We had to force allocation of physically contiguous memory for
USERD in nvlink case, as a channel's USERD address is computed as
an offset from fifo->userd address, and nvlink bypasses SMMU.
With 4096 channels, it can become difficult to allocate 2MB of
physically contiguous sysmem for USERD on a busy system.
PBDMA does not require any sort of packing or contiguous USERD
allocation, as each channel has a direct pointer to that channel's
512B USERD region. When BAR1 is supported we only need the GPU VAs
to be contiguous, to setup the BAR1 inst block.
- Add slab allocator for USERD.
- Slabs are allocated in SYSMEM, using PAGE_SIZE for slab size.
- Contiguous channels share the same page (16 channels per slab).
- ch->userd_mem points to related nvgpu_mem descriptor
- ch->userd_offset is the offset from the beginning of the slab
- Pre-allocate GPU VAs for the whole BAR1
- Add g->ops.mm.bar1_map() method
- gk20a_mm_bar1_map() uses fixed mapping in BAR1 region
- vgpu_mm_bar1_map() passes the offset in TEGRA_VGPU_CMD_MAP_BAR1
- TEGRA_VGPU_CMD_MAP_BAR1 is called for each slab.
Bug 2422486
Bug 200474793
Change-Id: I202699fe55a454c1fc6d969e7b6196a46256d704
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of just the base address of the main register range, store
(also) the base address of usermode area. All regs may not be always
available; on vgpu guests we have only the usermode regs.
Store the usermode addr we get from a platform resource directly in
gv11b_vgpu_probe() for vgpu. In that case the main reg addr is unset.
The base address is computed in gk20a_pm_finalize_poweron() for native
environments; when the reg addr is read from a resource, the chip is
still unknown and as such the HAL op for reading the usermode base
offset is unavailable.
Bug 200145225
Bug 200467197
Change-Id: I8855bb54a6456eb63b69559c84398f7eeaec3513
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1951524
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in OS/Linux interface.
JIRA NVGPU-1036
Change-Id: I39b20f1d0e1a1da56d452f2c3d5ee049666cefe8
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929900
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1. Implement the following vgpu functions to support clk-arb:
- vgpu_clk_get_range() to return min and max freqs from
supported frequencies
- implement vgpu_clk_get_round_rate() which sets rounded
rate to input rate. Rounding is handled in RM Server
- modify vgpu_clk_get_freqs() to retrieve freq table in IVM
memory instead of copying the value in array as part of cmd
message.
2. Add support for clk-arb related HALs for vgpu.
3. support_clk_freq_controller is assigned true for vgpu
provided guest VM has the privilege to set clock frequency.
Bug 200422845
Bug 2363882
Jira EVLR-3254
Change-Id: I91fc392db381c5db1d52b19d45ec0481fdc27554
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1812379
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses many ways to check if sync points are enabled. The four
ways used to be:
platform->has_syncpoints
g->has_syncpoints
nvgpu_is_enabled(g, NVPGU_HAS_SYNCPOINTS)
gk20a_platform_has_syncpoints()
This patch standardizes all usage to now be nvgpu_has_syncpoints()
which is based on gk20a_platform_has_syncpoints() - just renamed to
be general to nvgpu.
All usage of the other forms have now been consolidated. However,
under the hood nvgpu_has_syncpoints() does check the is_enabled
flag. This flag is now set where g->has_syncpoints used to be set
based on the platform data.
The basic dependency chain is this:
nvgpu_has_syncpoints -> NVGPU_HAS_SYNCPOINTS ->
platform->has_syncpoints
However, note: there are several places where syncpoints can be
disabled if some other driver initialization fails (for ex. host1x).
Also note that nvgpu_has_syncpoints() also considers a disable
variable set by debugfs.
Bug 2327574
Change-Id: Ia2375a80f5f2e27285e6175568dd13e6bb25fd33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803975
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Update header path of gk20a.h files present in os/
to <nvgpu/gk20a.h>
2) os_fence_android_sema.c indirectly was dependent on gk20a.h via
semaphore.h. So, added #include <nvgpu/gk20a.h> in
os_fence_android_sema.c and replaced the header with forward
declaration of struct gk20a in semaphore.h
Jira NVGPU-597
Change-Id: I96e23befeb80713f3a399071eb5498f6f580211d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842868
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move OS agnostic parts of vgpu clk code out of os/linux specific
path. This includes implementation sending rpc commands to
RM Server. Move Linux specific vgpu clk code to platform vgpu files
keeping it consistent with native implementation.
Bug 2363882
Jira EVLR-3254
Change-Id: I0aae014ef16415bb356c81e9bfd76bc65206d9fd
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1820674
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Using two separate locks (poweron_lock and poweroff_lock)
allows concurrent gpu power-on and power-off. This shall
not happen as driver won't be able to maintain correct
gpu state.
Use a single power_lock to manage gpu power state. This
lock will be used to manage gpu power state from multiple
triggers like gpu idle, gpu gc-off, etc.
JIRA NVGPU-1100
Change-Id: Ia9b4aeda024a5844ae9f182d453cd6341876680a
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1827812
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove the usage of NVGPU_CTXSW_FILTER_ISSET splattered
across nvgpu, and replace with a MACRO defined in common code.
The usage is still inside Linux, but this helps the
subsequent unification efforts, e.g. to unify the fecs trace
path.
- Remove "uapi/linux/nvgpu.h" from common code.
EVLR-3078
Change-Id: I60b0e1627576a4b255671d58530d8c773ea6154c
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803210
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove the usage of nvgpu_ctxsw_trace_entry splattered
across nvgpu, and replace with a struct defined in common code.
The usage is still inside Linux, but this helps the
subsequent unification efforts, e.g. to unify the fecs trace
path.
- Remove "asm/barrier.h" as "nvgpu/barrier.h" is already
included.
EVLR-3078
Change-Id: Iabfb105b891b0078ed326a8047ef14ebe1888cf2
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803208
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
