Changes
1. Remove dGPU flag dependency on calling gsp sw init on tot.
2. Created Enable flag for gsp scheduler to enable them on ga10b
platforms.
3. Engine config flag is only enabled for dGPU enabled platforms, as gsp
is using engine functions it need to be enabled for all gsp sched
enabled builds.
4. Changes in gsp_sequence_init/de_init where on qnx we are seeing
issues.
NVGPU-9297
Change-Id: Ia4bce85ae8fd2794da1553e9ea418c76845a10ac
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2822537
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As part of supporting GPU minimal boot, some of the HALs are assigned
with NULL. Before dereferencing such HALs, check for NULL.
Further, this patch reorganizes needs_init API to first check whether a
function pointer is NULL, to enable quick turnaround to the caller of this API.
JIRA NVGPU-9283
Change-Id: I768d1cddef8766948c99892c59f6ebe6f31be9d8
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2814225
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use CONFIG_KMD_SCHEDULING_WORKER_THREAD instead of
CONFIG_NVS_KMD_BACKEND to remove confusion about the CPU based
KMD scheduling worker thread.
The KMD based scheduling worker thread caters to both Manual Mode
CPU based scheduler as well as Automatic Round Robin CPU based
scheduler.
For the traditional submit path, add correct handling of the
CONFIG_NVS_PRESENT. CPU based worker thread should be part of
CONFIG_NVS_PRESENT. Eventually, when DCONFIG_KMD_SCHEDULING_WORKER_THREAD
is removed, the application must switch to GSP.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0886ef3b2e0124b6fe22c2bf0bf7d1fa98039d00
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2810217
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Mon subelement needs to access GPC TPC configuration registers
to figure out GPC/TPC count post floor sweeping. These registers
are needed as part of intr handling.
Move priv ring init ahead in RM boot to make sure priv ring
enumeration is done before any unit enables it's interrupts.
This ensures that priv ring is enumerated before any interrupt
handler is run to access GPC/TPC count.
JIRA NVGPU-6528
Change-Id: I8aa6ac182e6dd60a79fa76af6813ea70102316f4
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2809442
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Currently, the registeration with error injection utility is done
only for GA10b using HAL. But HALs are not initialized during the
probe stage when we try to register the error injection utility.
So, the callback registration does not happen HAL is set to NULL.
Move the callback registration from probe to poweron stage when HAL
is initialized.
Update the nvgpu_cic_mon_init_lut() API name as it is no longer
doing only LUT initialization.
Bug 3828050
Change-Id: Ide718029e9317124749b4a51c423ae70dc8227c8
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2790269
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Use CONFIG_NVS_KMD_BACKEND to enclose all NVS KMD based scheduling
code.
Current configuration contains all the scheduling code managed within
CONFIG_NVS_PRESENT. Eventually, scheduling code shall only use GSP.
Hence, isolate KMD based scheduling code to a config
CONFIG_NVS_KMD_BACKEND. This shall make it easier to remove this code
later.
Jira NVGPU-8619
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I9dc668e0fa3e7706c111fda7a5e2415e1fc0dd03
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2769465
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In linux threaded interrupts run with a Realtime priority
of 50. This bumps up the priority of bottom-half handlers
over regular kernel/User threads even during process
context.
In the current implementation scheduler thread still
runs in normal kernel thread priority. In order to
allow a seamless scheduling experience, the worker
thread is now created with a Realtime priority of 1.
This allows for the Worker thread to work at a priority
lower than interrupt handlers but higher than the regular
kernel threads.
Linux kernel allows setting priority with the help of
sched_set_fifo() API. Only two modes are supported
i.e. sched_set_fifo() and sched_set_fifo_low().
For more reference, refer to this article
https://lwn.net/Articles/818388/.
Added an implementation of nvgpu_thread_create_priority()
for linux thread using the above two APIs.
Jira NVGPU-860
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I0a5a611bf0e0a5b9bb51354c6ff0a99e42e76e2f
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2751736
Reviewed-by: Prateek Sethi <prsethi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
A previous commit ID 44b6bfbc1 added a hack to prevent
the worker thread from calling nvgpu_runlist_tick()
in post_process if the next domain matches the previous.
This could potentially still face issues with multi-domains
in future.
A better way is to synchronize the thread to suspend/resume
alongwith the device's common OS agnostic suspend/resume
operations. This shall emulate the GSP as well.
This shall also take care of the power constraints
i.e. the worker thread can be expected to always work
with the power enabled and thus we can get rid of the complex
gk20a_busy() lock here for good.
Implemented a state-machine based approach for suspending/
resuming the NVS worker thread from the existing callbacks.
Remove support for NVS worker thread creation for VGPU.
hw_submit method is currently set to NULL for VGPU. VGPU
instead submits its updates via the runlist.reload() method.
Jira NVGPU-8609
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I51a20669e02bf6328dfe5baa122d5bfb75862ea2
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2750403
Reviewed-by: Prateek Sethi <prsethi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit <buildbot_gerritrpt@nvidia.com>
Fix following Coverity Defect:
nvgpu_init.c : Unused value
The ret variable was being reassigned the error code from
nvgpu_cic_mon_deinit(g) without taking into account the previous ret value.
We need to propagate whether there is an error
(the last known error is returned) or not using ret, the temp_ret
variable helps in verifying this.
Similar coding style followed in the entire function.
CID 10127863
Bug 3460991
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: I732ba5269ebbbe68f113e53229df40ae49ccc13c
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2697104
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separated gsp unit into three unit:
- GSP unit which holds the core functionality of GSP RISCV core,
bootstrap, interrupt, etc.
- GSP Scheduler to hold the cmd/msg management, IPC, etc.
- GSP Test to hold stress test ucode specific support.
NVGPU-7492
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I12340dc776d610502f28c8574843afc7481c0871
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2660619
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separate nvgpu_cg_blcg/slcg_fb_ltc_load_enable function
into nvgpu_cg_blcg/slcg_fb_load_enable and
nvgpu_cg_blcg/slcg_ltc_load_enable.
Program fb slcg/blcg prod values during fb init and
program ltc slcg/blcg prod values after acr boot to
have correct privilege for ltc cg programming.
Update unit tests to have sperate blcg/slcg hal for
fb and ltc programming.
Bug 3423549
Change-Id: Icdb45528abe1a3ab68a47f689310dee9a4fe9366
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2646039
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocator (bitmap, buddy, page) debugfs files are not cleaned up when
the allocators are destroyed. This leads to warning logs from nvgpu
like below:
[21073.493000] debugfs: File 'gk20a_as_17' in directory 'allocators' already present!
[21073.493026] debugfs: File 'gk20a_as_17-sys' in directory 'allocators' already present!
Remove the per-allocator debugfs node when destroying an allocator in
runtime.
While at this, add missing nvgpu_allocator locking to the function
nvgpu_bitmap_alloc_destroy. And create nop functions for the
functions nvgpu_init_alloc_debug and nvgpu_fini_alloc_debug
when CONFIG_DEBUG_FS is not defined to avoid adding the
CONFIG checks at multiple places.
Move gk20a_debug_deinit to the end of gk20a_free_cb called in nvgpu_put
as that tears down all debugfs entries. Allocator destroy happens as
part of nvgpu_put call and it can lead to invalid debugfs dentry
access if gk20a_debug_deinit is called before it.
Bug 3481097
Change-Id: I8a66bcf6ade7e5707f9207c78a54d12d7bd94c02
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2648012
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvs worker thread is created on each resume and deinitialized on every
suspend. nvgpu can be resumed when process is getting killed. Thread
creation can fail when the process is getting killed. That will lead
to driver resume failure.
To avoid the issue above, don't stop the nvs worker thread in suspend
and let the first created thread handle the nvs work always.
Deinitialize the nvs worker thread during nvgpu unload.
Also, log the error returned by nvgpu_thread_create in the function
nvgpu_worker_start.
bug 3480192
Change-Id: I8d5d9e7716a950b162cc3c2d9fcfde07c4edfcf6
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2646218
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move away from the prototype call in channel wdt worker and create a
separate worker thread for the domain scheduler. The details of runlist
domains are still encapsulated in the runlist code; the domain scheduler
controls when to switch domains. Switching happens based on domain
timeslices or when the current domain is deleted.
The worker thread is paused on railgate and spun back on poweron. The
scheduler data was also left dangling, so fix that by deinitializing all
nvs-related when gk20a_remove_support() is called. The runlist domains
already get freed as part of fifo removal.
Jira NVGPU-6427
Change-Id: I64f42498f8789448d9becdd209b7878ef0fdb124
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2632579
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The flag pmu->pg->golden_image_initialized is set to
true during initial GPU context creation and is not
cleared while the GPU goes into pm_suspend (during railgate).
Hence, when the GPU resumes after un-railgate it retains
the previous value which can cause ELPG to kick in immediately.
Due to this, when ELPG and Railgating are enabled, IDLE_SNAP
is seen for read access of gr_gpc0_tpc0_sm_arch_r reg.
To resolve this, if golden image is ready set the
pmu->pg->golden_image_initialized to suspend state during railgate,
to delay the early enable of ELPG. Add a new
pmu_init_golden_img_state hal in the NVGPU_INIT_TABLE_ENTRY.
This will be called after all the GR access is done and GPU resumes
completely after un-railgate. This hal will then check if
golden_image_initialized flag is in suspend state, it will set it
to ready state and then re-enable ELPG.
Bug 3431798
Change-Id: I1fee83e66e09b6b78d385bbe60529d0724f79e79
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2639188
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Now that the main nvsched code exists in the nvgpu build, make it
control the runlist domains. As a new nvs domain is created, create the
relevant runlist data too. To support the default domain, create a
default nvs domain at boot.
The scheduling domain code owns the responsibility of domain lifetime,
and runlist domains exist to serve that logic although the RL domains
are directly used by channel and TSG logic. Add refcounting to the
scheduler uapi level to make sure that busy domains (that still have TSG
participants) do not get removed too early.
Adjust error injection sensitive unit tests to match the updated logic.
Jira NVGPU-6425
Jira NVGPU-6427
Change-Id: I1beec97c54c60ad334165b1c0acb5e827c24f2ac
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2632287
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add ioctls for creating, removing and querying scheduling domains and
interface with the "nvsched" entity that will be the core scheduler.
Include the scheduler in the Linux build.
The core scheduler code will ultimately hold data on and control what
gets scheduled, but this intermediate layer in nvgpu-rm needs a bit of
bookeeping to manage the userspace interface.
To keep changes isolated, this does not touch the internal runlist
domains yet. The core scheduler logic will eventually control the
runlist domains.
Jira NVGPU-6788
Change-Id: I7b4064edb6205acbac2d8c593dad019d517243ce
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2463625
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On pre-silicon platform, static pg will be
done by nvgpu driver. For this, retain structs
and HALs of static pg.
- Add the static pg support under pre-silicon code.
- On silicon, the static pg will be done by BPMP.
- Rename variables used in static pg for better
readability and consistency
Bug 200768322
JIRA NVGPU-6433
Change-Id: Ib31c0f83b751c2b1563a36bd51af78a0bd12a117
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2594801
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.fbp has two interfaces to initialize FBP:
1. Public API nvgpu_fbp_init_support
2. HAL fbp.fbp_init_support
nvgpu_fbp_init_support() is only used to initialize HAL
fbp.fbp_init_support. Remove the HAL and use the API directly.
JIRA NVGPU-6644
Change-Id: I2c455e09dbcf5e4fb1dc370b284e4f0d5c678b40
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2592047
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
When GPU need to programmed with PA(physical address),
given IPA need to be converted to PA by querying Hypervisor.
As this is an IPC between OSes, the call will reduce the
performance badly. So this is adding a IPA-PA cache to improve
the performance. This will be more helpful in passthr config.
Bug 3277194
Change-Id: I6a3230d858977313a0ed0f33068055a3b516330a
Signed-off-by: dt <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2571814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Changes:
- This change will only init gsp software
state, nvgpu_gsp_bootstrap need to be called.
- CONFIG_NVGPU_GSP_SCHEDULER flag is created to
compile out the gsp scheduler code when needed.
- Created GSP engine reset which is needed when
ACR completed execution and need to load gsp fw.
NVGPU-6783
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I2ce43e512b01df59443559eab621ed39868ad158
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2554267
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add api to translate dmabuf's fmode_t to gk20a_mem_rw_flag
for read only/read write mapping selection.
By default dmabuf fd mapping permission should be a maximum
access permission associated to a particual dmabuf fd.
Remove bit flag MAP_ACCESS_NO_WRITE and add 2 bit values for
user access requests NVGPU_VM_MAP_ACCESS_DEFAULT|READ_ONLY|
READ_WRITE.
To unify map access type handling in Linux and QNX move the
parameter NVGPU_VM_MAP_ACCESS_* check to common function
nvgpu_vm_map.
Set MAP_ACCESS_TYPE enabled flag in common characteristics
init function as it is supported for Linux and QNX.
Bug 200717195
Bug 3250920
Change-Id: I1a249f7c52bda099390dd4f371b005e1a7cef62f
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507150
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Expose logical mask instead of physical mask when MIG is enabled.
For legacy, NvGpu expose physical mask.
2) Added fb related info in struct nvgpu_gpu_instance().
4) Added utility api to get the logical id for a given local id
nvgpu_grmgr_get_gr_gpc_logical_id()
5) Added grmgr api to get max_gpc_count
nvgpu_grmgr_get_max_gpc_count().
5) Added grmgr's fbp api to get num_fbps and its enable masks.
nvgpu_grmgr_get_num_fbps()
nvgpu_grmgr_get_fbp_en_mask()
nvgpu_grmgr_get_fbp_rop_l2_en_mask()
6) Used grmgr's fbp apis in ioctl_ctrl.c
7) Moved fbp_init_support() in nvgpu_early_init()
8) Added nvgpu_assert handling in grmgr.c
9) Added vgpu hal for get_max_gpc_count().
JIRA NVGPU-5656
Change-Id: I90ac2ad99be608001e7d5d754f6242ad26c70cdb
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2538508
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
