On GV11B, CBC base is calculated in similar fashion than it's
calculated on dGPUs. Thus, remove gv11b_ltc_cbc_fix_config() as it
would incorrectly multiply the CBC base by the LTC count.
Bug 2054860
Change-Id: Iaed717161547468c17e12236149d970c497885b3
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1654506
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add User space API NVGPU_AS_IOCTL_GET_SYNC_RO_MAP to get read-only syncpoint
address map in user space
We already map whole syncpoint shim to each address space with base address
being vm->syncpt_ro_map_gpu_va
This new API exposes this base GPU_VA address of syncpoint map, and unit size
of each syncpoint to user space.
User space can then calculate address of each syncpoint as
syncpoint_address = base_gpu_va + (syncpoint_id * syncpoint_unit_size)
Note that this syncpoint address is read_only, and should be only used for
inserting semaphore acquires.
Adding semaphore release with this address would result in MMU_FAULT
Define new HAL g->ops.fifo.get_sync_ro_map and set this for all GPUs supported
on Xavier SoC
Bug 200327559
Change-Id: Ica0db48fc28fdd0ff2a5eb09574dac843dc5e4fd
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1649365
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The GPU has multiple different operating modes in respect to IOMMU'ability.
As such there needs to be a clean way to tell the driver whether it is
IOMMU'able or not. This state also does not always reflect what is possible:
all becasue the GPU can generate IOMMU'ed memory requests doesn't mean it
wants to.
The nvgpu_iommuable() API has now existed for a little while which is a
useful way to convey whether nvgpu should consider the GPU as IOMMU'able.
However, there is also the g->mm.bypass_smmu flag which used to be able to
override what the GPU decided it should do. Typically it was assigned
the same value as nvgpu_iommuable() but that was not necessarily a
requirment.
This patch removes all the usages of g->mm.bypass_smmu and instead uses the
nvgpu_iommuable() function. All places where the check against
g->mm.bypass_smmu have been replaced with nvgpu_iommuable(). The code
should now be much cleaner.
Subsequently other checks can also be placed in the nvgpu_iommuable()
function. For example, when NVLINK comes online and the GPU should no
longer consider DMA addresses and instead use scatter-gather lists
directly the ngpu_iommuable() function will be able to check the state of
NVLINK and then act accordingly.
Change-Id: I0da6262386de15709decac89d63d3eecfec20cd7
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1648332
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The message to tell RM server to unbind channel has to be sent after
client unbinds the channel and before client calls tsg release. The
channel has to belong to a tsg on RM server before client submit a
runlist to remove the channel. Or there's a bare channel problem.
By moving .tsg_unbind_channl one layer lower, gk20a_tsg_unbind_channel()
will be common functions for all chip, and it'll call tsg release after
call .tsg_unbind_channel. So vgpu won't need to worry about tsg was
released before sending msg to RM server.
Bug 200382695
Bug 200382785
Change-Id: I32acc122f3f9d5d0628049ccf673225f9e90c87a
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1645383
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lots of code paths were split to T19x specific code paths and structs
due to split repository. Now that repositories are merged, fold all of
them back to main code paths and structs and remove the T19x specific
Kconfig flag.
Change-Id: Id0d17a5f0610fc0b49f51ab6664e716dc8b222b6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added sw method support for SET_BES_CROP_DEBUG4.
In this sw method:
CLAMP_FP_BLEND_TO_MAXVAL forces overflow and
CLAMP_FP_BLEND_TO_INF blend results to clamp to FP maxval.
Added support for this sw method in gp10b/gp106/gv11b
and gv100.
Bug 2046636
Change-Id: I3a9e97587aca76718f7f504ea3b853f87409092a
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1641529
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix a race condition where we'd still be booting up the gpu and/or
initializing the driver but elsewhere assume that all is done already.
Some userspace APIs to make sure that we're ready by testing
g->gr.sw_ready, but this flag is set in the middle of bootup; there are
other things after gr initialization. Add a new flag that is enabled
after bootup is fully complete at the end of finalize_poweron, and
change the checks in user API paths to test the new flag only.
These checks are only in the ioctl paths for ctrl, dbg and tsg, and in
the ctrl device's opening path.
The gr.sw_ready flag is still left there to signify whether just gr has
had its bookkeeping initialized.
Bug 200370011
Change-Id: I2995500e06de46430d9b835de1e9d60b3f01744e
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640124
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On gv11b we can have multiple SMs per TPC. Add sm_per_tpc in
vgpu constants to properly dimension the virtual SM to TPC/GPC
mapping in virtualization case.
Use TEGRA_VGPU_CMD_GET_SMS_MAPPING to query current mapping.
Bug 2039676
Change-Id: I817be18f9a28cfb9bd8af207d7d6341a2ec3994b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1631203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove nvgpu internal flag indicating that TSGs are required. We now
require TSGs always. This also fixes a regression where CE channels
were back to using bare channels on gp106.
Bug 1842197
Change-Id: Id359e5a455fb324278636bb8994b583936490ffd
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1628481
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All channels should be wrapped in TSGs so that bare channel support
can be dropped. Bind all CE channels to TSGs.
Bug 1842197
Change-Id: Ia55748d5b53750d860f7764b532ef9eeb6f214b8
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1616693
GR IDLE timeout is defined as Kconfig. Instead of that introduce a
new header file defaults.h which encapsulates any generic defaults
we use in nvgpu, and move the definition there.
Change-Id: I78ff1d2790d7ee3dff6df42bbd11cf683a85bf79
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1612650
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add an alignment check for compressible-kind fixed-address
mappings. If we're using page size smaller than the comptag line
coverage window, the GPU VA and the physical buffer offset must be
aligned in respect to that window.
Bug 1995897
Bug 2011640
Bug 2011668
Change-Id: If68043ee2828d54b9398d77553d10d35cc319236
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1606439
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, configured gfx preemption wfi timeout in usec.
Set timeout unit as usec in gr_gv11b_init_preemption_state.
Used default timeout as 1msec and this timeout value can
be modified through sysfs node:
/sys/devices/gpu.0/gfxp_wfi_timeout_count
For gp10b:
gfxp_wfi_timeout_count is in syclk cycles
For gv11b:
gfxp_wfi_timeout_count is in usec
Bug 2003668
Change-Id: I68d52ce996a83df90b8b3a8164debb07e5cb370f
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
