Fix CERT issue in nvgpu_gr_falcon_bind_fecs_elpg where nvgpu_pmu_pg_buf
could return NULL. nvgpu_pmu_pg_buf is called from context where PG
will be enabled hence remove the NULL return logic as it is dead
code.
Replace nvgpu_pmu_pg_buf and nvgpu_pmu_pg_buf_get_cpu_va functions by
new function nvgpu_pmu_pg_buf_alloc.
CID 17860
Bug 3512546
Change-Id: I09820a966dadeb258167ce1433ca256f94845896
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2692466
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- When DISALLOW cmd is sent from driver to PMU the actual
completion of the disallow will be acknowledged by PMU
via a PG EVENT: ASYNC_CMD_RESP.
- Disallow needs a delayed ACK from PMU in order to disable
the ELPG.
- If ELPG is already engaged, the DISALLOW cmd will trigger
ELPG exit and then transition to PMU_PG_STATE_DISALLOW.
- After this whole process is completed, PMU will send
DISALLOW_ACK through ASYNC_CMD_RESP msg.
- After disallow command is sent from the driver, NvGPU driver
waits/polls for disallow command ack. This is sent immediately
by msg framework of PMU.
- Then, the driver will poll/wait for ASYNC_CMD_RESP event which
is the delayed DISALLOW ACK.
- The driver captures the ASYNC_CMD_RESP sent from PMU.
- set disallow_state to ELPG_OFF.
- If the driver does not wait/poll for this delayed disallow
ack from PMU, it can result in erros as PMU is still
processing DISALLOW cmd but the driver progressed further.
Bug 3580271
Change-Id: I332180c05b6a398107f065d54e9718b7038fb1b2
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2689500
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
The flag pmu->pg->golden_image_initialized is set to
true during initial GPU context creation and is not
cleared while the GPU goes into pm_suspend (during railgate).
Hence, when the GPU resumes after un-railgate it retains
the previous value which can cause ELPG to kick in immediately.
Due to this, when ELPG and Railgating are enabled, IDLE_SNAP
is seen for read access of gr_gpc0_tpc0_sm_arch_r reg.
To resolve this, if golden image is ready set the
pmu->pg->golden_image_initialized to suspend state during railgate,
to delay the early enable of ELPG. Add a new
pmu_init_golden_img_state hal in the NVGPU_INIT_TABLE_ENTRY.
This will be called after all the GR access is done and GPU resumes
completely after un-railgate. This hal will then check if
golden_image_initialized flag is in suspend state, it will set it
to ready state and then re-enable ELPG.
Bug 3431798
Change-Id: I1fee83e66e09b6b78d385bbe60529d0724f79e79
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2639188
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- When DISALLOW cmd is sent from driver to PMU the actual
completion of the disallow will be acknowledged by PMU
via a new RPC: ASYNC_CMD_RESP.
- Disallow needs a delayed ACK from PMU in order to disable
the ELPG.
- If ELPG is already engaged, the DISALLOW cmd will trigger
ELPG exit and then transition to PMU_PG_STATE_DISALLOW.
- After this whole process is completed, PMU will send
DISALLOW_ACK through ASYNC_CMD_RESP RPC.
- After disallow command is sent from the driver, NvGPU driver
waits/polls for disallow command ack. This is sent immediately
by RPC framework of PMU.
- Then, the driver will poll/wait for ASYNC_CMD_RESP event which
is the delayed DISALLOW ACK.
- The driver captures the ASYNC_CMD_RESP RPC sent from PMU.
- set disallow_state to ELPG_OFF.
- If the driver does not wait/poll for this delayed disallow
ack from PMU, it can result in pmu halt issues as PMU is still
processing DISALLOW cmd but the driver progressed further which
can result in errors.
Bug 3430273
Bug 3439350
Change-Id: If2acf8391d18cd3c6b8b07e3bf6577667ec99eea
Signed-off-by: Divya <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2631214
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_timeout_init() returns an error code only when the flags parameter
is invalid. There are very few possible values for flags, so extract the
two most common cases - cpu clock based and a retry based timeout - to
functions that cannot fail and thus return nothing. Adjust all callers
to use those, simplfying error handling quite a bit.
Change-Id: I985fe7fa988ebbae25601d15cf57fd48eda0c677
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2613833
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
* As of now, working on multiple chip bringup in nvgpu-next repo has
an issue because we end with losing control on source code (hard to
find which part of the code belongs to which chip) and it's valuable
history this affects chip migration on release.
* To support multiple chip bringup simultaneously, we need new
guidelines to avoid losing control on source code and make migration
easier. This change adds links to nvgpu-next repo.
* Updated return code to ENODEV for consistency
* Updated ACR unittest to work with ENODEV return code
NOTE:
These are the initial set of infrastructure changes, guidelines
will evolve, and source code will get updated accordingly.
Based on future chip features, Which part of the source code falls
under nvgpu-next repo is decided.
JIRA NVGPU-6574
Change-Id: I81827e35d189c55554df00e255b527a4473e0338
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556793
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ELPG initialization thread creation can fail when the process is killed.
That leads to driver resume failure.
That thread was stopped on suspend and re-created on resume. To avoid
the issue above, don't stop the ELPG thread in suspend and let the
first created thread handle the ELPG state transitions always.
And stop the ELPG thread during unload.
Also fix couple of instances of config flag as:
s/CONFIG_PMU_POWER_PG/CONFIG_NVGPU_POWER_PG
bug 3345977
Change-Id: I8952edf8d1664ed258f238e265002e716d1bf5c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573763
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Replace all nvgpu_next functions/structs either by 1) collapsing them
into nvgpu legacy functions/structs 2) renaming them as follows:
- nvgpu_next_*() => nvgpu_(ga10b/ga100)_*()
- nvgpu_next_*() => (ga10b/ga100)_*()
- nvgpu_next_*() => nvgpu_*() [only if this doesn't cause collision]
- nvgpu_next_*() = > nvgpu_*_extra()
Create hal.sim unit and move Ampere+ SIM code into it.
Jira NVGPU-4771
Change-Id: I215594a0d0df4bd663bd875a0d0db47bcb9ff6a2
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548056
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the upstream kernel ACCESS_ONCE is now deprecated with reason as
given in the following related commit:
commit 381f20fceba8e ("security: use READ_ONCE instead of deprecated
ACCESS_ONCE")
ACCESS_ONCE() does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step.
Replace usages of ACCESS_ONCE with READ_ONCE and WRITE_ONCE in nvgpu.
Bug 2834141
Change-Id: I9904c49e1a4d7b17ed2fe54360051d08595a2982
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2294096
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Typically, the PMU init thread will finish up long
before the golden context image has been initialized,
which means that ELPG hasn't truly been enabled at that
point.
Create a new function, nvgpu_pmu_reenable_pg(), which
checks if elpg had been enabled (non-zero refcnt), and
if so, disables then re-enables it.
Call this function from nvgpu_gr_obj_ctx_alloc() after
the golden context image has been initialized to ensure
that elpg is truly enabled.
Bug 200543218
Change-Id: I0e7c4f64434c5e356829581950edce61cc88882a
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2245768
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A call to exit the PMU state machine/kthread must
be prioritized over any other state change.
It was possible to set the state as PMU_STATE_EXIT,
signal the kthread and overwrite the state before
the kthread has had the chance to exit its loop.
This may lead to a "lost" signal, resulting in
indefinite wait during the destroy sequence.
Faulting sequence:
1. pmu_state = PMU_STATE_EXIT in nvgpu_pmu_destroy()
2. cond_signal()
3. pmu_state = PMU_STATE_LOADING_PG_BUF
4. PMU kthread wakes up
5. PMU kthread processes PMU_STATE_LOADING_PG_BUF
6. PMU kthread sleeps
7. nvgpu_pmu_destroy() waits indefinitely
This patch adds a sticky flag to indicate PMU_STATE_EXIT,
irrespective of any subsequent changes to pmu_state.
The PMU PG init kthread may wait on a call to
NVGPU_COND_WAIT_INTERRUPTIBLE, which requires a
corresponding call to nvgpu_cond_signal_interruptible()
as the core kernel code requires this task mask to
wake-up an interruptible task.
Bug 2658750
Bug 200532122
Change-Id: I61beae80673486f83bf60c703a8af88b066a1c36
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2181926
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following common and corresponding hal functions are non-safe. They are
either required for intr handling or for debug. Compile them out for
igpu safety release. Moved corresponding HALs to falcon_gk20a.c.
nvgpu_falcon_copy_from_emem
nvgpu_falcon_copy_to_emem
nvgpu_falcon_clear_halt_intr_status
nvgpu_falcon_set_irq
nvgpu_falcon_copy_from_dmem
nvgpu_falcon_copy_from_imem
nvgpu_falcon_print_dmem
nvgpu_falcon_print_imem
nvgpu_falcon_get_ctls
nvgpu_falcon_dump_stats can be used in the safety debug build.
JIRA NVGPU-898
JIRA NVGPU-2214
Change-Id: Icb7f904b088aa74b976f75a6a0ecdb783486bab3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2152978
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the nvgpu_init_mutex function return void.
In linux case, this doesn't affect anything since mutex_init
returns void.
For posix, we assert() and die if pthread_mutex_init fails.
This alleviates the need to error inject for _every_
nvgpu_mutex_init function in the driver.
Jira NVGPU-3476
Change-Id: Ibc801116dc82cdfcedcba2c352785f2640b7d54f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130538
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocate space at runtime for PMU RTOS fw struct, this helps
to reduce the size of nvgpu_pmu struct when LS_PMU support
is not required.
Allocation happens at pmu early init stage & will deinit at
remove_support stage.
JIRA NVGPU-1972
Change-Id: I1452b085f8d3a76e12186f788c2d999a8b4b202d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2111072
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Modified PMU subunits init sequence as they required during PMU RTOS
initialize stage, function nvgpu_pmu_early_init() allocates space for
all its subunit & its default values for further usage during runtime,
and function nvgpu_pmu_init() performs setup for sub units & starts
PMU-RTOS boot.
Deinit of all sub units allocated space will handled as part of
remove_support stage & also, during init stage upon failure of
init/setup sequence.
JIRA NVGPU-1972
Change-Id: I3ead9f9bb9e9c1178a02fc99eeec276660477325
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110154
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Currently PG task is created for both iGPU & dGPU as part PMU init
sequence path, but task is not required for dGPU or can be skipped
if ELPG is not supported on iGPU, made changes to create PG task only
if supported else skip it, and made some functions to private as these
are required by PG UNIT only.
-PG instance is allocated & set to default properties as needed if
support is enabled else skip it.
-Made changes in dependent files as required to reflect above changes
JIRA NVGPU-1972
Change-Id: I4efb7f1814a9ad48770acea2173e66f0a4c8a9c1
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct gr_gk20a defines boolean flag golden_image_initialized to
indicate if golden_image is initialized or not
common.gr.obj_ctx also added a flag of its own to check if golden_image
is ready
Add new API nvgpu_gr_obj_ctx_is_golden_image_ready() in
common.gr.obj_ctx unit to get status of golden_image
Use this new API everywhere to check if golden image is ready
Remove g->gr.ctx_vars.golden_image_initialized
Also remove ctx_mutex from struct gr_gk20a
Add new flag golden_image_initialized to struct nvgpu_pmu_pg and set it
when golden image is initialized. This is needed to avoid circular
dependency between GR and PMU
Jira NVGPU-3112
Change-Id: Id391294cede6424e15a9a9de29c40d013b509534
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2099400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created PMU fw unit to hold PMU RTOS f/w specific ops, images,
flags & command arguments needed for PMU RTOS ucode support.
Moved PMU fw ops from gk20a.gpu_ops to pmu.fw.ops as these ops
are needed to support different version of PMU fw version for
different chips
JIRA NVGPU-1955
Change-Id: I51385d8c20524431f07cba3378676464663deb20
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090769
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- PG seq_buf is used to send command to PMU which is
related to ZBC and it is handled as part of PG state
machine path so moving seq_buf from struct nvgpu_pmu
to pmu_pg struct.
- Also, adding two new functions in PG unit:
nvgpu_pmu_pg_init_seq_buf() and nvgpu_pmu_pg_free_seq_buf()
to allocate and free up space for seq_buf respectively.
JIRA NVGPU-1954
Change-Id: I153879c5d0e72c39e6282e9db1b062facc7bf071
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094188
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Removed unused struct from gr_gk20a.h
Change static allocation for struct gr_gk20a to dynamic type.
Change all the files that being affected by that change.
Call gr allocation from corresponding init_support functions, which
are part of the probe functions.
nvgpu_pci_init_support in pci.c
vgpu_init_support in vgpu_linux.c
gk20a_init_support in module.c
Call gr free before the gk20a free call in nvgpu_free_gk20a.
Rename struct gr_gk20a to struct nvgpu_gr
JIRA NVGPU-3132
Change-Id: Ief5e664521f141c7378c4044ed0df5f03ba06fca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095798
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pmu_ipc.c had functionality for rpc response handling and message cond
checks. This patch moves them to msg unit. And prepare cmd.h to group
together structs and functions related PMU commands.
JIRA NVGPU-1970
Change-Id: Iec5d72d02ab3ee51963631c828b301c56af8dc48
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079146
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move nvgpu_gr_wait_initialized to a gr.init hal function.
Move to hal function to avoid circular dependencies of headers.
Update nvgpu_gr_wait_initialized call to
g->ops.gr.init.wait_initialized
JIRA NVGPU-3016
Change-Id: Ia2e5f78da8528c76a8d08512151483579f250676
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085740
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
