Separated set_atomic_mode functionality from
init_fs_state/enable_nvlink and created new
fb gops for set_atomic_mode.
In gpu init sequence, set_atomic_mode is
called after acr_construct_execute to take care
of design changes required for nvgpu-next
architectures.
Updated fb_gv11b_init_test to use set_atomic_mode
gops along with init_fs_state.
Bug 3268664
Change-Id: I1ab9eb21cc4cce77f3325c4e8821a75b6e85fba2
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2508095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The simulator ring buffer DMA interface supports buffers of the following sizes:
4, 8, 12 and 16K. At present, it is configured to 4K and it happens to match
with the kernel PAGE_SIZE, which is used to wrap back the GET/PUT pointers once
4K is reached. However, this is not always true; for instance, take 64K pages.
Hence, replace PAGE_SIZE with SIM_BFR_SIZE.
Introduce macro NVGPU_CPU_PAGE_SIZE which aliases to PAGE_SIZE and replace
latter with former.
Bug 200658101
Jira NVGPU-6018
Change-Id: I83cc62b87291734015c51f3e5a98173549e065de
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2420728
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
IRQs can get triggered during nvgpu power-on due to MMU fault, invalid
PRIV ring or bus access etc. Handlers for those IRQs can't access the
full state related to the IRQ unless nvgpu is fully powered on.
In order to let the IRQ handlers know about the nvgpu power-on state
gk20a.power_on_state variable has to be protected through spinlock
to avoid the deadlock due to usage of earlier power_lock mutex.
Further the IRQs need to be disabled on local CPU while updating the
power state variable hence use spin_lock_irqsave and spin_unlock_-
irqrestore APIs for protecting the access.
JIRA NVGPU-1592
Change-Id: If5d1b5e2617ad90a68faa56ff47f62bb3f0b232b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2203860
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved
-mmu_fault_pending mm ops to is_mmu_fault_pending mc ops
-mmu_fault_pending fb ops to is_mmu_fault_pending fb.intr ops. This
is needed to check if mmu fault intr is pending for volta onwards.
Added
is_mmu_fault_pending fifo ops. This is needed to check if mmu fault
interrupt is pending for chips prior to volta
JIRA NVGPU-1313
Change-Id: Ie8e778387cd486cb19b18c4aee734c581dcd9229
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved fb interrupt handling related code to fb intr sub-unit.
Moved following hals from fb hal to fb intr hal and renamed to:
void (*enable)(struct gk20a *g);
void (*disable)(struct gk20a *g);
void (*isr)(struct gk20a *g);
gk20a_readl/writel are replaced with nvgpu_read/writel.
Hals are populated with new function names and code is modified
to call new hals.
Moved ecc interrupt to gv11b_fb_intr_handle_ecc in a separate file:
fb_intr_ecc_gv11b.c/h
JIRA NVGPU-2034
Change-Id: I80c7110c902c4e082561cf7cbe65c20eb9acb661
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090070
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific mc code from common/mc to hal/mc.
Replace gk20a_readl/writel with nvgpu_readl/writel
Replace 0xFFFFFFFFU with U32_MAX hash define
Change local variable names to fix checkpatch errors/warnings
Change BUG to WARN
Move defines to header files
Create new defines for hard coded delays
JIRA NVGPU-2041
Change-Id: I3594121a81da37ef58c47e87c45e96441e4cf8c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085268
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following ltc related data to struct nvgpu_ltc
and has a reference to it from struct gk20a:
struct nvgpu_spinlock ltc_enabled_lock;
u32 max_ltc_count;
u32 ltc_count;
u32 slices_per_ltc;
u32 cacheline_size;
Added function remove_support for ltc and it is called
during nvgpu remove sequence.
Added following helper functions in ltc.h:
u32 nvgpu_ltc_get_ltc_count(struct gk20a *g);
u32 nvgpu_ltc_get_slices_per_ltc(struct gk20a *g);
u32 nvgpu_ltc_get_cacheline_size(struct gk20a *g);
Removed redudnant ltc.init_fs_state call from vgpu init
sequence since it is getting called from nvgpu_init_ltc_support.
NVGPU-2044
Change-Id: I3c256dc3866f894c38715aa2609e85bd2e5cfe5a
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073417
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
