Add error reporting support for T194's L1SS safety
services for linux.
Used GA10B's LUT for GV11B. The error ids for T194 are
different compared to GA10B. This is handled by creating
a separate table mapping existing error ids to match GV11B.
Ids that are not used by GV11B are set to U32_MAX to indicate
the driver to not send them to the l1ss driver.
Bug 200588528
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I10a267942df77458c3deee0aad1179955490aa74
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2736772
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The high level API for the timer unit is the same across all OSs, so
get rid of the slight code duplication by moving the timer init
functions under a new file in common code:
- nvgpu_timeout_init_cpu_timer
- nvgpu_timeout_init_cpu_timer_sw
- nvgpu_timeout_init_retry
Much of the timer logic is also duplicated, but it is mixed between OS
specific current time retrieval. With some refactoring and addition of
an OS independent time keeping layer, that logic could also be made
shared.
Change-Id: I75d02ceb0d32022b0ba7f3bcd9fdb13d47039dbc
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2669510
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- implemented device info cmd to send device info to the gsp for
runlist submission. Currently GSP scheduler support only GR
engine '0' instance.
- implemented runlist submit cmd. GSP firmware will submit the
corresponding runlist by writing into submit registers. This
command is direct replacement of hw_submit ga10b hal for GR engine.
NVGPU-6790
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I5dc573a6ad698fe20b49a3466a8e50b94cae74df
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2608923
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated gsp unit into three unit:
- GSP unit which holds the core functionality of GSP RISCV core,
bootstrap, interrupt, etc.
- GSP Scheduler to hold the cmd/msg management, IPC, etc.
- GSP Test to hold stress test ucode specific support.
NVGPU-7492
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I12340dc776d610502f28c8574843afc7481c0871
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660619
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CBC contig allocation requires mempool node in DT and the
node can be used for contig allocations. The code duplication
can be avoided by unifying the code from vgpu.
Change-Id: I6eaa1d0c9db47b158602bf0ba68ce4e09cf487a7
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2650459
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add ioctls for creating, removing and querying scheduling domains and
interface with the "nvsched" entity that will be the core scheduler.
Include the scheduler in the Linux build.
The core scheduler code will ultimately hold data on and control what
gets scheduled, but this intermediate layer in nvgpu-rm needs a bit of
bookeeping to manage the userspace interface.
To keep changes isolated, this does not touch the internal runlist
domains yet. The core scheduler logic will eventually control the
runlist domains.
Jira NVGPU-6788
Change-Id: I7b4064edb6205acbac2d8c593dad019d517243ce
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2463625
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When GPU need to programmed with PA(physical address),
given IPA need to be converted to PA by querying Hypervisor.
As this is an IPC between OSes, the call will reduce the
performance badly. So this is adding a IPA-PA cache to improve
the performance. This will be more helpful in passthr config.
Bug 3277194
Change-Id: I6a3230d858977313a0ed0f33068055a3b516330a
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2571814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add REMAP ioctl and accompanying support to the linux nvgpu driver.
REMAP support provides per-page control over sparse VM areas using the
concept of a virtual memory pool.
The REMAP ioctl accepts a list of operations (each a map or unmap) that
modify the VM area pages tracked by the virtual mmemory pool.
Inclusion of REMAP support in the nvgpu build is controlled by the new
CONFIG_NVGPU_REMAP flag. This flag is enabled by default for linux builds.
A new NVGPU_GPU_FLAGS_SUPPORT_REMAP characteristics flag is added for use
in detecting when REMAP support is available.
When a VM allocation tagged with NVGPU_VM_AREA_ALLOC_SPARSE is made the
base virtual memory pool resources are allocated. Per-page resources are
later allocated when the NVGPU_AS_IOCTL_REMAP ioctl is issued. All REMAP
resources are released when the corresponding VM area is freed.
Jira NVGPU-6804
Change-Id: I1f2cdc0c06c1698a62640c1c6fbcb2f9db24a0bc
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2542178
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new Central Interrupt Controller(CIC) unit in common code.
The interrupt handling is done in a distributed manner currently.
The error handling policy for different errors resides in each unit's
ISR code. The goal is to converge this data under one central place -
the CIC unit.
This patch creates framework for CIC unit and moves the gv11b QNX
safety LUT to CIC unit. All the error reporting APIs from different
units are also moved to CIC.
New APIs are exposed by CIC unit to access its internal data like:
1. Struct err_desc - the static err handling /injection data per
error id
2. Num_hw_modules - the number of error reporting HW units
supported by CIC
Init and deinit of CIC unit:
1. CIC unit should be initialized earlyon during boot so that it
is available for any interrupt handling.
2. Initialize CIC just before the interrupts are enabled during
boot.
3. Similarly, CIC is disabled late during deinit cycle; right
after the interrupts are masked.
LUT:
1. LUT is currently used only for reporting error to safety
services in gv11b QNX safety build.
2. This error handling policy LUT currently has only two levels
of handing - correctable and quiecse.
3. Once, the error handling policy decision is moved from leaf
unit nodes to CIC, LUT will be updated to have additional levels
like fast recovery and full recovery.
4. Also, then a separate LUT will be added for each platform/build.
5. In current framework, the LUT is set to NULL for all
configurations except gv11b.
report_err() ops is added to report error to safety services.
This ops is only effective for gv11b qnx build; and set to NULL for
other configurations.
NVGPU-6521
NVGPU-6523
NVGPU-6750
NVGPU-6758
NVGPU-6760
NVGPU-6754
Change-Id: I24be7836a96d787741e37b732e19863ed8014635
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2518683
Reviewed-by: Ajesh K V <akv@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The SDL's error reporting code will be leveraged by central interrupt
controller (CIC) or common.cic unit.
This is a base patch to move SDL error reporting code from QNX
to common. Move the data structures used during error reporting to
common header - nvgpu_err_info.h
JIRA NVGPU-6522
Change-Id: Ie6b209323a14b9bb38e3402c2427fbcdaae52206
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2504726
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a new header file <nvgpu/gr/gr_instances.h> that supports below
macros to execute various functions for GR instances
1) nvgpu_gr_exec_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns void.
2) nvgpu_gr_exec_with_ret_for_each_instance
Execute a function for each GR instance by configuring GR remap
window for that instance. Function being executed returns an error.
3) nvgpu_gr_exec_for_all_instances
Execute a function for all GR instances at once. For this GR remap
window needs to be disabled temporarily.
If CONFIG_NVGPU_MIG is disabled, all above macros will turn into simple
funciton calls.
If CONFIG_NVGPU_MIG is disabled or if runtime flag NVGPU_SUPPORT_MIG is
disabled, all above macros will turn into simple function calls that
configure single GR instance.
Separate out GR engine reset code into new API gr_reset_engine() and
execute it with nvgpu_gr_exec_with_ret_for_each_instance().
PROD values need to be loaded in legacy mode, hence call
nvgpu_cg_init_gr_load_gating_prod() inside
nvgpu_gr_exec_for_all_instances().
Rename gr_init_prepare_hw() to more appropriate
gr_reset_hw_and_load_prod()
Moe gops.gr.init.fifo_access() call to gr_init_reset_enable_hw().
Add new API nvgpu_grmgr_get_gr_syspipe_id() to query GR instance syspipe
id from common.grmgr unit. Add nvgpu_gr_get_syspipe_id() that returns
same value stored in nvgpu_gr struct.
Add cur_gr_instance field to struct nvgpu_gr to track current GR
instance being programmed under remap window.
Jira NVGPU-5648
Change-Id: I86920303427a6e6547ebf195daa37438365bb38e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2403550
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
* Removed unnecessary irqs_enabled flag, and
Replaced enable/disable irq logics with nvgpu variant functions.
* Added nvgpu_interrupts data structure to hold interrupt details.
* Interpret all stall irqs first and followed by nonstall irq from dt.
* Used interrupt size checks for enable/disable irqs instead of
comparing stall and nonstall interrupt lines.
Now adding new stall interrupt lines as easy as just updating macro.
Jira NVGPU-6019
Change-Id: I5a5eaa8d333c68ee87d25d2b45ec244ec8d7b297
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400777
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Continue making the incoherent channel functionality more structured by
moving the worker thread business to one file and the channel watchdog
logic to another. This is channel-internal restructuring; the interface
to other units does not change.
The watchdog logic is called from the worker thread and as such these
are rather tightly coupled but it's possible to have the thread and not
the watchdog.
Jira NVGPU-5582
Change-Id: I70f334dd15c9aca0eed75393b99e2f080d133015
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398921
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The lockless allocator that spins in alloc and free ops using cmpxchg to
mitigate race conditions has only ever been used for the post fences in
preallocated job resources. Now each post fence has a clear owner (the
job struct which already is allocated well) and lifetime, so this
allocator has no longer a purpose. Delete it to avoid bitrot. (The
design of the job queue has always been such that there's minimal
contention in any case.)
Jira NVGPU-5773
Change-Id: Ied98d977c2c75bacfd3d010ce60c80fe709231e0
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2392705
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current PM resource reservation system is limited to HWPM resources
only. And reservation tracking is done using boolean variables.
New upcoming profiler support requires reservation for all the PM
resources like SMPC and PMA stream. Using boolean variables is
not scalable and confusing. Plus the variables have to be replicated
on gpu server in case of virtualization.
Remove flag tracking mechanism and use list based approach to track
all PM reservations. Also, current HALs are defined on debugger object.
Implement new HALs in new pm_reservation object since it is really an
independent functionality.
Add new source file common/profiler/pm_reservation.c which implements
functions to reserve/release resources and to check if any resource
is reserved or not.
Add common/vgpu/pm_reservation_vgpu.c for vGPU which simply forwards
the request to gpu server.
Define new HAL object gops.pm_reservation and assign above functions
to below respective HALs :
g->ops.pm_reservation.acquire()
g->ops.pm_reservation.release()
g->ops.pm_reservation.release_all_per_vmid()
Last HAL above is only used for gpu server cleanup of guest OS.
Add below new common profiler functions that act as APIs to reserve/
release resources for rest of the units in nvgpu.
nvgpu_profiler_pm_resource_reserve()
nvgpu_profiler_pm_resource_release()
Initialize the meta data required for reservtion system in
nvgpu_pm_reservation_init() and call it during nvgpu_finalize_poweron.
Clean up the meta data before releasing struct gk20a.
Delete below HALs :
g->ops.debugger.check_and_set_global_reservation()
g->ops.debugger.check_and_set_context_reservation()
g->ops.debugger.release_profiler_reservation()
Bug 2510974
Jira NVGPU-5360
Change-Id: I4d9f89c58c791b3b2e63099a8a603462e5319222
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367224
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move profiler object allocation/free APIs to separate profiler
specific file common/profiler.c.
Store struct gk20a pointer in struct dbg_profiler_object_data for
convenience of accessing global struct pointer.
Update profiler object to store TSG pointer instead of channel
pointer. Since expectations is to have one profiler object
per context/TSG.
nvgpu_profiler_reserve_acquire() has a case to check if resource
reservation is acquired by some other channel in TSG.
But now since we keep track of TSG itself, this case becomes
redundant and can be removed.
All the support is compiled out of safety build with compile
flag CONFIG_NVGPU_PROFILER.
Linux will always compile the support.
Bug 2510974
Change-Id: I197bbd67a9cdd1fbea42f1effd1b74b15a6068e5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2365674
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Decouple the fence information needed for providing submit postfences to
userspace by adding a separate type for that and using it to pass fence
data to ioctls.
The data in struct nvgpu_fence_type is used in various places:
- job tracking needs to know when a post fence is expired
- job submitters within the driver (vidmem clears) need to be able to
wait for these fences
- userspace needs the fence as an id, value pair or as a file descriptor
created from an os fence
To keep object lifetimes strict, start decoupling the os fence data out
of struct nvgpu_fence_type: delete nvgpu_fence_install_fd() and add
nvgpu_fence_extract_user() to return a struct nvgpu_user_fence that
contains only the necessary information. Storing the os fence in job
tracking metadata is legacy code and not useful. Passing the os fence
from where it's created through the whole submit path inside this
combined fence type has been convenient, though.
The internally stored cde job fence in dmabuf compression metadata is
still nvgpu_fence_type to keep this patch simple.
Jira NVGPU-5248
Change-Id: I75b7da676fb6aa083828f888c55571bbf7645ef3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359064
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a generic profiler based on the channel kickoff profiler. This
aims to provide a mechanism to allow engineers to (more) easily profile
arbitrary software paths within nvgpu.
Usage of this profiler is still primarily through debugfs. Next up is
a generic debugfs interface for this profiler in the Linux code.
The end goal for this is to profile the recovery code and generate
interesting statistics.
JIRA NVGPU-5606
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: I99783ec7e5143855845bde4e98760ff43350456d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355319
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This adds a new device management unit in the common code responsible
for facilitating the parsing of the GPU top device list and providing
that info to other units in nvgpu.
The basic idea is to read this list once from HW and store it in a
set of lists corresponding to each device type (graphics, LCE, etc).
Many of the HALs in top can be deleted and instead implemented using
common code parsing the SW representation.
Every time the driver queries the device list it does so using a
device type and instance ID. This is common code. The HAL is responsible
for populating the device list in such a way that the driver can
query it in a chip agnostic manner.
Also delete some of the unit tests for functions that no longer
exist. This code will require new unit tests in time; those should be
quite simple to write once unit testing is needed.
JIRA NVGPU-5421
Change-Id: Ie41cd255404b90ae0376098a2d6e9f9abdd3f5ea
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319649
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, ltc fs_state is initialized during ltc init support. However,
ltc cbc_param and cbc_param2 registers do not seem to be providing
correct data if ltc.init_fs_state is called before fb.init_fs_state.
- Create fb.init_fb_support hal to initialize fb.
- Trigger init_fb_support before init_ltc_support.
Bug 2969956
Bug 2957808
JIRA NVGPU-4666
Change-Id: I54d697d27b9d9c6318c4ef459d215b6f82cd5571
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2345673
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
