Add new HAL unit common.hal.gr.init with below source files
hal/gr/init/gr_init_gm20b.c
hal/gr/init/gr_init_gm20b.h
In gr_gk20a_init_golden_ctx_image() we force FE power mode on and also
disable it. Extract out this sequence into new unit and expose new HAL
operation that takes a boolean flag to enable/disable power mode
g->ops.gr.init.fe_pwr_mode_force_on()
Use new HAL operation in gr_gk20a_init_golden_ctx_image()
Set this HAL for all the chips
Jira NVGPU-2961
Change-Id: I1dd35d94fda5e5296af67c0abc944e200fb752ea
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070607
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
is_fault_engine_subid_gpc HAL pointer belongs to engine HAL unit instead of
fifo. This patch moves the HAL pointer to a newly constructed engine
HAL unit.
The following new files are added under HAL/fifo/
engines_gm20b.h
engines_gm20b.c
engines_gv11b.h
engines_gv11b.c
Jira NVGPU-1315
Change-Id: If28686bf7350563b06b13348a9fe3ef0099c35b2
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2031659
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pre-volta, cbc config is part of hw ltc and from volta onwards this is
moved to hw fb. Because of this, cbc_init functions are present in both
cbc unit and fb unit. Pre-volta uses cbc_init from cbc unit and from
volta onwards it uses cbc_init from fb unit.
With this patch, unified two cbc_init functions to cbc unit and created
new fb hal for cbc_configure. cbc unit uses fb hal for cbc_config and
fb unit is independent of cbc unit.
JIRA NVGPU-2897
Change-Id: Ib62f0b08547b031bcb5011c837e43c74931a22fe
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030906
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create Compression Bit Cache(CBC) unit to have comptags
cache related functionality in one place. In this patch
Moved following gpu ops from ltc to cbc and renamed accordingly:
void (*init)(struct gk20a *g, struct gr_gk20a *gr);
u64 (*get_base_divisor)(struct gk20a *g);
int (*alloc_comptags)(struct gk20a *g, struct gr_gk20a *gr);
int (*ctrl)(struct gk20a *g, enum gk20a_cbc_op op,
u32 min, u32 max);
u32 (*fix_config)(struct gk20a *g, int base);
To avoid ambiguity renamed function pointer from
init_comptags to alloc_comptags.
Moved following function from ltc.h to cbc.h:
nvgpu_ltc_alloc_cbc -> nvgpu_cbc_alloc
Also changed file name that implemented
nvgpu_cbc_alloc functionality from
os/ltc.c -> os/linux-cbc.c
JIRA NVGPU-2897
Change-Id: Ide32a98567e9a3f0a784d62221a6f484f8343e53
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030194
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In case of FBPA we need to consider mask of active FBPAs on dGPUs.
For that we have GR unit HAL g->ops.gr.add_ctxsw_reg_pm_fbpa()
Generic support to consider active mask of unit need not be in a HAL,
move it to common code in add_ctxsw_buffer_map_entries_subunits() itself
This API now supports providing active_unit_mask as its parameter
In case we don't need to consider unit mask caller will simply pass
~U32(0U) to indicate all units are active
In case of FBPA, add a new HAL g->ops.gr.hwpm_pm.get_active_fbpa_mask()
which gets mask of active FBPAs, and pass this value to common API
add_ctxsw_buffer_map_entries_subunits()
Jira NVGPU-2895
Change-Id: I0d208ce53abcd36929c25a4d248868d6eaa5c70d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069472
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create a new HAL unit hal.gr.hwpm_map that provides chip specific
support to common.gr.hwpm_map unit
We currently have common.gr HAL g->ops.gr.add_ctxsw_reg_perf_pma()
to handle chip specific alignment of perf_pma list
We only adjust the offset of list and remaining code is same
Hence delete above HAL, and add new HAL under hal.gr.hwpm_map
g->ops.gr.hwpm_map.align_regs_perf_pma() which returns correct
alignment if HAL is defined
Remove gr_gv100_add_ctxsw_reg_perf_pma() and
gr_gk20a_add_ctxsw_reg_perf_pma() APIs since they are no longer used
Simplify perf_pma parsing by fixing alignment with new HAL and then
directly calling add_ctxsw_buffer_map_entries()
Jira NVGPU-2895
Change-Id: I1852db846e1f5441e482028c79a3f39c5142b0c2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069471
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the code involved in dealing with minion into a separate unit
called "nvlink_minion". This unit includes minion HW access, ucode
handling, exposing state of minion and also dealing with minion
interrupts. The interfaces to this unit are partially exposed using
g->ops.nvlink.minion ops and rest are part of nvlink_minion.h public
header.
JIRA NVGPU-2860
Change-Id: Iea9288ea5f0b26688540b1eb8ab64afd756941a4
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030103
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new power/clock gating functions that can be called by
other units.
New clock_gating functions will reside in cg.c under
common/power_features/cg unit.
New power gating functions will reside in pg.c under
common/power_features/pg unit.
Use nvgpu_pg_elpg_disable and nvgpu_pg_elpg_enable to disable/enable
elpg and also in gr_gk20a_elpg_protected macro to access gr registers.
Add cg_pg_lock to make elpg_enabled, elcg_enabled, blcg_enabled
and slcg_enabled thread safe.
JIRA NVGPU-2014
Change-Id: I00d124c2ee16242c9a3ef82e7620fbb7f1297aff
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_init_gr_config() we right now directly access a register
from hw_pri_ringmaster_*.h h/w header to read FBP count
Add a new HAL operation to PRIV_RING unit and start using it in GR code
instead of directly accessing register
g->ops.priv_ring.get_fbp_count()
Jira NVGPU-2894
Change-Id: I8a7b5423e28ef40612f55cb2915d7a2cff2f7435
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030673
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move bus related HAL code to new top level HAL directory: hal/.
This directory should mirror the common directory as much as
possible.
There's some nice pros here:
1. Isolate HAL and common code.
2. Since the common directory should not be including HAL
related headers directly this structure will make it
easier to catch these sorts of bugs with a script.
Change-Id: Ib9eb03a97d05db17b637b115c650adcbe9553d54
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011627
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
