Create an iova for syncpoint shim region in case iommu is enabled and
nvlink is disabled. This iova is then used to created nvgpu mem with
nvgpu_mem_create_from_phys. Which is then used to create gpu mappings.
Instead of creating another variable g->syncpt_mem's priv is used to
store the sgt which needs to be freed on deinit.
Jira NVGPU-5376
Change-Id: I0b5a8320fbbb68031912ae88cfe8c2c3804fb813
Signed-off-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2332643
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Many tests used various incarnations of the mock register framework.
This was based on a dump of gv11b registers. Tests that greatly
benefitted from having generally sane register values all rely
heavily on this framework.
However, every test essentially did their own thing. This was not
efficient and has caused a some issues in cleaning up the device and
host code.
Therefore introduce a much leaner and simplified register framework.
All unit tests now automatically get a good subset of the gv11b
registers auto-populated. As part of this also populate the HAL with
a nvgpu_detect_chip() call. Many tests can now _probably_ have all
their HAL init (except dummy HAL stuff) deleted. But this does
require a few fixups here and there to set HALs to NULL where tests
expect HALs to be NULL by default.
Where necessary HALs are cleared with a memset to prevent unwanted
code from executing.
Overall, this imposes a far smaller burden on tests to initialize
their environments.
Something to consider for the future, though, is how to handle
supporting multiple chips in the unit test world.
JIRA NVGPU-5422
Change-Id: Icf1a63f728e9c5671ee0fdb726c235ffbd2843e2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335334
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_SUPPORT_COMPRESSION to indicate if compression feature is
supported in nvgpu. If not, set cbc.init, cbc.ctrl and
cbc.alloc_comptags hals to NULL.
Add corresponding GPU characteristics flag and IOCTL mapping to sync
compression support status with nvrm_gpu.
JIRA NVGPU-4666
Change-Id: I2e685688ddac592b3bb918ee70c82ea5524d695a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2338926
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sync file support in Linux has been stabilized and the new config is
called CONFIG_SYNC_FILE. Even if maybe not so intended, both the
stabilized version and the legacy CONFIG_SYNC can coexist; to begin with
supporting the stabilized version, add CONFIG_NVGPU_SYNCFD_ANDROID and
CONFIG_NVGPU_SYNCFD_NONE as choice configs of which one will be set. A
later patch will extend this with a choice for CONFIG_SYNC_FILE.
Jira NVGPU-5353
Change-Id: I67582b68d700b16c46e1cd090f1b938067a364e3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2336118
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Aggressive sync destroy is used on some platforms where the amount of
syncpoints is limited. It can cause sync objects to get allocated and
freed in the submit path and when jobs are cleaned up, so require
deferred cleanup. Allocations do not belong to job tracking in a
deterministic submit path.
Although this has been technically allowed before, deterministic
channels have likely not been a priority on those old platforms with
aggressive sync destroy set.
Update virtualized gp10b platform data to match on a gp10b-vgpu compat
string instead of gk20a-vgpu. gk20a (Tegra T124) hasn't been supported
for a long time. Delete the aggressive sync destroy field from this
platform. It's got enough syncpoints to not dynamically allocate them;
having this property set for gp10b-vgpu has likely been a mistake.
This is not a completely pure cherry-pick: also extend the gpu
characteristics to not advertise full deterministic submit support when
aggressive sync destroy is off. This platform flag cannot be adjusted by
the user unlike many other flags.
Jira NVGPU-4548
Change-Id: I283f546d48b79ac94b943d88e5dce55710858330
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2322042
(cherry picked from commit b1ba2b997b2174e365bcb0782ef3e67260ff9e57)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328411
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, for platforms with canRailgate device characteristics disabled,
suspend can block as deterministic channels hold busy references. This
patch makes the change to first hold off any new jobs for deterministic
channels and then reverts back the busy references taken by those
channels. Following this, suspend also waits for the device to get idle
by waiting (with timeout) for the nvgpu's internal usage counter to be
come zero. This ensures there are no further jobs in progress and
allows the system to go into a suspend state.
Bug 200598228
Bug 2930266
Change-Id: Id02b4d41a9c2dd64303b2e2449dbed48c12aea4c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328489
(cherry picked from commit 9d1e07ca18)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2330159
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable logging and error reporting for MIF, DLPL, and TLC blocks.
Configure the NVLIPT and IOCTRL interrupt registers to rollup
the MIF and TLC errors on the link-specific fatal line and the
DLPL interrupts on link-specific intr_a(fatal) line. Both
link_err_fatal and link_intr_a are rolled up to stall interrupt line.
In the handling ISR, clear the interrupt status registers and print
an error.
Move the interrupt handling HAL code to /common/hal.
JIRA NVGPU-4350
JIRA NVGPU-4351
JIRA NVGPU-5231
JIRA NVGPU-4354
JIRA NVGPU-4355
JIRA NVGPU-4356
Change-Id: I14812499caf506592f3ae84d6681d857730d31ff
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2313221
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
dma_buf_kmap was introduced a decade ago to map a dma_buf partially
by the input number of pages, when 32-bit was fairly common. It was
added to not exhaust vmalloc space. Starting from kernel 5.6, it is
deprecated as vmap calls should succeed with larger available
vmalloc space.
Use dma_buf_vmap/vunmap instead of dma_buf_kmap/kunmap for handling
mapping of notifier memory in gk20a_channel_wait_semaphore.
Also update the debug prints and add speculation barrier to the
start of gk20a_channel_wait.
Bug 2925664
Change-Id: I49078fa81f050a57a5b66a793e62006dd66e3ba3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2326513
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Following commit updated the debug message in the function
nvgpu_vm_find_mapping w.r.t reuse of mapping.
commit 2f00d9adfc4fc91a6b84b14cc513f9b855d39cad
Author: Sagar Kamble <skamble@nvidia.com>
gpu: nvgpu: fix null pointer access in nvgpu_vm_find_mapping
That reuse log is about the mapping and not SGT. Fix the log
and add details about different handling of SGT for dmabuf
drvdata cases in the comment.
Bug 2834141
Change-Id: I3630de1c45a2bf55ff18bdb426f0597efe83f72c
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2328427
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Guard nvgpu_os_fence_syncpt_fdget() with an nvgpu_has_syncpoints()
check. Even when CONFIG_TEGRA_GK20A_NVHOST is set, the platform data bit
can be disabled independently; on Linux we have a runtime flag to
disable them, too. If nvgpu doesn't have syncpt support, don't try
reading syncpt-based sync files.
If a sema-only-backed channel sync is given a syncpoint-based prefence
fd, we can't wait for it with the current design that couples waits and
increments in one interface. This should eventually be fixed, but for
now the extra check at least guards another interesting case.
A sync file with a zero fence count can be trivially accepted as either
a valid syncpoint fence or a sema fence. If only semas are supported,
and the syncpt check that happens first would turn the empty fd into a
syncpt-based sync fence, the sema wait layer would wrongly reject it.
Jira NVGPU-4548
Change-Id: Ib40c2d9a6a25812c5e24eef52c1d1a4f81eeed83
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2325733
(cherry picked from commit 877f99d7c9977dfea14480a1b0488c990b813d1d)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2326044
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvhost_syncpt_read_minval() only reads the min value that nvhost has
cached. It makes sense for host managed syncpoints, but the user
syncpoint that needs set_safe_state is client managed; its min and max
values are not tracked internally. Use nvhost_syncpt_read_ext_check() to
read the actual syncpoint value from HW and set the "safe state" (65536
increments) based on that.
The safe state is analogous to "set min equal to max" when max is
expected to be no more than the current value plus a big number. Using
the cached min value would make this safe state lose its meaning when
there could have been more than the big number of increments since the
syncpoint was allocated.
Jira NVGPU-4548
Change-Id: I395be75f1696e48e344f5503420864efeb3621de
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2323060
(cherry picked from commit ae571178ca63c4fa3e6bf70a4da0221393e975ee)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2326380
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor user managed syncpoints out of the channel sync infrastructure
that deals with jobs submitted via the kernel api. The user syncpt only
needs to expose the id and gpu address of the reserved syncpoint. None
of the rest (fences, priv cmdbufs) is needed for that, so it hasn't been
ideal to couple with the user-allocated syncpts.
With user syncpts now provided by channel_user_syncpt, remove the
user_managed flag from the kernel sync api.
This allows moving all the kernel submit sync code to be conditionally
compiled in only when needed, and separates the user sync functionality
in a more clear way from the rest with a minimal API.
[this is squashed with commit 5111caea601a (gpu: nvgpu: guard user
syncpt with nvhost config) from
https://git-master.nvidia.com/r/c/linux-nvgpu/+/2325009]
Jira NVGPU-4548
Change-Id: I99259fc9cbd30bbd478ed86acffcce12768502d3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2321768
(cherry picked from commit 1095ad353f5f1cf7ca180d0701bc02a607404f5e)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319629
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
If the os fence is the only kind that's supported, fail a submit if the
user wants fences but doesn't explicitly request sync fences, expecting
syncpoints. Syncpoint support is advertised to userspace in the gpu
characteristics, so userspace already has the knowledge to request the
correct sync type.
Do this check at the ioctl level. The in-kernel stuff that needs submits
(cde, copyengine) can work without syncpoints and sync fences are used
only in userspace.
Fail a submit also if CONFIG_SYNC is not set and sync fences are
requested. Lack of kernel support doesn't guarantee that userspace would
still wrongly want that.
Clarify the deferred cleanup requirements. The sync framework is needed
only for post sync fences, but deferred cleanup is still always needed
with semaphores because the internal tracking is done with dynamically
allocated (although small) objects.
Jira NVGPU-4548
Change-Id: I2e5a6554930cb413b2bb46ddfe388e41390bc7e4
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2321715
(cherry picked from commit d870956170906eae1088846ec05266c859669771)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2318157
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.channel.set_syncpt() updates the inst block's allowed syncpt
field for the syncpoint that's allocated for kernelmode submits (if
any). This is different from the userspace-owned syncpoint that is used
with usermode submits, so don't call set_syncpt when creating the user
syncpt.
If the kernel sync object wouldn't exist, the call would even fail. The
allowed syncpt is written during nvgpu_channel_setup_bind() (if usermode
submit isn't requested), after the kernel syncpt is allocated.
Originally, just one syncpoint used to be shared for the kernel and
userspace; now that they're separate, this different path to update the
allowed syncpt would need other modifications to work with the user sync
if one would be used on platforms that care about the allowed syncpt.
Jira NVGPU-4548
Change-Id: If800e704ef8a3289e04c8d75a623affd6779e309
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2320357
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) added support for fuse clock directly from nvgpu linux build for GV11B
and GP10B.
2) added a common function platform_acquire_clock thats used by both
GP10B, GV11B to acquire their respective clocks.
3) remove use of tegra_fuse_clock_enable/disable APIs
The clock parsing code is changed to verify the clock-names obtained
via DT with the static clock-names in the platform code before proceeding
with clk_enable.
Bug 2887230
Change-Id: I177cde9c4bf1a8be6f3437f36e1c6f75cd9c9279
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2307136
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_has_syncpoints is more general than a channel synchronization
related, so move it to nvhost.c from channel_sync.c. Move the
declaration from gk20a.h to nvhost.h.
As the debugfs knob is Linux related, move it from struct gk20a to
struct nvgpu_os_linux.
Jira NVGPU-4548
Change-Id: I4236086744993c3daac042f164de30939c01ee77
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2318814
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add the following changes to build dgpu sources for kernels after 4.14:
1. tegra_alloc_fd is defined by downstream tegra mc driver built with
the flag CONFIG_NV_TEGRA_MC, hence make the nvgpu config
NVGPU_USE_TEGRA_ALLOC_FD dependent on it.
2. dma_buf_ops.map_atomic is removed in kernel version 4.17.
3. gk20a_vidbuf_ops.set_drvdata and .get_drvdata are to be set
under the config CONFIG_NVGPU_DMABUF_HAS_DRVDATA
Bug 2834141
Change-Id: If2351beddfd6f22a1a1da4499cacf6a1880ede76
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2316486
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
