Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, there are few chip specific erratas present in nvgpu code.
For better traceability of the erratas and corresponding fixes,
introduce flags to indicate existing erratas on a chip. These flags
decide if a corresponding solution is applied to the chip(s).
This patch introduces below functions to handle errata flags:
- nvgpu_init_errata_flags
- nvgpu_set_errata
- nvgpu_is_errata_present
- nvgpu_print_errata_flags
- nvgpu_free_errata_flags
nvgpu_print_errata_flags: print below details of erratas present in chip
1. errata flag name
2. chip where the errata was first discovered
3. short description of the errata
Flags corresponding to erratas present in a chip are set during chip hal
init sequence.
JIRA NVGPU-6510
Change-Id: Id5a8fb627222ac0a585aba071af052950f4de965
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2498095
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- moved reg fields to gk20a
- added os abstract register accessor in nvgpu/io.h
- defined linux register access abstract implementation
- hook up with posix. posix implementation of the register accessor uses
the high 4 bit of address to identify register apertures then call the
according callbacks.
It helps to unify code across OSes.
Bug 2999617
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Change-Id: Ifcb737e4b4d5b1d8bae310ae50b1ce0aa04f750c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2497937
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This is one of the steps in restructuring of interrupt code.
- Move ISR logic to common code. This will allow us to add mixed ASIL
error handling levels.
- Modify nonstall ISR to use threaded interrupts. Bottom half of
nonstall ISR will run nonstall operations instead of adding work to
workqueues.
- Remove nonstall workqueue implementation.
JIRA NVGPU-6351
Change-Id: I5f891b0de4b0c34f6ac05522a5da08dc36221aa6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2467713
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove static class definition and registration for iGPU and dGPU.
Create the class dynamically in gk20a_user_init() and setup the callback
function to create devnode name based on GPU type.
For now add nvgpu_pci_devnode() callback for dGPU that sets correct
dev node path for dGPUs. For iGPU, Android apparently does not honor dev
node path set in callback and hence override the device name for iGPU
with function nvgpu_devnode().
Destroy the class in gk20a_user_deinit().
This will overall be helpful in adding multiple classes and dev nodes
for each GPU instance in MIG mode.
Set GPU device pointer as the parent of new devices created with
device_create(). This is helpful in getting GPU device name in
callback function nvgpu_pci_devnode().
Update functions to not pass class structure and interface names :
nvgpu_probe()
gk20a_user_init()
gk20a_user_deinit()
nvgpu_remove()
Remove static interface name format like INTERFACE_NAME since it is no
longer needed.
Update GK20A_NUM_CDEVS to 10 since there are 10 dev nodes per GPU right
now.
Jira NVGPU-5648
Change-Id: I5d41db5a0f87fa4a558297fb4135a9fbfcd51080
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2423492
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Removed unnecessary irqs_enabled flag, and
Replaced enable/disable irq logics with nvgpu variant functions.
* Added nvgpu_interrupts data structure to hold interrupt details.
* Interpret all stall irqs first and followed by nonstall irq from dt.
* Used interrupt size checks for enable/disable irqs instead of
comparing stall and nonstall interrupt lines.
Now adding new stall interrupt lines as easy as just updating macro.
Jira NVGPU-6019
Change-Id: I5a5eaa8d333c68ee87d25d2b45ec244ec8d7b297
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400777
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.gr unit exports a separate API nvgpu_gr_prepare_sw to
initialize some SW pieces required for nvgpu_gr_enable_hw().
A separate API is really unnecessary since same initialization
can be performed in nvgpu_gr_alloc().
Remove nvgpu_gr_prepare_sw() and HAL gops.gr.gr_prepare_sw().
Initialize falcon and interrupt structures in loop from
nvgpu_gr_alloc().
Move nvgpu_netlist_init_ctx_vars() from nvgpu_gr_prepare_sw() to
common init path since netlist parsing need not be done from
common.gr unit. It just needs to happen before nvgpu_gr_enable_hw().
Also, trigger nvgpu_gr_free() from gr_remove_support() instead
of OS specific paths. Also remove nvgpu_gr_free() calls from
probe error paths since nvgpu_gr_alloc is no longer called in
probe path.
Move interrupt and falcon data structure free calls to nvgpu_gr_free().
Also remove corresponding unit testing code that tests
nvgpu_gr_prepare_sw() specifically.
Update some unit tests to initialize ecc counters and netlist.
Disable some unit tests that fail for reasons unknown.
Jira NVGPU-5648
Change-Id: I82ec8160f76530bc40e0c11a9f26ba1c8f9cf643
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2400166
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, we just deinitialize the nvlink in the shutdown path.
This alone is not sufficient and can lead to someone trying to use
dGPU while being shutdown.
Avoid triggers to dGPU usage by -
1. Set NVGPU_DRIVER_IS_DYING to let users
know that the driver is currently in the process of dying.
2. Disable IRQs
3. Prepare for poweroff using nvgpu_prepare_poweroff
4. Stop CPU from accessing GPU registers
5. Set GPU state to POWEROFF
Bug 200601517
JIRA NVGPU-5991
Change-Id: Ie185516618678bb893bcc3c3dcb514701483ecf2
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2393565
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
struct nvgpu_gr is right now initialized during probe and from OS
specific code. To support multiple instances of graphics engine,
nvgpu needs to initialize nvgpu_gr after number of engine instances
have been enumerated in poweron path.
Hence move nvgpu_gr_alloc() to poweron path and after gr manager has
been initialized.
Some of the members of nvgpu_gr are initialized in probe path and they
too are in OS specific code. Move them to common code in
nvgpu_gr_alloc()
Add field fecs_feature_override_ecc_val to struct gk20a to store the
override flag read from device tree. This flag is later copied to
nvgpu_gr in poweron path.
Update tpc_pg_mask_store() to check for g->gr being NULL before
accessing golden image pointer.
Update tpc_fs_mask_store() to return error if g->gr is not initialized.
This path needs nvgpu_gr struct initialized. Also fix the incorrect
NULL pointer check in tpc_fs_mask_store() which breaks the write path
to this sysfs.
Jira NVGPU-5648
Change-Id: Ifa2f66f3663dc2f7c8891cb03b25e997e148ab06
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2397259
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Historically, nvgpu has supported a struct gk20a_dmabuf_priv and
associated it with a dmabuf instance. This was aided by Nvmap's
dma_buf_set_drv_data() and dma_buf_get_drvdata() APIs. gk20a_dmabuf_priv
is used to store Comptag IDs i.e. (1 per 64 kb) as well as can store the
dmabuf attachments to avoid multiple attach/detach calls. dma_buf_set_drv_data()
allows Nvgpu to associate an instance of struct gk20a_dmabuf_priv with the instance
of the dmabuf and also provide a release callback to delete the
instance when the last reference to the dmabuf is put. Nvmap accomplishes
this by modifying the struct dma_buf_ops definition to include the
set_drv_data and get_drv_data callbacks in the kernel code.
The above approach won't work for upstream Kstable and Nvmap
plans to remove these APIs for upcoming newer downstream kernels as
well.
In order to implement the same functionality without depending on Nvmap,
Nvgpu will implement a release chaining mechanism. Dmabuf's 'ops' pointer
points to a constant struct and hence a whole copy of the ops is made
followed by altering the new copy's release pointer.
struct gk20a_dmabuf_priv stores the new copy and the dmabuf's 'ops' is
changed to point to this. This allows Nvgpu to retrieve
the corresponding gk20a_dmabuf_priv instance using container_of.
Nvgpu's custom release callback will invoke the original release
callback of the dmabuf's producer as a last step, thus completing the
full circle. In case, the driver is removed, Nvgpu restores the
dmabuf's 'ops' back to the original state. In order to accomplish this,
every instance of a struct nvgpu_os_linux maintains a linkedlist of the
gk20a_dma_buf instances. During the driver removal, this linkedlist is
traversed and the corresponding dmabuf's 'ops' pointer is put back to
its original state followed by freeing of this instance.
Nvgpu is a producer of dmabuf's for vidmem and needs
a way to check whether the given dmabuf belongs to itself.
Its no longer reliable to depend on a comparision of
the 'ops' pointer. Instead dmabuf_export_info() allows a name to be set by the
exporter and this can be used to compare with a memory location
that belongs to Nvgpu. Similarly for sysmem dmabufs, Nvmap makes a
similar change in the way it identifies whether a dmabuf belongs to
itself.
Removed NVGPU_DMABUF_HAS_DRVDATA and moved to a unified mechanism for
both downstream as well as upstream kernel.
Some of the other changes in this file include the following.
1) Deletion of dmabuf.c and moving its contents over to dmabuf_priv.c
2) Replacing gk20a_mm_pin_has_drvdata with nvgpu_mm_pin_privdata and
vice-versa for unpin.
Bug 2878569
Change-Id: Icf8e79b05a25ad5a85f478c3ee0fc1eb7747e22d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2341001
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create an iova for syncpoint shim region in case iommu is enabled and
nvlink is disabled. This iova is then used to created nvgpu mem with
nvgpu_mem_create_from_phys. Which is then used to create gpu mappings.
Instead of creating another variable g->syncpt_mem's priv is used to
store the sgt which needs to be freed on deinit.
Jira NVGPU-5376
Change-Id: I0b5a8320fbbb68031912ae88cfe8c2c3804fb813
Signed-off-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2332643
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support in nvgpu to parse and get the freq cap from DT.
The patch does below
Parse the DT and gets the freq cap value during probe.
During clk_arb init compare this with P0.Max and takes the lowest.
Send change_seq with the new value and set dgpu freq.
Use the lowest for "get points","get default","set VF".
Bug 200556366
Change-Id: Ie10243f9bf83cb5ae07ebcc4cdc8efaffa56c309
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204644
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes added to support "rmmod nvgpu" in dgpu simulation after gpu
poweron.
nvgpu_engine-wait_for_idle got stuck in busy mode for nvdec and nvec
engines in simulation as simulation doesnt support timeout.
These engines are not valid engines in nvgpu engine list.
Add nvgpu_engine_check_valid_id before checking engine status.
Simulation crash on accessing 0xb81604 top interrupt register.
Add func_priv_cpu_intr_top__size_1_v() function to get the supported
size than using default MAX_INTR_TOP_REGS.
nvlink is not supprted in dgpu simulation. Avoid warning for
-ENODEV return.
Avoid register read following gpu power off completion.
Bug 2498574
Change-Id: I9f9f1cf1ac4620242bda1d2cc0f29f51f81a6711
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2179930
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added PCIE device info for TU104-QS chip & marked as FUSA SKU
using device flag
-is_fusa_sku flag will be set if device flag has FUSA SKU flag set
& this will be checked in driver to execute functionality
specific to FUSA SKU
JIRA NVGPU-3727
Change-Id: I49ea357133ce0b9bbf52dae72afcf8139ab01346
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2161163
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PG189 has multiple sensors which can provide interrupt when board
temperature reaches programmed threshold.
This Interrupt is implemented in nvgpu and provide events via clk_arb.
Support is enabled for TU104 with NVGPU_SUPPORT_DGPU_THERMAL_ALERT flag.
Board specific config is added in DT which will be parsed by nvgpu.
Nvgpu does the following.
1.Read gpio line number, interrupt type, and event delay from DT.
2.Call kernel methods and register the interrupt with kernel.
3.Create work queue which will process the interrupt in process context.
4.When interrupt occurs disable interrupt, add work to work queue.
5.In work queue post events and sleep for delay time then enable
Interrupt
Bug 2492512
Change-Id: Ic5694fe366ca492f8afe8a67de4350e9a51af2af
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119411
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When flashing OBE ROM on PG189 with an internal chip SKU, it
ends up enumerating with unsupported device id. Since VBIOS
update will be done automatically in PDK, we want to detect
such boards, and throw a warning.
Use upper bits of driver_data to define some flags for pci device.
Added PCI_DEVICE_F_INTERNAL_CHIP_SKU for boards with internal
chip SKUs.
Allow enumeration of PG189 boards with internal chip SKUs
0x1eae and 0x1eaf, but throw a warning.
Bug 2569674
Change-Id: I0261a85139be5e58029f25fcb289f54dfd7c35b3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103831
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to usermode
- fifo.ring_channel_doorbell -> usermode.ring_doorbell
- fifo.doorbell_token -> usermode.doorbell_token
- fifo.usermode_base -> usermode.base
Created the following HAL
- usermode.setup_hw
Jira NVGPU-2978
Change-Id: I856ea24c126fa22d2f3fe860d4b14087c6d7330b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A dGPU can disappear from PCI bus for various reasons. This is
detected while accessing GPU registers and system is rebooted.
If dGPU has disappeared from the system, driver shutdown cannot
access dGPU registers. Skip any such de-initialization (nvlink)
done during shutdown.
Bug 200505461
Change-Id: Ief2e84212421093e57e63ff5958b209bd6857db9
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2093302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compatible VBIOS version for PG189 is .5A, but it must still boot
with VBIOS .18 and higher.
Added a vbios_compatible_version field in platform descriptor.
Do not boot if VBIOS version is < vbios_min_version.
Otherwise, warn if VBIOS version is not vbios_compatible_version.
Bug 2500899
Change-Id: Ib6be2d1da96221def7784c28f362b904ce770231
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079527
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the code involved in nvlink probe sequence into a separate
unit called "nvlink_probe"
nvlink probe code is spread over both the common and OS specific
nvlink files.
Nvlink Probe unit would encompass code needed to initialize the
nvlink software state. Nvlink software initialization involves:
1. Allocate memory for nvlink_device and nvlink_link structs
2. Read the device tree pci node to know about nvlink topology
3. Initialize nvlink function pointers needed by Tegra nvlink
core-driver
4. Register nvlink_device and nvlink_link with the core-driver.
nvlink probe returns -ENODEV when nvlink is not supported.
Nvlink is not supported in two cases:
1. There is no nvlink IP on the Tegra SoC which is denoted by
CONFIG_TEGRA_NVLINK or
2. The pci device tree node does not have "nvidia,nvlink" child
node needed to describe nvlink topology.
Any negative return value other than -ENODEV denotes failure in
execution of nvlink probe.
JIRA NVGPU-1783
Change-Id: I50011b25d88d8cc01569caac7895abe32ee38215
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1994619
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename __nvgpu_set_enabled() to nvgpu_set_enabled(). The original
double underscore was present to indicate that this function is a
function with potentially unintended side effects (enabling a feature
has wide ranging impact).
To not lose this documentation a comment was added to convey that this
function must be used with care.
JIRA NVGPU-1029
Change-Id: I8bfc6fa4c17743f9f8056cb6a7a0f66229ca2583
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989434
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
