Add a fifo HAL for querying the doorbell token of a specific channel and
call it instead of doing the calculation directly. For Volta the token
is just the channel id plus the possible base number.
Bug 200145225
Change-Id: Ifbb150191575fdc72e413a14c799cab7e52d8c14
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1849639
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Different SKUs may require different nvlink speed and hence the
nvlink speed value should come from VBIOS. The initpll number
corresponding to speed is present in VBIOS Low Power Nvlink table
header. Parse this data from VBIOS and set corresponding nvlink
speed and minion initpll DLCMD as default.
We can no longer update the GV100 VBIOS with necessary nvlink speed
value. Hence the hardcoding stays for GV100.
The nvlink speed should match across the endpoints. So in speed_config
fops, communicate the speed to nvlink core-driver for co-ordination
with Tegra endpoint.
Bug 2418403
Change-Id: Ib6f60951d4ca1c275968707d4cc6d738ba3a3f08
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1938046
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-15.6 requires that all if-else blocks and loop blocks
be enclosed in braces, including single statement blocks. Fix errors
due to single statement if-else and loop blocks without braces
by introducing the braces.
JIRA NVGPU-775
Change-Id: Ib70621d39735abae3fd2eb7ccf77f36125e2d7b7
Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1928745
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All the netlist parsing code is currently under GR unit, but netlist
ucode parsing does not really have any logical dependency to GR
Hence separate out a new unit common/netlist/ that parses the netlist
image and stores/exposes its content through netlist_vars structure
Structure nvgpu_netlist_vars is added to structure gk20a
Move netlist parsing code to common/netlist/netlist.c and chip
specific files to common/netlist/netlist_<chip>.c
Move simulation netlist parsing to common/netlist/netlist_sim.c
Rename g.ops.gr_ctx HAL to g.ops.netlist
Rename all the exported structures to be in the form of nvgpu_*
Rename all exported functions to be in the form of nvgpu_netlist_*()
Add netlist initialization to GPU boot path, and add deinitialization
to GPU remove path
Jira NVGPU-1317
Change-Id: I9af86e3b3230a89db5260cc8ed96ff5f72938c9a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1936454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gk20a/gr_ctx_gk20a.c we right now directly read the GR register
gr_fecs_ctx_state_store_major_rev_id_r() which adds the dependency
to GR h/w header
Add a new HAL g.ops.gr.get_fecs_ctx_state_store_major_rev_id() to
read this register and use this instead
Also remove h/w header from gr_ctx_gk20a.c
Jira NVGPU-1317
Change-Id: Iab64fbfacff4d7ce4f3b61ca90b00ddc77e29551
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1936453
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reduce the size of memory allocations in the channel debug dump by
capturing only the necessary values from the instance block. This also
simplifies the allocation path slightly with the downside of having to
add a capture_channel_ram_dump HAL for reading the interesting parts
explicitly beforehand to the now smaller staging buffer.
Also rename struct ch_state to struct nvgpu_channel_dump_info.
Jira NVGPU-886
Change-Id: I5d7518d9d474b0b728b183383bc83d89ecf91b98
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1928207
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
L2 interrupt is processed by first reading from MC which L2 triggered
the interrupt and then calling a function per L2 slice to get the
details. Move the outer loop to MC unit, and the inner loop and L2
accesses to LTC unit.
JIRA NVGPU-954
Change-Id: I69b7bb82e4574b0519cdcd73b94d7d3e3fa6ef9e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1851328
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gk20a/dbg_gpu_gk20a.c to common/debugger.c and make it a
separate common unit
Also rename gk20a/dbg_gpu_gk20a.h to include/nvgpu/debugger.h
We had two different HALs for debugger - gops.debugger and
gops.dbg_session_ops
Combine them into one single HAL gops.debugger and remove
gops.dbg_session_ops
Rename all exported APIs from debugger.h to be in the form of
nvgpu_*()
Jira NVGPU-1013
Change-Id: I136dc7786e3b2065921eb03b99f16049212f3cd2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1920075
Reviewed-by: Sachin Jadhav <sachinj@nvidia.com>
Tested-by: Sachin Jadhav <sachinj@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the integer variables err, ret, status are used
as booleans in the controlling expression of if and loop statements.
JIRA NVGPU-1019
Change-Id: I8c9ad786a741b78293d0ebc4e1c33d4d0fc8f9b4
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1921260
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The PMM type-specific broadcast->unicast expansion calculation
was using incorrect values. This caused the invalid register
accesses to be generated.
This change HAL-ifies the values, so that the expansion will be
performed correctly.
Bug 200454109
Change-Id: I96c15de27b5e16e4db2e788fd98e6bf7d6e7d564
Signed-off-by: Matthew Braun <matthewb@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1919476
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new separate unit common/perf/cyclestats_snapshot.c and add
corresponding header file include/nvgpu/cyclestats_snapshot.h
This unit is h/w independent and simply calls gops.perf.* HALs
exposed by perf unit to do the h/w configurations
Also remove gv11b/css_gr_gv11b.* files as h/w specific sequence
implemented in them is already moved to perf unit
Rename all cyclestats_snapshot HALs in the form nvgpu_css_*()
Jira NVGPU-1103
Change-Id: I303f6becb313ac918e06c495a5fe299947a1f0b1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1916652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perfbuf in common/perf/perfbuf.c which does not need to
include any h/w file. This unit will utilize HALs exported by
perf_*.c units for h/w accesses.
Add corresponding header file at include/nvgpu/perfbuf.h
Add new HAL gops.perfbuf with below operations :
gops.perfbuf.perfbuf_enable()
gops.perfbuf.perfbuf_disable()
Remove below debug session specific HALs
gops.dbg_session_ops.perfbuffer_enable()
gops.dbg_session_ops.perfbuffer_disable()
Delete file gv11b/dbg_gpu_gv11b.c since it is no longer needed now as it was
only including perfbuf sequence
Also remove perfbuf sequences from gk20a/dbg_gpu_gk20a.c
Jira NVGPU-1102
Change-Id: I57b87c9f0dcd85784f8002bc92728b6d78a68d98
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819303
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perf under common/perf/ to provide accesses to h/w
unit hw_perf_*_.c
Implement below HALs in gm20b and gv11b specific h/w files and set them to
appropriate chips
gops.perf.enable_membuf()
gops.perf.disable_membuf()
gops.perf.membuf_reset_streaming()
gops.perf.get_membuf_pending_bytes()
gops.perf.set_membuf_handled_bytes()
gops.perf.get_membuf_overflow_status()
Jira NVGPU-1102
Change-Id: I161990fdb7283f33c0fb2ab6a8051f4bfc3bb181
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gops.fb.dump_vpr_wpr_info() accesses both VPR and WPR registers.
Split this into two different HALs gops.fb.dump_vpr_info() and
gops.fb.dump_wpr_info()
Also unset HALs accessing VPR registers on dGPUs
We don't support VPR on dGPUs
Remove fb_mmu_vpr_info_r() register and all its accessors from
dGPU headers
Bug 2173122
Change-Id: I5b2712f8c5389e422a84c375a7e836add48bfd1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850947
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We don't support big page size beginning Pascal, so set HAL
gops.fb.set_mmu_page_size() to NULL on all those platforms
Also remove these accessors from corresponding platforms
fb_mmu_ctrl_use_pdb_big_page_size_v()
fb_mmu_ctrl_use_pdb_big_page_size_true_f()
fb_mmu_ctrl_use_pdb_big_page_size_false_f()
Bug 2173122
Change-Id: I7353412860a7a6f8a993ca9184a0dc3ca9d749af
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850946
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All chips were currently using gm20b_gr_clear_sm_error_state
It was wrong for chips based on volta and later as the implementation didn't
consider non pes-aware vsms mapping
Add new HAL implementation for clear_sm_error_state for volta based and later
chips to fix this.
Bug 200448172
Change-Id: I65988c8cbb35d13089ac628e8333d9a3b58e0eb1
Signed-off-by: Anup Mahindre <amahindre@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1837188
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses many ways to check if sync points are enabled. The four
ways used to be:
platform->has_syncpoints
g->has_syncpoints
nvgpu_is_enabled(g, NVPGU_HAS_SYNCPOINTS)
gk20a_platform_has_syncpoints()
This patch standardizes all usage to now be nvgpu_has_syncpoints()
which is based on gk20a_platform_has_syncpoints() - just renamed to
be general to nvgpu.
All usage of the other forms have now been consolidated. However,
under the hood nvgpu_has_syncpoints() does check the is_enabled
flag. This flag is now set where g->has_syncpoints used to be set
based on the platform data.
The basic dependency chain is this:
nvgpu_has_syncpoints -> NVGPU_HAS_SYNCPOINTS ->
platform->has_syncpoints
However, note: there are several places where syncpoints can be
disabled if some other driver initialization fails (for ex. host1x).
Also note that nvgpu_has_syncpoints() also considers a disable
variable set by debugfs.
Bug 2327574
Change-Id: Ia2375a80f5f2e27285e6175568dd13e6bb25fd33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803975
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
No one is checking return values for the *get_litter_value()
functions in the 100s of references, and some of the *get_litter_value()
functions were already doing a BUG(), we'll just call BUG() in all them.
And since we don't return in the error case, and there's no guarantee
that an errno won't collide with the litter values, we'll just
initialize the local ret value to 0 to avoid problems and confusion.
JIRA NVGPU-647
Change-Id: Id974c904a142c4b3abf1ab940121c270208b0b83
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1830582
GVS: Gerrit_Virtual_Submit
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All callers for the *get_litter_value() functions were expecting u32,
but the functions were declared to return int's. This is a violation of
MISRA 10.3 which prohibits implicit assignment between essential types
(signed int and unsigned long int, in this case). The litter values
are all u32's anyway.
JIRA NVGPU-647
Change-Id: I853d2abee372488e5d12e355050cbeaf1e53a42c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1830581
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch corrects parameters in set_pmm_registers
- As FBP 6 and 7 are floorswept for GV100, GPU_LIT_NUM_FBPS
should not be used
- halify get_num_hwpm_perfmon and set_pmm_register
Bug 2106999
Change-Id: Ib285b25d0c836c93b529dfe4e26c078159a3e6dd
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1785620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gk20a_ctrl_ioctl_gpu_characteristics() we right now just calculate
GPC mask in s/w and return to user space
But this could give incorrect result as any GPC could be floorswept
in h/w
Add gops.fuse.fuse_status_opt_gpc() to read GPC floorsweep status
from fuse
Add gops.gr.get_gpc_mask() to get actual GPC mask from h/w
Set these HALs only for dGPUs right now. Fuse register to read GPC
mask is not yet supported in simulation and hence simulation boot fails
These HALs will be set for iGPU once simulation issue is resolved
Use gops.gr.get_gpc_mask() if it is defined in
gk20a_ctrl_ioctl_gpu_characteristics() to send the actual GPC mask
to user space
Jira NVGPUT-132
Change-Id: I3b552de07883328fcfa41d4334ec0d777e04bdd3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1822811
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_acr to hold acr module related member
within single struct which are currently spread across multiple structs
like nvgpu_pmu, pmu_ops & gk20a.
-Created struct hs_flcn_bl struct to hold ACR HS bootloader specific members
-Created struct hs_acr to hold ACR ucode specific members like bootloader data
using struct hs_flcn_bl, acr type & falcon info on which ACR ucode need to run.
-Created acr ops under struct nvgpu_acr to perform ACR specific operation,
currently ACR ops were part PMU which caused to have always dependence
on PMU even though ACR was not executing on PMU.
-Added acr_remove_support ops which will be called as part of
gk20a_remove_support() method, earlier acr cleanup was part of
pmu remove_support method.
-Created define for ACR types,
-Ops acr_sw_init() function helps to set ACR properties
statically for chip currently in execution & assign ops to point to
needed functions as per chip.
-Ops acr_sw_init execute at early as nvgpu_init_mm_support calls acr
function to alloc blob space.
-Created ops to fill bootloader descriptor & to patch WPR info to ACR uocde
based on interfaces used to bootstrap ACR ucode.
-Created function gm20b_bootstrap_hs_acr() function which is now common
HAL for all chips to bootstrap ACR, earlier had 3 different function for
gm20b/gp10b, gv11b & for all dgpu based on interface needed.
-Removed duplicate code for falcon engine wherever common falcon code can be used.
-Removed ACR code dependent on PMU & made changes to use from nvgpu_acr.
JIRA NVGPU-1148
Change-Id: I39951d2fc9a0bb7ee6057e0fa06da78045d47590
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813231
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Removed ACR support code from PMU module
- Deleted ACR related ops from pmu ops
- Deleted assigning of ACR related ops
using pmu ops during HAL init
-Removed code related to ACR bootstrap &
dependent code for all chips.
JIRA NVGPU-1147
Change-Id: I47a851a6b67a9aacde863685537c34566f97dc8d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817990
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move implementation of MC HAL to common/mc. Also bump gk20a
implementation to gm20b.
gk20a_mc_boot_0 was used via a HAL, but we have only one possible
implementation. It also has to be anyway called directly to detect
which HALs to assign, so make it a true common function.
mc_gk20a_handle_intr_nonstall was also used only in os/linux/intr.c
so move it there.
JIRA NVGPU-954
Change-Id: I79aedc9158f90d578db0edc17b714617b52690ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813519
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
NVHSCLK registers used by NVLINK IP are part of dev_top
hardware headers. This patch adds "Top" as a separate
unit and exposes HALs to access dev_top registers. The top
unit contains top-level configuration information and any
extra registers or features that do not fit into another block's
feature set.
JIRA NVGPU-1053
JIRA NVGPU-966
Change-Id: Id9a43d4a1c5397959897a242ea97a39a1b95f916
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803632
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below regops HALs are not being called from anywhere, so remove them
gops.regops.get_runcontrol_whitelist_ranges()
gops.regops.get_runcontrol_whitelist_ranges_count()
gops.regops.get_qctl_whitelist_ranges()
gops.regops.get_qctl_whitelist_ranges_count()
HAL gops.regops.apply_smpc_war() is unimplemented for all the chips, and it
was originally only needed for gk20a which is not unsupported
So remove this HAL and its call too
Jira NVGPU-620
Change-Id: Ia2c74883cd647a2e94ee740ffd040a40c442b939
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move debugfs related code of therm from common driver to linux
specific part of the driver. gp106_therm_debugfs_init()
is updated to use nvgpu_os_linux_ops.
This also affects gv100 as gp106_therm_debugfs_init is used
for gv100 as well.
JIRA NVGPU-603
Change-Id: Ia293d14599bc0c91fd1e917b5a430bd8f3d96e56
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797906
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move linux dependencies and CONFIG_DEBUG_FS to linux specific
code from common driver for gp106 clk debugfs. There is no
code change in functions moved from gp106/clk_gp106.c.
It uses nvgpu_os_linux_ops to add gp106 specific clk debugfs
ops. The linux specific part of nvgpu driver uses this op
to initialize gp106 clk debugfs.
As gv100 also uses gp106 clk debugfs ops, set up os ops for
gv100.
JIRA NVGPU-603
Change-Id: Ib55ef051b13366e5907e1d05376bb18bf42c8653
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797904
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
