Added dependency between the Kconfig options as follows where
'->' indicates 'depends on' relation:
SUPPORT_CDE -> COMPRESSION -> DMABUF_HAS_DRVDATA
DGPU -> GK20A_PCI
Defined Kconfig option for VPR and for DGPU that is dependent GK20A_PCI
as well. DGPU related sources are now compiled under config flag DGPU.
Also update conditional compilation of the driver paths w.r.t DGPU,
VPR and COMPRESSION flags.
Bug 2834141
Change-Id: Ia0a39d6d4cf8b36e7f955b7355a5ab41783f821c
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2299627
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Replaced ch->mmu_debug_mode_enabled with ch->mmu_debug_mode_refcnt.
If channel is enabled multiple times by userspace, then ref count is
updated accordingly. There is an expectation that enable/disable
calls are balanced for setting channel's mmu debug mode.
When unbinding the channel, decrease refcnt for the channel until it
reaches 0.
Also, removed tsg parameter from nvgpu_tsg_set_mmu_debug_mode as it
can be retrieved from ch.
Bug 2515097
Change-Id: If334e374a55bd14ae219edbfd3b1fce5ff25c226
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2184702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below hals since the corresponding functions are same on all
platforms and they are h/w independent
g->ops.gr.enable_ctxsw()
g->ops.gr.disable_ctxsw()
g->ops.gr.reset()
Call the functions directly at all places
Remove CONFIG_NVGPU_DEBUGGER from places where these functions are
called since they are not debugger dependent
This also helps to disable CONFIG_NVGPU_DEBUGGER and to keep recovery
sequence intact
Jira NVGPU-3506
Change-Id: Id2b208ca23dc4667e78edcd8ad242a8558e0ff64
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the nvgpu_init_mutex function return void.
In linux case, this doesn't affect anything since mutex_init
returns void.
For posix, we assert() and die if pthread_mutex_init fails.
This alleviates the need to error inject for _every_
nvgpu_mutex_init function in the driver.
Jira NVGPU-3476
Change-Id: Ibc801116dc82cdfcedcba2c352785f2640b7d54f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130538
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GPC MMU debug mode should be set if at least one channel
in the TSG has requested it. Add refcounting for MMU debug
mode, to make sure debug mode is disabled only when no
channel in the TSG is using it.
Bug 2515097
Change-Id: Ic5530f93523a9ec2cd3bfebc97adf7b7000531e0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2123017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed gk20a_channel_* APIs to nvgpu_channel_* APIs.
Removed unused channel API int gk20a_wait_channel_idle
Renamed nvgpu_channel_free_usermode_buffers in os/linux-channel.c to
nvgpu_os_channel_free_usermode_buffers to avoid conflicts with the API
with the same name in channel unit.
Jira NVGPU-3248
Change-Id: I21379bd79e64da7e987ddaf5d19ff3804348acca
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2121902
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added NVGPU_DBG_GPU_IOCTL_SET_CTX_MMU_DEBUG_MODE ioctl to set MMU
debug mode for a given context.
Added gr.set_mmu_debug_mode HAL to change NV_PGPC_PRI_MMU_DEBUG_CTRL
for a given channel. HAL implementation for native case is
gm20b_gr_set_mmu_debug_mode. It internally uses regops, which directly
writes to the register if the context is resident, or writes to
gr context otherwise.
Added NVGPU_SUPPORT_SET_CTX_MMU_DEBUG_MODE to enable the feature.
NV_PGPC_PRI_MMU_DEBUG_CTRL has to be context switched in FECS ucode,
so the feature is only enabled on TU104 for now.
Bug 2515097
Change-Id: Ib4efaf06fc47a8539b4474f94c68c20ce225263f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110720
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make a hal/mm/gmmu sub-unit for the GMMU HAL code. Also move the
gk20a specific HAL code there. gp10b will happen in the next patch.
This change also updates all the GMMU related HAL usage, of which
there is quite a bit. Generally the only change is a .gmmu needs to
be inserted into the HAL path. Each HAL init was also updated.
JIRA NVGPU-2042
Change-Id: I6c46bdfddb8e021f56103d9457fb3e2a226f8947
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Basic units like fifo, rc are having dependency on
gr_falcon. Avoided outside gr units dependency on gr_falcon
by moving following functions to gr:
int nvgpu_gr_falcon_disable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_disable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_enable_ctxsw(struct gk20a *g,
struct nvgpu_gr_falcon *falcon); ->
int nvgpu_gr_enable_ctxsw(struct gk20a *g);
int nvgpu_gr_falcon_halt_pipe(struct gk20a *g); ->
int nvgpu_gr_halt_pipe(struct gk20a *g);
HALs also moved accordingly and updated code to reflect this.
Also moved following data back to gr from gr_falcon:
struct nvgpu_mutex ctxsw_disable_mutex;
int ctxsw_disable_count;
JIRA NVGPU-3168
Change-Id: I2bdd4a646b6f87df4c835638fc83c061acf4051e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100009
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added new function to add require sw initionaltions. before enabling
gr hw. Added nvgpu_netlist_init_ctx_vars and nvgpu_gr_falcon_init_support
as part of this function:
int nvgpu_gr_prepare_sw(struct gk20a *g)
Moved following structure defs from gr_gk20a.h to gr_falcon.h and
renamed appropriately:
gk20a_ctxsw_ucode_segment -> nvgpu_ctxsw_ucode_segment
gk20a_ctxsw_ucode_segments -> nvgpu_ctxsw_ucode_segments
Moved following struct to gr_falcon_priv.h:
gk20a_ctxsw_ucode_info -> nvgpu_ctxsw_ucode_info
Moved following data from struct gk20a to new structure in gr_falcon_priv.h
struct nvgpu_gr_falcon:
struct nvgpu_mutex ctxsw_disable_lock;
int ctxsw_disable_count;
struct gk20a_ctxsw_ucode_info ctxsw_ucode_info;
Also moved following data from gr_gk20.h to struct nvgpu_gr_falcon:
struct nvgpu_mutex fecs_mutex;
bool skip_ucode_init;
wait_ucode_status
GR_IS_UCODE related enums
eUcodeHandshakeInit enums
Now add a pointer to this new data structure from struct gr_gk20a to
access gr_falcon related data and modified code to reflect this
change:
struct nvgpu_gr_falcon *falcon;
Added following functions to access gr_falcon data:
struct nvgpu_mutex *nvgpu_gr_falcon_get_fecs_mutex(
struct nvgpu_gr_falcon *falcon);
struct nvgpu_ctxsw_ucode_segments *nvgpu_gr_falcon_get_fecs_ucode_segments(
struct nvgpu_gr_falcon *falcon);
struct nvgpu_ctxsw_ucode_segments *nvgpu_gr_falcon_get_gpccs_ucode_segments(
struct nvgpu_gr_falcon *falcon);
void *nvgpu_gr_falcon_get_surface_desc_cpu_va(
struct nvgpu_gr_falcon *falcon);
JIRA NVGPU-1881
Change-Id: I9100891989b0d6b57c49f2bf00ad839a72bc7c7e
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2091358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added the following HALs
- ramin.base_shift
- ramin.alloc_base
Use above HALs in mm, instead of using hw definitions.
Defined nvgpu_inst_block_ptr to
- get inst_block address,
- shift if by base_shift
- assert upper 32 bits are 0
- return lower 32 bits
Added missing #include for <nvgpu/mm.h>
Jira NVGPU-3015
Change-Id: I558a6f4c9fbc6873a5b71f1557ea9ad8eae2778f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following functions are moved from gr_gk20a.c to common gr_falcon.c
gr_gk20a_disable_ctxsw -> nvgpu_gr_falcon_disable_ctxsw
gr_gk20a_enable_ctxsw -> nvgpu_gr_falcon_enable_ctxsw
gr_gk20a_halt_pipe -> nvgpu_gr_falcon_halt_pipe
Added new gr falcon hal to control ctxsw:
int gm20b_gr_falcon_ctrl_ctxsw(struct gk20a *g, u32 fecs_method,
u32 data, u32 *ret_val)
Parameters:
fecs_method: will be specified by a generic define provided in gr_falcon.h
header.
data: input data parameter (if any), set it to zero, if method did not
require any data input.
ret_val: pointer to expected output.
Added following ops for gr falcon:
int (*halt_pipe)(struct gk20a *g); -> this is moved from gr
int (*disable_ctxsw)(struct gk20a *g);
int (*enable_ctxsw)(struct gk20a *g);
JIRA NVGPU-1881
Change-Id: Idb3b7355b5a0bd3b9bb01f9f424c5d607616f540
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081308
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The exec_regops() API was using a u64 for the num_ops parameter. The
lower level APIs used by exec_regops() expect u32s for this value.
Update the interface to use u32.
This eliminates MISRA Rule 10.3 violations for assignment of objects of
different essential or narrower types.
JIRA: NVGPU-3023
Change-Id: I5a2a22916f81d8b3d882d224d07eedffcde1e3ee
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084207
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a_update_hwpm_ctxsw_mode() right now validates the incoming
hwpm mode, checks if it is already set, and if not, it will go ahead
and set the new hwpm mode by calling g->ops.gr.ctxsw_prog HALs
Instead of programming hwpm mode in gr_gk20a.c, move the programming
to gr/ctx and gr/subctx units by adding below APIs
nvgpu_gr_ctx_prepare_hwpm_mode() - validate the incoming mode and
check if it is already set
nvgpu_gr_ctx_set_hwpm_mode() - set pm mode in graphics context
nvgpu_gr_subctx_set_hwpm_mode() - set pm mode in subcontext
Add gpu_va field to struct pm_ctx_desc to store the gpu_va to be
programmed into context
Rename NVGPU_DBG_HWPM_CTXSW_MODE_* to NVGPU_GR_CTX_HWPM_CTXSW_MODE_*
and move them to gr/ctx.h
Remove below HALs since they are no longer used
g->ops.gr.ctxsw_prog.set_pm_mode_no_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_ctxsw()
g->ops.gr.ctxsw_prog.set_pm_mode_stream_out_ctxsw()
Jira NVGPU-1527
Jira NVGPU-1613
Change-Id: Id2a4d498182ec0e3586dc7265f73a25870ca2ef7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011093
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_DBG_GPU_IOCTL_CYCLE_STATS to debugger node, to
install/uninstall a buffer for cycle stats.
Add NVGPU_DBG_GPU_IOCTL_CYCLE_STATS_SNAPSHOT to debugger
node, to attach/flush/detach a buffer for Mode-E streamout.
Those ioctls will apply to the first channel in the debug session.
Bug 200464613
Jira NVGPU-1442
Change-Id: I0b96d9a07c016690140292fa5886fda545697ee6
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2002060
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move regops (gk20a/regops_gk20a.c) to separate unit common/regops/regops.c
Move corresponding header (gk20a/regops_gk20a.h) to include/nvgpu/regops.h
Move rest of the platform HAL files to common/regops/ as well
Fix all the header includes to include new public header
Remove *_apply_smpc_war() declarations from headers. Corresponding
functions were cleaned up already, and declarations were left somehow
Jira NVGPU-620
Change-Id: I8b8065b9c91f69809bdeb1b4caecdc7582c8a992
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1998723
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Regops does not depend on debug session logically
We right now include debugger.h in regops_gk20a.c to extract
channel pointer from debug session and to check if session is for
profiling or not
Update exec_regops_gk20a() to receive channel pointer and profiler
flag directly as parameters, and remove dbg_session_gk20a from
parameter list
Remove ((!dbg_s->is_profiler) && (ch != NULL)) checks from
check_whitelists(). Caller of exec_regops_gk20a() already ensures
that we have context bound for debug session
Use only is_profiler boolean flag in this case which should be
sufficient
Remove (ch == NULL) check in check_whitelists() if regops is of
type gr_ctx. Instead move this check to earlier function call
in validate_reg_ops(). If we have non-zero context operation on
a profiler session, return error from validate_reg_ops()
Update all subsequent calls with appropriate parameter list
Remove debugger.h include from regops_gk20a.c
Jira NVGPU-620
Change-Id: If857c21da1a43a2230c1f7ef2cc2ad6640ff48d9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1997868
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add a flag that let's userspace enable the unified VM functionality
on a selective bassis. This feature is working for all cases except
a single MODS trace. This will allow test coverage to be selectively
added in certain userspace tests as well to help prevent this feature
from bit rotting (as it has historically done).
Also update the unit test for the page table management in the GMMU
to reflect this new flag. It's been set to false since the target
platform for safety is currently not using unified address spaces.
Bug 200438879
Change-Id: Ibe005472910d1668e8372754be8dd792773f9d8c
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1951864
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in OS/Linux interface.
JIRA NVGPU-1036
Change-Id: I39b20f1d0e1a1da56d452f2c3d5ee049666cefe8
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929900
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gk20a/dbg_gpu_gk20a.c to common/debugger.c and make it a
separate common unit
Also rename gk20a/dbg_gpu_gk20a.h to include/nvgpu/debugger.h
We had two different HALs for debugger - gops.debugger and
gops.dbg_session_ops
Combine them into one single HAL gops.debugger and remove
gops.dbg_session_ops
Rename all exported APIs from debugger.h to be in the form of
nvgpu_*()
Jira NVGPU-1013
Change-Id: I136dc7786e3b2065921eb03b99f16049212f3cd2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1920075
Reviewed-by: Sachin Jadhav <sachinj@nvidia.com>
Tested-by: Sachin Jadhav <sachinj@nvidia.com>
The chid member of the channel_gk20a struct was being used as a unsigned
value. By being declared as an int, it was causing MISRA 10.3 violations
for implicit assignment of different types.
JIRA NVGPU-647
Change-Id: I7477fad6f0c837cf7ede1dba803158b1dda717af
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1918470
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate unit for perfbuf in common/perf/perfbuf.c which does not need to
include any h/w file. This unit will utilize HALs exported by
perf_*.c units for h/w accesses.
Add corresponding header file at include/nvgpu/perfbuf.h
Add new HAL gops.perfbuf with below operations :
gops.perfbuf.perfbuf_enable()
gops.perfbuf.perfbuf_disable()
Remove below debug session specific HALs
gops.dbg_session_ops.perfbuffer_enable()
gops.dbg_session_ops.perfbuffer_disable()
Delete file gv11b/dbg_gpu_gv11b.c since it is no longer needed now as it was
only including perfbuf sequence
Also remove perfbuf sequences from gk20a/dbg_gpu_gk20a.c
Jira NVGPU-1102
Change-Id: I57b87c9f0dcd85784f8002bc92728b6d78a68d98
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1819303
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Update header path of gk20a.h files present in os/
to <nvgpu/gk20a.h>
2) os_fence_android_sema.c indirectly was dependent on gk20a.h via
semaphore.h. So, added #include <nvgpu/gk20a.h> in
os_fence_android_sema.c and replaced the header with forward
declaration of struct gk20a in semaphore.h
Jira NVGPU-597
Change-Id: I96e23befeb80713f3a399071eb5498f6f580211d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1842868
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
NVGPU_DBG_GPU_IOCTL_REG_OPS currently doesn't return if the ctx was
resident in engine or not.
Regops are broken down into batches of 128 and each batch is executed
together. Since there only 32 bits were available in IOCTL args, returning
is ctx was resident isn't possible for all batches.
Hence return if the ctx was resident for the first batch.
Bug 200445575
Change-Id: Iff950be25893de0afadd523d4ea04842a8ddf2af
Signed-off-by: Anup Mahindre <amahindre@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1812975
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below regops HALs are not being called from anywhere, so remove them
gops.regops.get_runcontrol_whitelist_ranges()
gops.regops.get_runcontrol_whitelist_ranges_count()
gops.regops.get_qctl_whitelist_ranges()
gops.regops.get_qctl_whitelist_ranges_count()
HAL gops.regops.apply_smpc_war() is unimplemented for all the chips, and it
was originally only needed for gk20a which is not unsupported
So remove this HAL and its call too
Jira NVGPU-620
Change-Id: Ia2c74883cd647a2e94ee740ffd040a40c442b939
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
