Introduce new HAL gops_ltc.set_l2_sector_promotion to configure L2
sector promotion policy. The follow three promotion settings are support:
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_NONE
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_64B
- NVGPU_GPU_IOCTL_TSG_L2_SECTOR_PROMOTE_FLAG_128B
Add ioctl "NVGPU_TSG_IOCTL_SET_L2_SECTOR_PROMOTION" to the gpu tsg node
to support l2 sector promotion. On chips which do not support sector
promotion, the ioctl returns 0.
Bug 200656177
Change-Id: Iad835a5c954d3b10da436cfafb388aaaa04f44c7
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460553
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This is one of the steps in restructuring of interrupt code.
- Move ISR logic to common code. This will allow us to add mixed ASIL
error handling levels.
- Modify nonstall ISR to use threaded interrupts. Bottom half of
nonstall ISR will run nonstall operations instead of adding work to
workqueues.
- Remove nonstall workqueue implementation.
JIRA NVGPU-6351
Change-Id: I5f891b0de4b0c34f6ac05522a5da08dc36221aa6
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2467713
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new NVGPU_SUPPORT_MAPPING_MODIFY enable flag that is used to
control the value of the exported NVGPU_GPU_FLAGS_SUPPORT_MAPPING_MODIFY
flag.
These flags are currently only enabled on linux in non-virtualized
environments.
Jira NVGPU-6374
Change-Id: Ia85c353b767b4f7d0aebc04838f44996bc38c61f
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2490986
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add ioctl support to configure and read the max number of lines/ways
in a L2 cache set that can be marked as EVICT_LAST. This is accomplished
through two new ltc hals: set_l2_max_ways_evict_last,
get_l2_max_ways_evict_last. These hals will only be set for nvgpu-next
chips. Incase of legacy chips, the IOCTLs will return error -ENOSYS.
Generate following litter constants to get the number of sets in a l2
slice and the number of ways in each set:
- GPU_LIT_NUM_LTC_LTS_SETS
- GPU_LIT_NUM_LTC_LTS_WAYS
Add gpu characteritics flag: NVGPU_L2_MAX_WAYS_EVICT_LAST_ENABLED to
allow userspace driver to determine if L2_MAX_WAYS_EVICT_LAST ioctl is
supported.
Bug 200605474
Change-Id: Id3180f891399f5e128500f3835d762aee59953e0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2445884
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu will move to new V2 device node hierarchy by default to be
consistent with MIG mode hierarchy. As part of this, expose V2 device
node hierarchy with this patch.
Both legacy and V2 hierarchies will co-exist for some duration until
V2 hierarchy is well tested out, and then legacy hierarchy will be
removed.
With V2 hierarchy, below is the directory structure for dev nodes :
igpu: /dev/nvgpu/igpu0/<dev_node>
dgpu: /dev/nvgpu/dgpu-0001\:01\:00.0/<dev_node>
Jira NVGPU-5648
Change-Id: I1c7a1c41e6d59fb248bc98a145c5ecebd06e8bad
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2443712
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
WAR assume 1:1 IPA to PA mapping when hyp_read_ipa_pa_info fails for
the syncpt address which falls into syncpt shim aperture. API
nvgpu_mem_phys_sgl_ipa_to_pa() is taking care of IPA to PA mapping for
the syncpts which makes this WAR invalid.
Patch removes the WAR.
Bug 200673604
Change-Id: I966711e11c2ff1b5b5dd3f5e09674bea66c5d04b
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2478068
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new MAPPING_MODIFY ioctl to the linux nvgpu driver.
This ioctl is used (for example) by the NvRmGpuMappingModify API to
change the kind of an existing mapping.
For compressed mappings the ioctl can be used to do the following:
* switch between two different compressed kinds
* switch between compressed and incompressed kinds
For incompressed mappings the ioctl can be used to do the following:
* switch between two different incompressed kinds
In order to properly update an existing mapping the nvgpu_mapped_buf
structure has been extended to cache the following state when the
mapping is first created:
* the compression tag offset (if applicable)
* the GMMU read/write flags
* the memory aperture
The unused ctag_lines field in the nvgpu_ctag_buffer_info structure
has been replaced with a new ctag_offset field.
Jira NVGPU-6374
Change-Id: I647ab9c2c272e3f9b52f1ccefc5e0de4577c14f1
Signed-off-by: scottl <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2468100
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename struct nvgpu_runlist_info to struct nvgpu_runlist; the
info is not necessary. struct nvgpu_runlist is soon to be a
first class object among the nvgpu object model.
Also rename the fields runlist_info and active_runlist_info to
simply runlists and active_runlists respectively. Again the info
text is just not necessary and somewhat misleading. These structs
_are_ the runlist representations in SW; they are not merely
informational.
Also add an rl_dbg() macro to print debug info specific to
runlist management and some debug prints specifying the runlist
topology for the running chip.
Change-Id: Id9fcbdd1a7227cb5f8c75cca4abbff94fe048e49
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2470303
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The NEXT bit can remain set for the channel if timeslice expires before
scheduler clears it. Due to this nvgpu fails TSG unbind and in turn
nvrm_gpu fails channel close. In this case, checking the channel hw
state after some time can help see NEXT bit cleared by scheduler.
Reenable the tsg and return -EAGAIN to nvrm_gpu for it to retry again.
Bug 3144960
Change-Id: I35f417f02270e371a4e632986b73a00f8a4f921a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2468391
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
For Linux v5.11, commit 6619ccf1bb1d ("dma-buf: Use struct dma_buf_map
in dma_buf_vmap() interfaces") changes to the dma_buf_vmap() and
dma_buf_vunmap() APIs to pass a new parameter of type
'struct dma_buf_map'. Update the NVGPU to support these updated APIs
for Linux v5.11+.
Finally, the legacy dma_buf_vmap() API returns NULL on error and not an
error code and so correct the test of the return value in the function
gk20a_cde_convert().
Bug 200687525
Change-Id: Ie20f101e965fa0f2c650d9b30ff4558ce1256c12
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2469555
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
New profiler APIs set regop type based on whether context is bound or
not in nvgpu_prof_get_regops_staging_data(). But it is possible that
ctxsw is not enabled for some particular HWPM resource even if context
is bound to profiler object.
Fix this by extracting regop type based on per-resource ctxsw flag
instead of bound context.
Add reg_op_type[] array in profiler object to track regop type for each
HWPM resource. Initialize the array based on resource ctxsw flag in
nvgpu_profiler_pm_resource_reserve().
Update profiler_obj_validate_reg_op_offset() to get regop type from
nvgpu_profiler_validate_regops_allowlist() and use this type and
prof->reg_op_type[] to get actual type that should be used for that
regop.
Update validate_reg_ops() to validate the offset first since regop
type is now determined in offset validation. Set ops[i].status to 0
for each validation iteration, and if op is valid set it to
REGOP(STATUS_SUCCESS) at the end of iteration.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ib1f75d840d04d288789473adabda02cdc807eea0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460003
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add gv11b and tu104 HALs to get allowed HWPM resource register ranges,
offsets, and stride meta data.
Add new enum nvgpu_pm_resource_hwpm_register_type for HWPM register
type. Add new struct nvgpu_pm_resource_register_range_map to store all
the register ranges for HWPM resources. Add pointer of map in struct
nvgpu_profiler_object along with map entry count.
Add new API nvgpu_profiler_build_regops_allowlist() to build the regops
allowlist dynamically while binding the resources. Map entry count is
received with get_pm_resource_register_range_map_entry_count() and only
those resource ranges are added for which resource is reserved by
profiler object.
Add nvgpu_profiler_destroy_regops_allowlist() to destroy the allowlist
while unbinding the resources.
Add static functions allowlist_range_search() to search a register
offset in HWPM resource ranges. Add another static function
allowlist_offset_search() to search the offset in per-resource offset
list.
Add nvgpu_profiler_validate_regops_allowlist() that accepts an offset
value, checks if it is in allowed ranges using allowlist_range_search()
and then checks if offset is in allowlist using allowlist_offset_search().
Update gops.regops.exec_regops() to receive profiler object pointer as
a parameter.
Invoke nvgpu_profiler_validate_regops_allowlist() from
validate_reg_ops() if prof pointer is not-null. This will be true only
for new profiler stack and not legacy profilers.
In gr_exec_ctx_ops(), skip regops execution if offset is invalid.
Bug 2510974
Jira NVGPU-5360
Change-Id: I40acb91cc37508629c83106ea15b062250bba473
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2460001
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
With Generic Power Domains (genpd), bpmp driver will manage the GPU
powergating. With the nvgpu idle/unidle flows updated for VPR with
genpd/RPM, the usage of the below tegra bpmp calls can be removed
from nvgpu from railgate APIs for t186 and t194. Note that genpd
is available in k4.14 onwards, so this will work on current
downstream kernel.
tegra_bpmp_running
tegra_powergate_is_powered
tegra_powergate_partition
tegra_unpowergate_partition
Runtime suspended state indicates that the device is railgated.
Update the t186 and t194 is_railgated handlers with this. t210
railgate/unrailgate will be still managed by nvgpu as bpmp
support is not present.
Bug 200602747
JIRA NVGPU-5356
Change-Id: Iadfd794cb51bc41ca927b84fc212ac766d60094d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2376642
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extend the runtime suspend/resume based idle/unidle logic in the
probe case to handling done in gk20a_do_idle/unidle for nvgpu
after the probe completion.
If the railgating is disabled, setting autosuspend_delay to 0 will
enable the suspend. If railgating is enabled, autosuspend delay
will be > 0. Setting it to 0 will enable the immediate suspend.
With this approach based on RPM, forced_reset logic is removed.
force_reset_in_do_idle is also removed as railgating is
supported.
Bug 200602747
JIRA NVGPU-5356
Change-Id: Iaf6d5ab651b8200f0547b45d90f812110cf63c0e
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375941
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
With genpd based runtime PM, the device railgating is managed by the PM
core and the nvgpu manages the clocks. To suspend/resume the device for
idling/unidling while initializing secure alloc, runtime PM is to be
enabled during probe.
nvgpu platform railgate handlers will be only managing the clocks.
During probe, the nvgpu driver poweroff/poweron are not to be
invoked as part of driver runtime suspend/resume hence probe
state is added.
After platform probe initializes the clock, explicit runtime resume of
the device is required to sanely suspend it during gk20a_do_idle.
Runtime PM configuration differs based on the NVGPU_CAN_RAILGATE
capability, hence the runtime PM is enabled ("truly") only for
the duration of nvgpu_probe and then the state is reverted at
the beginning of gk20a_pm_late_init.
Bug 200602747
JIRA NVGPU-5356
Change-Id: I1fbd03d3f49da07ccbee9714387e00ffc688864e
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375939
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
With genpd based runtime PM, the device railgating is managed by the PM
core and the nvgpu manages the clocks. To suspend/resume the device for
idling/unidling while initializing secure alloc, runtime PM will be
enabled before init_secure_alloc.
nvgpu platform railgate handlers will be only managing the clocks. The
clocks and secure alloc initialization was done in platform probe
(applicable to tegra).
To suspend (railgate and clks disable) and resume cleanly during secure
alloc init, the platform probe should happen first that initializes the
clocks. Post that device runtime PM will handle the device idle/unidle
properly.
Hence, move gk20a_tegra_init_secure_alloc to platform late_probe.
Runtime PM changes are introduced in the later patches.
Bug 200602747
JIRA NVGPU-5356
Change-Id: I5130ff43f7b75ddc51cb7096ba6532b3f5397258
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2375938
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In K5.9 those two functions are changed to reject calls directly
using global pmc pointer. So it's a bit complicated to revert to
the point where GPU can feel free to call them.
For an easier future mantainance, a new set of APIs are added to
all existing kernels to let GPU driver control clamp without any
direct access to PMC registers.
Bug 200663781
Change-Id: Ifce4765525eee6d61083896fc9a126892cbb86ba
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2441010
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL covers the following code changes,
1) Added some more documentation for gpu_instance_id
and gr_instance_id.
2) Used the gr_sys_pipe_id for gr_instance_id.
2) Removed gr_syspipe_id attribute.
4) Removed NVGPU_GPU_FLAGS_SUPPORT_MIG flag.
3) Changed the device node name to use gpu instance id + syspipe id
combination insted of gpu instance id + gr engine instance id.
Bug 2802347
Change-Id: Id6ca7db5765ab31b5d83472be35dde432c2281ed
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2440532
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
On Linux, nvrm_gpu can open channel/tsg/address space only using ctrl
node. This tricks nvrm_gpu into considering physical instance as
actual available fGPU if ctrl node is exposed for physical instance.
There is no current requirement to expose physical instance ctrl node.
It might be needed later for profiling use cases.
For now, skip dev node creation for physical instance.
Jira NVGPU-5648
Change-Id: I23398ba993f97e2d2f344876c0c6b0c82b336402
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2439880
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Store nvgpu_cdev pointer in struct tsg_private and assign it in
nvgpu_ioctl_tsg_open.
In gk20a_tsg_ioctl_bind_channel_ex(), extract gpu_instance_id from
cdev pointer and then extract instance specific max VEID count from
gpu_instance_id.
Use this max veid count to validate subcontext id coming from user.
Jira NVGPU-5648
Change-Id: I71cea5180e1ced1a72818d160f1a951c1c6ec770
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2438925
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_channel_get_max_subctx_count() right now always returns max subctx
count for 0th instance. Update this function to return max subctx count
for GPU instance for which channel is allocated.
For CE channels that are allocated and managed by nvgpu, cdev pointer is
not set in channel private data (since it is assigned in OS specific
code). For those channels continue returning max subctx count for 0th
instance. CE channels should not need subcontexts anyways.
Add nvgpu_cdev pointer in struct nvgpu_channel_linux. Assign it in
__gk20a_channel_open() and clear it in gk20a_channel_release()
Move code to get runlist and gpu_instance_id after nvgpu_get() call.
Accesses to gk20a pointer should always come after nvgpu_get().
Also add a debug print to dump runlist_id and gpu_instance_id being
used for channel.
Jira NVGPU-5648
Change-Id: Idf58ccefdb7dc9fec78100f79c647e5a00b8fb29
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2438924
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Separate out nvgpu_gpu_fetch_engine_info_item() that populates
engine_id/engine_instance/runlist_id for given nvgpu_device.
Update Existing API nvgpu_gpu_get_engine_info() to use above function.
Add new API nvgpu_gpu_get_gpu_instance_engine_info() that populates
instance specific engine information.
Update NVGPU_GPU_IOCTL_GET_ENGINE_INFO sequence to trigger
nvgpu_gpu_get_gpu_instance_engine_info() for fGPU instances in
MIG mode. Continue using nvgpu_gpu_get_engine_info() in
non-MIG mode and for physical instance in MIG mode.
Jira NVGPU-5648
Change-Id: Ia946748fa2b0c27efa7704847cdf9bb44a0749da
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2436753
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update gk20a_ctrl_dev_ioctl() to fetch gpu_instance_id with
nvgpu_get_gpu_instance_id_from_cdev() and gr_instance_id with
nvgpu_grmgr_get_gr_instance_id().
Get instance specific GR engine configuration pointer with
nvgpu_gr_get_gpu_instance_config_ptr()
Update gk20a_ctrl_ioctl_gpu_characteristics() to return instance
specific characteristics with below changes :
- 0th GPU instance is a physical instance. Set a limited and relevant
characteristics flags for 0th instance.
For rest of the instances and non-MIG mode, continue fetching flags
with nvgpu_ctrl_ioctl_gpu_characteristics_flags.
- nvgpu_set_preemption_mode_flags() should be set only for non-MIG mode
and non-zero instance in MIG mode.
- In MIG mode, 0th instance does not support any classes. Rest of the
instances support only compute, copy and gpfifo classes.
Non-MIG mode supports all the classes including graphics ones.
- Fetch gpu_instance_id/gr_sys_pipe_id/gr_instance_id from gpu_instance
pointer.
- Fetch max_veid_count_per_tsg from gpu_instance pointer.
Also update nvgpu_gr_get_zcull_ptr() and nvgpu_gr_get_zbc_ptr() to
return instance specific pointers. zcull/zbc are not supported in MIG
mode, this is just for consistency of the code.
Jira NVGPU-5648
Change-Id: I764526061542c48ed87659844e16dd0e0253c588
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2436752
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Modify NVGPU_GPU_IOCTL_ALLOC_AS and struct nvgpu_alloc_as_args to
accept start address and size of user memory. This allows configurable
address space allocation.
- Modify gk20a_as_alloc_share() and gk20a_vm_alloc_share() to receive
va_range_start and va_range_end values.
- gk20a_vm_alloc_share() initializes vm with low_hole = va_range_start,
and user vma size = (va_range_end - va_range_start).
- Modify nvgpu_as_alloc_space_args and nvgpu_as_free_space_args to
accept 64 bit number of pages.
Bug 2043269
JIRA NVGPU-5302
Change-Id: I243995adf5b7e0e84d6b36abe3b35a5ccabd7a37
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2385496
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Sami Kiminki <skiminki@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In __gk20a_channel_open(), if runlist_id is provided as -1,
pick up correct GPU instance sprcific default runlist id using
nvgpu_grmgr_get_gpu_instance_runlist_id().
Also, get GPU instance is using nvgpu_get_gpu_instance_id_from_cdev()
If runlist_id is received as input, check if it is valid for given
GPU instance with nvgpu_grmgr_is_valid_runlist_id()
Jira NVGPU-5648
Change-Id: I69303a3dd81f28f474b40564da51254bcaa1ed15
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2435467
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add new API nvgpu_get_gk20a_from_cdev() that extracts gk20a pointer
from cdev pointer. This helps in keeping cdev related implementation
details in ioctl.c and away from other device ioctl files.
Also move struct nvgpu_cdev, nvgpu_class, and nvgpu_cdev_class_priv_data
from os_linux.h to ioctl.h since all of these structures are more IOCTL
related and better to keep them in ioctl specific header.
Jira NVGPU-5648
Change-Id: Ifad8454fd727ae2389ccf3d1ba492551ef1613ac
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2435466
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
