support methods
PG ACK handlers
AELPG methods
PG enable/disable methods
-prepended with nvgpu_ for elpg/aelpg global methods
by replacing gk20a_
JIRA NVGPU-97
Change-Id: I2148a69ff86b5c5d43c521ff6e241db84afafd82
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1498363
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Moved pmu f/w related support from pmu_gk20a.c
to "drivers/gpu/nvgpu/common/pmu/pmu_fw.c" file
- Prepended with nvgpu_ for global functions & replaced
wherever used
- Moved below list related to PMU f/w
init/remove,
PMU version specific ops,
non-secure ucode blob prepare,
JIRA NVGPU-56
Change-Id: Ifdad8c560bd233e98728717d5868119e9d8e8d90
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1480636
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
- Moved PMU IPC related code to
drivers/gpu/nvgpu/common/pmu/pmu_ipc.c file,
-Below is the list which are moved
seq
mutex
queue
cmd/msg post & process
event handling
NVGPU-56
Change-Id: Ic380faa27de4e5574d5b22500125e86027fd4b5d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: http://git-master/r/1478167
GVS: Gerrit_Virtual_Submit
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
