- Add PMU NVRISCV BR failure HSI support.
- Created a falcon unit function to check for the
BR competition status check and called from
other units as needed.
Bug 3491596
Bug 3366818
Change-Id: I5c3c6a7e6aeaad68f77e6b24f21239e40d9a7f78
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2686370
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
ELPG initialization thread creation can fail when the process is killed.
That leads to driver resume failure.
That thread was stopped on suspend and re-created on resume. To avoid
the issue above, don't stop the ELPG thread in suspend and let the
first created thread handle the ELPG state transitions always.
And stop the ELPG thread during unload.
Also fix couple of instances of config flag as:
s/CONFIG_PMU_POWER_PG/CONFIG_NVGPU_POWER_PG
bug 3345977
Change-Id: I8952edf8d1664ed258f238e265002e716d1bf5c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573763
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix GSP/PMU registers priv errors which are seen as part of boot sequence.
- Couple of GSP/PMU Falcon/NVRISCV registers are allowed to access
upon NVRISCV bootrom completion but these registers were needed
to configure on legacy chips to bootstrap/configure Falcon.
- Add is_falcon2_enabled or NVGPU_PMU_NEXT_CORE_ENABLED check
to skip these registers.
JIRA NVGPU-7025
Change-Id: I087a477ade6736398dea113f89894a0ff73ae647
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2553127
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove the second parameter for the pmu_early_init() and pmu_init()
functions so they only require the gk20a object. The g->pmu was always
passed for this parameter. And this makes the API signature match the
other init functions in the driver.
JIRA NVGPU-3980
Change-Id: Iae9361a5f14bc5c1d02f4ddb6583f30b71b22d59
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202968
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
