Background:
In Hypervisor mode dGPU device is configured in pass through mode for
the Guest (QNX/Linux). GMMU programming is handled by the guest which
converts a mapped buffer's GVA into SGLes in IPA (Intermediate/Guest
Physical address) which is then translated into PA (Acutual Physical
address) and programs the GMMU PTEes with correct GVA to PA mapping.
Incase of the vgpu this work is delegated to the RM server which takes care
of the GMMU programming and IPA to PA conversion.
Problem:
The current GMMU mapping logic in the guest assumes that PA range is
continuous over a given IPA range. Hence, it doesn't account for holes being
present in the PA range. But this is not the case, a continous IPA range
can be mapped to dis-contiguous PA ranges. In this situation the mapping
logic sets up GMMU PTEes ignoring the holes in physical memory and
creates GVA => PA mapping which intrudes into the PA ranges which are
reserved. This results in memory being corrupted.
This change takes into account holes being present in a given PA range and
for a given IPA range it also identifies the discontiguous PA ranges and
sets up the PTE's appropriately.
Bug 200451447
Jira VQRM-5069
Change-Id: I354d984f6c44482e4576a173fce1e90ab52283ac
Signed-off-by: aalex <aalex@nvidia.com>
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850972
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule-14.4 doesn't allow the usage of function pointers & integer
types as booleans in the controlling expression of an if statement or
an iteration statement.
Fix violations where a function pointer or a function whose return
value is an integer, is used as a boolean in the controlling expression
of if and loop statements.
JIRA NVGPU-1021
Change-Id: Ic5336268394ba4396ce80744c25930d2fb44dc42
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932147
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the integer variables err, ret, status are used
as booleans in the controlling expression of if and loop statements.
JIRA NVGPU-1019
Change-Id: Ia2ec5f1db3c7a1884efe5ba7b8b4d9ebbd021734
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1921373
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
L2 interrupt is processed by first reading from MC which L2 triggered
the interrupt and then calling a function per L2 slice to get the
details. Move the outer loop to MC unit, and the inner loop and L2
accesses to LTC unit.
JIRA NVGPU-954
Change-Id: I69b7bb82e4574b0519cdcd73b94d7d3e3fa6ef9e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1851328
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gk20a/dbg_gpu_gk20a.c to common/debugger.c and make it a
separate common unit
Also rename gk20a/dbg_gpu_gk20a.h to include/nvgpu/debugger.h
We had two different HALs for debugger - gops.debugger and
gops.dbg_session_ops
Combine them into one single HAL gops.debugger and remove
gops.dbg_session_ops
Rename all exported APIs from debugger.h to be in the form of
nvgpu_*()
Jira NVGPU-1013
Change-Id: I136dc7786e3b2065921eb03b99f16049212f3cd2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1920075
Reviewed-by: Sachin Jadhav <sachinj@nvidia.com>
Tested-by: Sachin Jadhav <sachinj@nvidia.com>
Address MISRA Rule 20.7 violation: Macro parameter expands into an
expression without being wrapped by parentheses.
Some of the exception the coverity is not able to catch are:
1. Macro parameters passed as parameter to another macro.
i.e NVGPU_ACCESS_ONCE. Fixing these by additional parantheses.
2. Macro parameter used as type. i.e. type parameter in container_of.
While at it, update copyright date rage for list.h and types.h.
JIRA NVGPU-841
Change-Id: I4b793981d671069289720e8c041bad8125961c0c
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929823
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The GV100 PMU ucode needs to be updated to add support
for PS3.5 Clock Programming boardobj.
The entrysize in GV100 PMU ucode is increased to match
that on Turing R400 PMU ucode.
JIRA NVGPU-1153
Change-Id: Ied3163522bf4e124849517e90bfa42fe4b320a96
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1918174
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fixed timeout checking flow in sync-unmap where timeout message could
be printed while there is not a timeout.
The original codeflow doesn't check refcount of a mapped_buffer again
after 10ms waiting. So if the buffer is released during the last
round of waiting, the timeout message will still be printed. The new
codeflow combines refcount and timeout checking. So that there won't
be an inconsistency between the two.
Bug 200434475
Change-Id: Id0a0aebcb24906a1ec7113e669227788e729564b
Signed-off-by: Kyle Guo <kyleg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1930236
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For a long time now, the ALLOC_GPFIFO_EX channel IOCTL has done much
more than just gpfifo allocation, and its signature does not match
support that's needed soon. Add a new one called SETUP_BIND to hopefully
cover our future needs and deprecate ALLOC_GPFIFO_EX.
Change nvgpu internals to match this new naming as well.
Bug 200145225
Change-Id: I766f9283a064e140656f6004b2b766db70bd6cad
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1835186
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
If the total size of SGLs is lower than the size to copy,
we will reach the end of the list so the sgl var will become NULL,
and calling nvgpu_sgt_get_length will cause a null pointer dereference.
This change will cause a BUG() which should be clearer than a NULL
pointer dereference. There is no easy way to add more advanced error
checking and handling, and an SGL bug would most likely be linked to
another bug in the OS or OS layer.
JIRA NVGPU-1279
Change-Id: Ide83f2b91ecae25f3a0f3202febfb115110315d7
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1923706
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the wait_cmd_buffer programming for channel_sync->wait_fd to
channel_sync.c. nvgpu_os_fence->program_waits
interface is now removed. channel_sync can directly retrieve
syncpt/semaphore from the interfaces of struct nvgpu_os_fence_syncpt
and struct nvgpu_os_fence_sema and use it for the wait programming.
Also, change int to u32 for some variables such as num_fences,
max_wait_size and wait_cmd_size.
Jira NVGPU-1093
Change-Id: I19c1b10d676caff49ce57861091f7f0ea65e7676
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1829719
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current gating reglist includes both unicast and broadcast registers
Having unicast registers is unnecessary since corresponding broadcast
registers are already being written
Also some of the unicast registers were manually commented out in
auto generated file to avoid PRI timeouts
Re-generate gating reglist with new script which skips unicast
registers so that we don't have to manually update auto generated
file
Bug 2150883
Change-Id: I0b099d23049d8c7154a9b1fb709dd9e6709cdf38
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1922579
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct gk20a from gk20a.h needs defination of struct gk20a_ce_app
and ce2_gk20a.h needs defination of struct gk20a. This creates
a circular dependency.
Fix this by making gk20a_ce_app a pointer to skip knowing the
complete type details and using forward declarations for struct
gk20a_ce_app and struct gk20a.
The gk20a_ce_app pointer is alloc'ed in gk20a_init_ce_support()
and free'ed in gk20a_ce_destroy.
JIRA NVGPU-611
Change-Id: I4d62d5f2b2d1492db73bae69f90a1fe5586fba76
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1917945
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new separate unit common/perf/cyclestats_snapshot.c and add
corresponding header file include/nvgpu/cyclestats_snapshot.h
This unit is h/w independent and simply calls gops.perf.* HALs
exposed by perf unit to do the h/w configurations
Also remove gv11b/css_gr_gv11b.* files as h/w specific sequence
implemented in them is already moved to perf unit
Rename all cyclestats_snapshot HALs in the form nvgpu_css_*()
Jira NVGPU-1103
Change-Id: I303f6becb313ac918e06c495a5fe299947a1f0b1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1916652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves the increment and decrement of the user mapped
buffer count to the insert/remove mapped buffer functions since
this value should only ever change when these functions are called.
Bug 200105199
Change-Id: I5b0a86d00e9e948c48e313153a668eb2e10fca49
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1917791
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add Turing specific common, unit, hardware header files
Make all the Makefile and Makefile.sources changes to compile
all Turing specific code
Bug 200454999
Change-Id: I62ebff5c078b4b8817fc83ea0e4ee3cfffe668dc
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1917983
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
-Call secured_sec2_start() to start SEC2 RTOS ucode execution
on SEC2 falcon in nvgpu_init_sec2_support() function
-Modified nvgpu_init_pmu_support() to do PMU bootstrap
from SEC2 RTOS by sending command.
-Added function nvgpu_sec2_bootstrap_ls_falcons() to
bootstrap LS falcon by taking falcon id as a parameter &
sending request to SEC2 RTOS with command
NV_SEC2_ACR_CMD_ID_BOOTSTRAP_FALCON.
-Modified method gr_gm20b_load_ctxsw_ucode() to
bootstrap FECS & GPCCS falcons using SEC2 RTOS
in cold boot & recovery path.
-Updated ldr_cfg parameters for SEC2 falcon
-Skip adding PMU ucode details to non-wpr blob preparation
to skip supporting of LS PMU falcon bootstrap.
JIRA NVGPUT-85
Change-Id: I5f6828e2737e247767814014801671327bb34a4e
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1832363
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created sec2_ipc.c to support SEC2 IPC.
-Defined nvgpu_sec2_cmd_post() to send command
to SEC2 RTOS from nvgpu along with dependent
methods like seq acquire/release, validate &
write cmd.
-Defined nvgpu_sec2_process_message() to
process message from SEC2 RTOS & route
to correct handler based on flag.
-Method sec2_process_init_msg() helps fetch
parameters sent from SEC2 RTOS to setup
queue, debug buffer as parameters.
-Created sec2 ops under gops to access
sec2 engine specific HALs.
-Defined nvgpu_sec2_queue_init() init
command & message for SEC2 RTOS using
common falcon queue.
-Made Makefile changes to include sec2_ipc.c for build
JIRA NVGPUT-82
Change-Id: I6e4c2d6ec71aa61a543f34680d1412167c9a8cc6
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1828034
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perfbuf in common/perf/perfbuf.c which does not need to
include any h/w file. This unit will utilize HALs exported by
perf_*.c units for h/w accesses.
Add corresponding header file at include/nvgpu/perfbuf.h
Add new HAL gops.perfbuf with below operations :
gops.perfbuf.perfbuf_enable()
gops.perfbuf.perfbuf_disable()
Remove below debug session specific HALs
gops.dbg_session_ops.perfbuffer_enable()
gops.dbg_session_ops.perfbuffer_disable()
Delete file gv11b/dbg_gpu_gv11b.c since it is no longer needed now as it was
only including perfbuf sequence
Also remove perfbuf sequences from gk20a/dbg_gpu_gk20a.c
Jira NVGPU-1102
Change-Id: I57b87c9f0dcd85784f8002bc92728b6d78a68d98
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819303
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perf under common/perf/ to provide accesses to h/w
unit hw_perf_*_.c
Implement below HALs in gm20b and gv11b specific h/w files and set them to
appropriate chips
gops.perf.enable_membuf()
gops.perf.disable_membuf()
gops.perf.membuf_reset_streaming()
gops.perf.get_membuf_pending_bytes()
gops.perf.set_membuf_handled_bytes()
gops.perf.get_membuf_overflow_status()
Jira NVGPU-1102
Change-Id: I161990fdb7283f33c0fb2ab6a8051f4bfc3bb181
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819302
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gops.fb.dump_vpr_wpr_info() accesses both VPR and WPR registers.
Split this into two different HALs gops.fb.dump_vpr_info() and
gops.fb.dump_wpr_info()
Also unset HALs accessing VPR registers on dGPUs
We don't support VPR on dGPUs
Remove fb_mmu_vpr_info_r() register and all its accessors from
dGPU headers
Bug 2173122
Change-Id: I5b2712f8c5389e422a84c375a7e836add48bfd1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850947
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU ucode is updated to use acrlib from t19xbringup
branch.
We are seeing build issues due to incompatibility
with acrlib from tegra_acr branch.
CTX_DMA aperture to be used for loading LS falcons
needed update in the local acrlib.
Bug 2400729.
Change-Id: Iad00a332acfac307c389bde504893a87abaf7460
Signed-off-by: Deepak <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1849182
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created struct nvgpu_sec2 to hold members
related to SEC2-RTOS ucode support in header file
sec2.h
-Created nvgpu_sec2 variable under struct gk20a.
-Created NVGPU_SUPPORT_SEC2_RTOS enable flag
to enable SEC2 RTOS support.
-Defined method nvgpu_init_sec2_support() to
init SEC2 RTOS support by performing s/w setup like
mutex-init, sequence-init & add support
for remove_support.
-Defined method nvgpu_sec2_destroy() to deinit
SEC2 RTOS support.
-Added nvgpu_init_sec2_support()/nvgpu_sec2_destroy()
as part gk20a_finalize_poweron()/gk20a_prepare_poweroff()
sequence based on NVGPU_SUPPORT_SEC2_RTOS enable flag
-Assigned g->sec2->flcn to point to g->sec2_flcn to access
falcon.
-Made Makefile changes to include sec2.c to build
JIRA NVGPUT-80
Change-Id: Icdc8c25994e305427ad465a5a20e9ce533759a9e
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1791955
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses many ways to check if sync points are enabled. The four
ways used to be:
platform->has_syncpoints
g->has_syncpoints
nvgpu_is_enabled(g, NVPGU_HAS_SYNCPOINTS)
gk20a_platform_has_syncpoints()
This patch standardizes all usage to now be nvgpu_has_syncpoints()
which is based on gk20a_platform_has_syncpoints() - just renamed to
be general to nvgpu.
All usage of the other forms have now been consolidated. However,
under the hood nvgpu_has_syncpoints() does check the is_enabled
flag. This flag is now set where g->has_syncpoints used to be set
based on the platform data.
The basic dependency chain is this:
nvgpu_has_syncpoints -> NVGPU_HAS_SYNCPOINTS ->
platform->has_syncpoints
However, note: there are several places where syncpoints can be
disabled if some other driver initialization fails (for ex. host1x).
Also note that nvgpu_has_syncpoints() also considers a disable
variable set by debugfs.
Bug 2327574
Change-Id: Ia2375a80f5f2e27285e6175568dd13e6bb25fd33
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1803975
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Removed _dmem postfix to some functions which
can be common for DMEM & EMEM queue, and
made changes as needed.
-Defined flcn_queue_push_emem() &
flcn_queue_pop_emem() functions to
to read/write queue data to/from EMEM
-Defined flcn_queue_init_emem_queue()
function to assign EMEM specific functions
to support EMEM queue type.
-Defined QUEUE_TYPE_DMEM to support
DMEM based queue.
-Defined QUEUE_TYPE_EMEM to support
EMEM based queue.
-Modified nvgpu_flcn_queue_init() to call queue
type flcn_queue_init_dmem/emem_queue()
function to assign its ops.
JIRA NVGPU-1161
Change-Id: I06333fa318b7ca4137c977ad63f5a857e7b36cc8
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1841084
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Added HAL copy_from_emem & copy_to_emem to struct
nvgpu_falcon_engine_dependency_ops data struct to point to
engine specific EMEM access functions.
-Added function nvgpu_flcn_copy_from_emem() &
nvgpu_flcn_copy_to_emem() at interface layer to
access EMEM using flacon engine EMEM HAL's.
JIRA NVGPU-1161
Change-Id: Ifb72a617277e73f25f1772c969791b642585e7fb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1807336
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Input paran VM Will be used to get PTE size for GVA spaces and it can be
NULL if buddy_allocator initialization is not for GVA space. As part of
recent changes VM was being accessed for non GVA space case and for that
VM was NULL, causing the crash.
In this fix added a prior check and VM will be accessed only if input
flag is set to GPU_ALLOC_GVA_SPACE.
Bug 200452730
Change-Id: I9dcb1f2bd5e639c37a7152b99453bb5b46fe4087
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842530
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Tested-by: Prateek Sethi <prsethi@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Move all files under perf/* to pmu_perf/* since pmu_perf is logically
appropriate name for PMU's perf unit
Rename perf.c to pmu_perf.c
Also rename the HAL from gops.perf to gops.pmu_perf
Jira NVGPU-1102
Change-Id: I79e73b8b102ddf6b49783c2f38d861cd43b0b4c6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819301
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 21.2 doesn't allow the use of macro names which start with
an underscore. These leading underscores are to be removed from the
macro names. This patch will fix such violations in common directory
by renaming them to follow the convention,
'NVGPU_PARENT-DIR_HEADER-NAME' when there is no keyword repetition
between file name and directory or 'NVGPU_HEADER-NAME' when there
is repetition.
JIRA NVGPU-1028
Change-Id: Idf10f6b179cfd96bfb8ab8e9e2bf79c26591905d
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809086
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Defined FALCON_ID_GSPLITE for GSP falcon.
- Created variable gsp_flcn of struct nvgpu_falcon
for GSP falcon & registered to falcon module to access
falcon functions.
- Created HAL file gsp_gv100.c/h for GSP.
- Modified Makefile & Makefile.sources files to include
gsp_gv100 HAL file.
- Enabled GSP falcon support for GV100 by registering
to common falcon module.
- Defined function gv100_gsp_reset() & assigned to
falcon reset as GSP engine reset.
- Updated falcon HAL init code not to return error
if requested falcon is not supported, instead log
the info and return non-error.
JIRA NVGPU-1160
Change-Id: Ice032cf443ae87254375265628b3c022f41544cd
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1804551
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
