Add separate unit for perfbuf in common/perf/perfbuf.c which does not need to
include any h/w file. This unit will utilize HALs exported by
perf_*.c units for h/w accesses.
Add corresponding header file at include/nvgpu/perfbuf.h
Add new HAL gops.perfbuf with below operations :
gops.perfbuf.perfbuf_enable()
gops.perfbuf.perfbuf_disable()
Remove below debug session specific HALs
gops.dbg_session_ops.perfbuffer_enable()
gops.dbg_session_ops.perfbuffer_disable()
Delete file gv11b/dbg_gpu_gv11b.c since it is no longer needed now as it was
only including perfbuf sequence
Also remove perfbuf sequences from gk20a/dbg_gpu_gk20a.c
Jira NVGPU-1102
Change-Id: I57b87c9f0dcd85784f8002bc92728b6d78a68d98
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819303
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perf under common/perf/ to provide accesses to h/w
unit hw_perf_*_.c
Implement below HALs in gm20b and gv11b specific h/w files and set them to
appropriate chips
gops.perf.enable_membuf()
gops.perf.disable_membuf()
gops.perf.membuf_reset_streaming()
gops.perf.get_membuf_pending_bytes()
gops.perf.set_membuf_handled_bytes()
gops.perf.get_membuf_overflow_status()
Jira NVGPU-1102
Change-Id: I161990fdb7283f33c0fb2ab6a8051f4bfc3bb181
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gops.fb.dump_vpr_wpr_info() accesses both VPR and WPR registers.
Split this into two different HALs gops.fb.dump_vpr_info() and
gops.fb.dump_wpr_info()
Also unset HALs accessing VPR registers on dGPUs
We don't support VPR on dGPUs
Remove fb_mmu_vpr_info_r() register and all its accessors from
dGPU headers
Bug 2173122
Change-Id: I5b2712f8c5389e422a84c375a7e836add48bfd1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850947
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We don't support big page size beginning Pascal, so set HAL
gops.fb.set_mmu_page_size() to NULL on all those platforms
Also remove these accessors from corresponding platforms
fb_mmu_ctrl_use_pdb_big_page_size_v()
fb_mmu_ctrl_use_pdb_big_page_size_true_f()
fb_mmu_ctrl_use_pdb_big_page_size_false_f()
Bug 2173122
Change-Id: I7353412860a7a6f8a993ca9184a0dc3ca9d749af
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850946
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support for the measure_freq clock op for igpu:
- add nvgpu_clk_measure_freq(), which in turn calls
the get_rate() clock op.
- Initialize the measure_freq clock op to nvgpu_clk_measure_freq()
for native linux and vgpu.
JIRA ESRM-398
Change-Id: I8a3b2ee79e29e3491a16f55281494f05cd841b07
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850585
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_sec2 to hold members
related to SEC2-RTOS ucode support in header file
sec2.h
-Created nvgpu_sec2 variable under struct gk20a.
-Created NVGPU_SUPPORT_SEC2_RTOS enable flag
to enable SEC2 RTOS support.
-Defined method nvgpu_init_sec2_support() to
init SEC2 RTOS support by performing s/w setup like
mutex-init, sequence-init & add support
for remove_support.
-Defined method nvgpu_sec2_destroy() to deinit
SEC2 RTOS support.
-Added nvgpu_init_sec2_support()/nvgpu_sec2_destroy()
as part gk20a_finalize_poweron()/gk20a_prepare_poweroff()
sequence based on NVGPU_SUPPORT_SEC2_RTOS enable flag
-Assigned g->sec2->flcn to point to g->sec2_flcn to access
falcon.
-Made Makefile changes to include sec2.c to build
JIRA NVGPUT-80
Change-Id: Icdc8c25994e305427ad465a5a20e9ce533759a9e
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1791955
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created command/message nv_flcn_cmd/msg_sec2
data struct to communicate between nvgpu<->sec2-rtos
in header file sec2_cmd_if.h
-Created acr command/message nv_sec2_acr_cmd/msg
to perform operation like bootstrap LSF flacon
in header file sec2_if_acr.h
-Created defines common SEC2 defines to use across
multiple operation related to SEC2-RTOS in header file
sec2_if_cmn.h
-Created data struct sec2_init_msg_sec2_init to receive
message from SEC2-RTOS to init queues, debug
data in header file sec2_if_sec2.h
JIRA NVGPUT-81
Change-Id: I4efbca20de7a2483d17de97841ada5336189e2b8
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1827806
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. Implement the following vgpu functions to support clk-arb:
- vgpu_clk_get_range() to return min and max freqs from
supported frequencies
- implement vgpu_clk_get_round_rate() which sets rounded
rate to input rate. Rounding is handled in RM Server
- modify vgpu_clk_get_freqs() to retrieve freq table in IVM
memory instead of copying the value in array as part of cmd
message.
2. Add support for clk-arb related HALs for vgpu.
3. support_clk_freq_controller is assigned true for vgpu
provided guest VM has the privilege to set clock frequency.
Bug 200422845
Bug 2363882
Jira EVLR-3254
Change-Id: I91fc392db381c5db1d52b19d45ec0481fdc27554
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1812379
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses many ways to check if sync points are enabled. The four
ways used to be:
platform->has_syncpoints
g->has_syncpoints
nvgpu_is_enabled(g, NVPGU_HAS_SYNCPOINTS)
gk20a_platform_has_syncpoints()
This patch standardizes all usage to now be nvgpu_has_syncpoints()
which is based on gk20a_platform_has_syncpoints() - just renamed to
be general to nvgpu.
All usage of the other forms have now been consolidated. However,
under the hood nvgpu_has_syncpoints() does check the is_enabled
flag. This flag is now set where g->has_syncpoints used to be set
based on the platform data.
The basic dependency chain is this:
nvgpu_has_syncpoints -> NVGPU_HAS_SYNCPOINTS ->
platform->has_syncpoints
However, note: there are several places where syncpoints can be
disabled if some other driver initialization fails (for ex. host1x).
Also note that nvgpu_has_syncpoints() also considers a disable
variable set by debugfs.
Bug 2327574
Change-Id: Ia2375a80f5f2e27285e6175568dd13e6bb25fd33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803975
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Removed _dmem postfix to some functions which
can be common for DMEM & EMEM queue, and
made changes as needed.
-Defined flcn_queue_push_emem() &
flcn_queue_pop_emem() functions to
to read/write queue data to/from EMEM
-Defined flcn_queue_init_emem_queue()
function to assign EMEM specific functions
to support EMEM queue type.
-Defined QUEUE_TYPE_DMEM to support
DMEM based queue.
-Defined QUEUE_TYPE_EMEM to support
EMEM based queue.
-Modified nvgpu_flcn_queue_init() to call queue
type flcn_queue_init_dmem/emem_queue()
function to assign its ops.
JIRA NVGPU-1161
Change-Id: I06333fa318b7ca4137c977ad63f5a857e7b36cc8
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1841084
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added HAL copy_from_emem & copy_to_emem to struct
nvgpu_falcon_engine_dependency_ops data struct to point to
engine specific EMEM access functions.
-Added function nvgpu_flcn_copy_from_emem() &
nvgpu_flcn_copy_to_emem() at interface layer to
access EMEM using flacon engine EMEM HAL's.
JIRA NVGPU-1161
Change-Id: Ifb72a617277e73f25f1772c969791b642585e7fb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1807336
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.4 only allows the usage of arithmetic operations on
operands of the same essential type category.
Adding "U" at the end of the integer literals to have same type of
operands when an arithmetic operation is performed.
This fixes violation where an arithmetic operation is performed on
signed and unsigned int types.
JIRA NVGPU-992
Change-Id: Ic434301441bf43f9eaff43500afb696e4e1395ae
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819014
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 21.2 doesn't allow the use of macro names which start with
an underscore. These leading underscores are to be removed from the
macro names. This patch will fix such violations in the
include directory by renaming them to follow the convention,
'NVGPU_HEADER_H'.
JIRA NVGPU-1028
Change-Id: I0289a168252595d17ac47c5ed32cabc4eea33e25
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809755
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.4 only allows the usage of arithmetic operations on
operands of the same essential type category.
Adding "U" at the end of the integer literals to have same type of
operands when an arithmetic operation is performed.
This fixes violation where an arithmetic operation is performed on
signed and unsigned int types.
JIRA NVGPU-992
Change-Id: Ic9a911beb6d161df950ca85eb4813547603a8743
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809751
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- TPC powergating should be done before
calling gk20a_enable_gr_hw.
gk20a_enable_gr_hw() issues a GR engine reset.
Without this fix, enabling 1 TPC from each PES
causes ctxsw timeout error while running GFX Benchmark.
- Adds valid tpc-pg mask for 1/2/3/4 active TPC configs.
TPC Config - TPC-MASK
4 TPC configuration - 0x0
3 TPC configuration - 0x1/0x2/0x4/0x8
2 TPC configuration - 0x5/0x9/0x6/0xa
- We should not write to gr_fe_tpc_pesmask_r()
as part of TPC-PG sequence. This register is for
debug purpose only.
Bug 200442360
Change-Id: I6fbe1ad8fbc836ace8cbaf00ec3d21a12c73e0bd
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809772
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All callers for the *get_litter_value() functions were expecting u32,
but the functions were declared to return int's. This is a violation of
MISRA 10.3 which prohibits implicit assignment between essential types
(signed int and unsigned long int, in this case). The litter values
are all u32's anyway.
JIRA NVGPU-647
Change-Id: I853d2abee372488e5d12e355050cbeaf1e53a42c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1830581
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 21.2 doesn't allow the use of macro names which start with
an underscore. These leading underscores are to be removed from the
macro names. This patch will fix such violations in acr by renaming
them to follow the convention, 'NVGPU_PARENT-DIR_HEADER-NAME' when
there is no keyword repetition between file name and directory or
'NVGPU_HEADER-NAME' when there is repetition.
JIRA NVGPU-1028
Change-Id: Iff731ad531a6131afb3c93e27c07f377bbae047b
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817940
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch enables HWPM Mode-E context switch for gv11b.
- Write new pm mode to context buffer header. Ucode use
this mode to enable mode-e context switch. This is Mode-B
context switch of PMs with Mode-E streamout on one context.
If this mode is set, Ucode makes sure that Mode-E pipe
(perfmons, routers, pma) is idle before it context switches PMs.
- This allows us to collect counters in a secure way
(i.e. on context basis) with stream out.
- For Mode-E ctxsw it is required that engine_sel
is set to 0xFFFFFFFF.
- Default 0 is a valid signal and causes problems.
Bug 2106999
Change-Id: Idc6380116a71ffd7ae348ceec68cb395b2eca5f6
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1818070
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch corrects parameters in set_pmm_registers
- As FBP 6 and 7 are floorswept for GV100, GPU_LIT_NUM_FBPS
should not be used
- halify get_num_hwpm_perfmon and set_pmm_register
Bug 2106999
Change-Id: Ib285b25d0c836c93b529dfe4e26c078159a3e6dd
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1785620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move all files under perf/* to pmu_perf/* since pmu_perf is logically
appropriate name for PMU's perf unit
Rename perf.c to pmu_perf.c
Also rename the HAL from gops.perf to gops.pmu_perf
Jira NVGPU-1102
Change-Id: I79e73b8b102ddf6b49783c2f38d861cd43b0b4c6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819301
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Update header path of gk20a.h files present in os/
to <nvgpu/gk20a.h>
2) os_fence_android_sema.c indirectly was dependent on gk20a.h via
semaphore.h. So, added #include <nvgpu/gk20a.h> in
os_fence_android_sema.c and replaced the header with forward
declaration of struct gk20a in semaphore.h
Jira NVGPU-597
Change-Id: I96e23befeb80713f3a399071eb5498f6f580211d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842868
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added code to copy SEC2-RTOS ucode to non-wpr blob
as part of prepare ucode blob.
-Added code to setup & bootstrap GSP, as ACR-ASB needs
ucode to execute on GSP falcon.
-Defined LSF_FALCON_ID_GSPLITE for GSP falcon
-Defined HSBIN_ACR_AHESASC_DBG/PROD_UCODE &
HSBIN_ACR_ASB_DBG/PROD_UCODE to hold names
of ACR AHESASC/ASB ucodes.
-Added defines to hold name of SE2C RTOS ucodes
JIRA NVGPUT-134
Change-Id: I824afed41f785a4ca0fb393bd023db5396c7a399
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1790179
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Defined FALCON_ID_GSPLITE for GSP falcon.
- Created variable gsp_flcn of struct nvgpu_falcon
for GSP falcon & registered to falcon module to access
falcon functions.
- Created HAL file gsp_gv100.c/h for GSP.
- Modified Makefile & Makefile.sources files to include
gsp_gv100 HAL file.
- Enabled GSP falcon support for GV100 by registering
to common falcon module.
- Defined function gv100_gsp_reset() & assigned to
falcon reset as GSP engine reset.
- Updated falcon HAL init code not to return error
if requested falcon is not supported, instead log
the info and return non-error.
JIRA NVGPU-1160
Change-Id: Ice032cf443ae87254375265628b3c022f41544cd
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1804551
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add an interface that the unit test modules can use to
interact with nvgpu IO accessors. This interface is
incredibly simple but not the easiest to use. More simple
wrappers will be added later.
JIRA NVGPU-1040
Change-Id: I325f09a1739a58ea6bcb1c74834037d6977ce0e8
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1741952
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have a h/w bug on some chips and we need to support below additional
HALs to implement a s/w WAR
gops.fifo.init_pdb_cache_war()
gops.fifo.deinit_pdb_cache_war()
gops.fb.apply_pdb_cache_war()
Add new API nvgpu_init_mm_pdb_cache_war() to initialize WAR sequence
and call this from MM initialization and before setting up rest of the
memory management units
Deinitialize WAR while cleaning up MM support
Add pdb_cache_war_mem member to gk20a to hold all the memory needed
for the WAR
Bug 200449545
Change-Id: Id2ac0d940c7881c7b0cf396413273c0f329a1a1f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1834901
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gk20a_ctrl_ioctl_gpu_characteristics() we right now just calculate
GPC mask in s/w and return to user space
But this could give incorrect result as any GPC could be floorswept
in h/w
Add gops.fuse.fuse_status_opt_gpc() to read GPC floorsweep status
from fuse
Add gops.gr.get_gpc_mask() to get actual GPC mask from h/w
Set these HALs only for dGPUs right now. Fuse register to read GPC
mask is not yet supported in simulation and hence simulation boot fails
These HALs will be set for iGPU once simulation issue is resolved
Use gops.gr.get_gpc_mask() if it is defined in
gk20a_ctrl_ioctl_gpu_characteristics() to send the actual GPC mask
to user space
Jira NVGPUT-132
Change-Id: I3b552de07883328fcfa41d4334ec0d777e04bdd3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1822811
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_acr to hold acr module related member
within single struct which are currently spread across multiple structs
like nvgpu_pmu, pmu_ops & gk20a.
-Created struct hs_flcn_bl struct to hold ACR HS bootloader specific members
-Created struct hs_acr to hold ACR ucode specific members like bootloader data
using struct hs_flcn_bl, acr type & falcon info on which ACR ucode need to run.
-Created acr ops under struct nvgpu_acr to perform ACR specific operation,
currently ACR ops were part PMU which caused to have always dependence
on PMU even though ACR was not executing on PMU.
-Added acr_remove_support ops which will be called as part of
gk20a_remove_support() method, earlier acr cleanup was part of
pmu remove_support method.
-Created define for ACR types,
-Ops acr_sw_init() function helps to set ACR properties
statically for chip currently in execution & assign ops to point to
needed functions as per chip.
-Ops acr_sw_init execute at early as nvgpu_init_mm_support calls acr
function to alloc blob space.
-Created ops to fill bootloader descriptor & to patch WPR info to ACR uocde
based on interfaces used to bootstrap ACR ucode.
-Created function gm20b_bootstrap_hs_acr() function which is now common
HAL for all chips to bootstrap ACR, earlier had 3 different function for
gm20b/gp10b, gv11b & for all dgpu based on interface needed.
-Removed duplicate code for falcon engine wherever common falcon code can be used.
-Removed ACR code dependent on PMU & made changes to use from nvgpu_acr.
JIRA NVGPU-1148
Change-Id: I39951d2fc9a0bb7ee6057e0fa06da78045d47590
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813231
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Removed ACR support code from PMU module
- Deleted ACR related ops from pmu ops
- Deleted assigning of ACR related ops
using pmu ops during HAL init
-Removed code related to ACR bootstrap &
dependent code for all chips.
JIRA NVGPU-1147
Change-Id: I47a851a6b67a9aacde863685537c34566f97dc8d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817990
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a/hal.c depends on HAL init functions in all chips. But all chips
also depend on gk20a. That creates a circular dependency. In order to
solve the above, move gpu_init_hal and gk20a_detect_chip to
common/init/hal_init.c. These methods are declared in
include/nvgpu/hal_init.h. Also, the above methods are renamed to
nvgpu_init_hal and nvgpu_detect_chip respectively.
Jira NVGPU-613
Change-Id: Ib0df90287d4491571e4751475739b75fabd1041b
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1827576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Restrict access to devfreq when there are active set requests in the
clk_arbiter. We make the following changes in the patch.
1) Add a global counter in the struct gk20a named clk_arb_global_nr which
is used to track the number of active set requests in the system.
2) Anytime a set request is successfully made by the userspace,
clk_arb_global_nr is incremented by 1 and during the completion of
request(releasing the corresponding file handle), clk_arb_global_nr is
decremented by 1.
3) gk20a_scale_target(invoked by devfreq to set the new frequency based
on load) atomically checks clk_arb_global_nr. If the value = 0, the
code simply continue or else if its > 0, it quits thus making devfreq
requests mutually exclusive with the clk_arbiter.
Bug 2061372
Change-Id: I5d19de03e45520f4ff8fccb97b1f1589d04c8ab8
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1790002
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch constructs clk_arbiter specific code for gp10b as well as
gv11b and does the necessary plumbing in the clk_arbiter code. The
changes made are as follows.
1) Constructed clk_arb_gp10b.* files which add support for clk_arb
related HALS including the nvgpu_clk_arb_init and nvgpu_clk_arb_cb.
This doesn't have support for debugfs nor the VFUpdateEvent yet and
consequently no support for arb->notifications.
2) Added gpcclk specific variables corresponding to every gpc2clk in
a given clk_arb related struct.
3) Linux specific support_clk_freq_controller is assigned true in
platform_gp10b.c and platform_gv11b.c files.
4) Incremented the clk_arb_worker.put atomic variable during
worker_deinit so as to allow the worker thread to be stopped.
5) Added the flag clk_arb_events_supported as part of struct
nvgpu_clk_arb. This flag is used to selectively account for the extra
refcounting present in OS specific code i.e.
nvgpu_clk_arb_commit_request_fd. For igpus, the extra refcount is
reduced during nvgpu_clk_arb_release_completion_dev.
Bug 2061372
Change-Id: Id00acb106db2b46e55aa0324034a16a73723c078
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774281
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Expose the linux specific clock implementations via the HAL
interface to allow nvgpu to use the controls globally. This patch
does the following.
1) Implement a new ops interface and a corresponding linux specific
implementation for allowing nvgpu to iterate through a list of
available clock frequencies via nvgpu_linux_clk_get_f_points().
2) Implement nvgpu_linux_clk_get_range().
Bug 2061372
Change-Id: I7ce9a999dbdcd9fafcc84301af148545f6ca97a9
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774280
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
