This patch primary separates runlist modification from
runlist submits.
Instead of submitting the runlist(domain) immediately after
modification, a worker thread interface is now being used to
synchronously schedule runlist submits. If the runlist being
scheduled is currently active, the submit happens instantly,
otherwise, it will happen in the next iteration when the nvs
thread will schedule the domain. This external interface uses
a condition variable to wait for the completion of the
synchronous submits.
A pending_update variable is used to synchronize domain memory
swaps just before being submitted.
To facilitate faster scheduling via the NVS thread, nvgpu_dom
itself contains an array of rl_domain pointers. This can then
be used to select the appropriate rl_domain directly for scheduling
as against the earlier approach of maintaining nvs domains and rl
domains in sync everytime.
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I1725c7cf56407cca2e3d2589833d1c0b66a7ad7b
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2739795
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Enable/disable LSPMU interrupt in MC, as required LSPMU
interrupts are configured as part of LSPMU ucode init and
don't need any additional PMU IRQ register to set/clear as
part of GPU power-on/off sequence.
Bug 3681561
Change-Id: Ifb47bc9cc83e16e46649b0eef5f257acb02f302c
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2739476
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fix the following Coverity Defects:
clk_mon_tu104.c : Out-of-bounds write
clk_mon_tu104.c : Out-of-bounds read
clk_mon_tu104.c : Out-of-bounds access
Fix the following CERT-C Defects:
clk_mon_tu104.c : CERT STR31-C
For fixing an older Coverity defect,
we had changed datatype of domain mask
from u32 to unsigned long.
This thing generates another issue.
bit_pos range changes from [0,32) to [0,64).
Changing CLK_CLOCK_MON_DOMAIN_COUNT from 0x32U to 0x40U
solves the issue.
CID 10138023
CID 10138024
CID 10138025
CID 518885
CID 518887
CID 518890
Bug 3460991
Bug 3512546
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: I2a4853d87d7bb316db3de56ef34a039bf02486d7
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2728545
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Patch updates the ZBC table values as per the POR values for safety
build.
- Fix the color table default values initialization for standard build
which was being done in floating point format for CROP while it should
be in FB format. As per the documentation "CROP ZBC table should be
programmed exactly the way the L2 table is programmed".
Bug 3585766
Change-Id: I47d11b6a230189ee0c818f850d36b93c0aea0e54
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2724935
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
When MMU fault happens, if the id_type = 1, that means
fault happened in TSG. So in that path we set the error
notifier and let userspace know about faulty channel.
During this, we check if debugger is attached or not by
reading gr_gpc0_tpc0_sm0_dbgr_control0_r() register.
During this time ELPG is enabled and this read causes
IDLE SNAP error for ELPG.
To resolve this, move CG/PG disable function call
early in fifo recover code path. This ensures that
ELPG is disabled early before any read happens for any
GR register.
Bug 3660592
Change-Id: Ie5d01b7ccf00167b58f260e9142aa5deb2a08be4
Signed-off-by: Divya <dsinghatwari@nvidia.com>
(cherry picked from commit f09e429f2d142c20529bedc05acf193805e1bb25)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2720655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
To add GL/VK support for shader debugging via the SM trap handler
functionality, a write operation to the following PRI registers need to
be allowed in all chips (ga10b, gv11b, gm20b, gp10b):
- NV_PGRAPH_PRI_GPCS_MMU_DEBUG_CTRL
- NV_PGRAPH_PRI_GPCS_TPCS_SM_SCH_MACRO_SCHED
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_DBGR_CONTROL0
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_HWW_WARP_ESR_REPORT_MASK
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_HWW_GLOBAL_ESR_REPORT_MASK
In this patch, we are adding the above registers into allowlist, if they
were absent. Note that these registers included only in non-safety using
CONFIG_NVGPU_SET_FALCON_ACCESS_MAP flag.
Bug 3642131
Change-Id: I5f62731944b6b3e059afa80a491c3cf5c3656f60
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2715799
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Christopher Lentini <clentini@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Christopher Lentini <clentini@nvidia.com>
Patch defines a ZBC static table and configure it at sw layer. Later
existing API read this sw configuration and program it to hw.
This is applicable only for ga10b safety build and for other chips/
configuration it will be supported in the legacy way.
Bug 3585766
Change-Id: I00d79162c0b096616e3f555da965e82e47c014d1
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2713821
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update HAL function runlist.write_state to skip in-active
runlists in fifo.runlists. It is possible for one or more
engines to be floorswept in which case their associated
runlist will be in-active, example, if host supports
3 runlists(0, 1, 2) each serving 3 engines(0, 1, 2), and
engine-1 is floorswept, then runlist-1 becomes in-active and
the entry fifo->runlists[1] will be set to NULL.
Bug 3650588
Change-Id: Iaf9d75e310903c47b842e84dcfa2209d9fe7da96
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
(cherry picked from commit e29a2019cf8f4796737c670f98164f7783448d49)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2717075
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Background: In case of a deferred suspend implemented by gk20a_idle,
the device waits for a delay before suspending and invoking
power gating callbacks. This helps minimize resume latency for any
resume calls(gk20a_busy) that occur before the delay.
Now, some APIs spread across the driver requires that if the device
is powered on, then they can proceed with register writes, but if its
powered off, then it must return. Examples of such APIs include
l2_flush, fb_flush and even nvs_thread. We have relied on
some hacks to ensure the device is kept powered on to prevent any such
delayed suspension to proceed. However, this still raced for some calls
like ioctl l2_flush, so gk20a_busy() was added (Refer to commit Id
dd341e7ecbaf65843cb8059f9d57a8be58952f63)
Upstream linux kernel has introduced the API pm_runtime_get_if_active
specifically to handle the corner case for locking the state during the
event of a deferred suspend.
According to the Linux kernel docs, invoking the API with
ign_usage_count parameter set to true, prevents an incoming suspend
if it has not already suspended.
With this, there is no longer a need to check whether
nvgpu_is_powered_off(). Changed the behavior of gk20a_busy_noresume()
to return bool. It returns true, iff it managed to prevent
an imminent suspend, else returns false. For cases where
PM runtime is disabled, the code follows the existing implementation.
Added missing gk20a_busy_noresume() calls to tlb_invalidate.
Also, moved gk20a_pm_deinit to after nvgpu_quiesce() in
the module removal path. This is done to prevent regs access
after registers are locked out at the end of nvgpu_quiesce. This
can happen as some free function calls post quiesce might still
have l2_flush, fb_flush deep inside their stack, hence invoke
gk20a_pm_deinit to disable pm_runtime immediately after quiesce.
Kept the legacy implementation same for VGPU and
older kernels
Jira NVGPU-8487
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I972f9afe577b670c44fc09e3177a5ce8a44ca338
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2715654
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
This is setting evict_max_ways for L2 cache to the maximum
supported value for safety.
In normal build L2 cache MAX_EVICT_LAST is configure via
KMD and RegOps. RegOps is enabled only on standard build
with CONFIG_DEBUGGER flag. This method we cant use it for
safety build. Safety we can make use of the patch buffer
to patch the register while creating the context.
JIRA NVGPU-8227
Change-Id: Iec5d73197239b9cad31c6b593ca2b87c224aad5e
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2708702
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Usage of nvgpu_safe_add_u32 to increment nvgpu maintained corrected
ecc error counters can lead to BUG due to overflow as corrected ecc
errors can keep coming in and system will continue to operate.
In some configurations, uncorrected error counters can also
overflow and lead to BUG.
Increment these counters and their delta calculations to use
nvgpu_wrapping_add_u32.
JIRA NVGPU-7054
Change-Id: I85ddddfa46062744cccbe0756ad942787e72f01b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2601152
(cherry picked from commit f016e59189d2bd66e23f17ccb638f6d384b82fbd)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2623638
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In current form, the default domain acts like any schedulable
domain. TSGs are bound to it and it can be enumerated via the
public interfaces.
The new expectation for the default domain is meant to change
from the current form to a pseudo domain that cannot act like
an ordinary domain in other ways, i.e. it must not be reachable
by in particular the domain management API, it can't be removed,
does not show up in lists, and TSGs cannot be explicitly bound to
this domain. It won't participate in round-robin domain scheduling.
It is not really a domain, and acts like one only when activated in
the manual mode.
Following changes are made overall to support the above change in
definition.
1) Domain creation and attaching the domain to the scheduler are now
split into two separate functions. The new default domain (having ID
= UINT64_MAX) is created separately from a static function without
linking it with other domains in the scheduler.
2) struct nvgpu_nvs_scheduler explicitely stores the default domain
to support direct lookups.
3) TSGs are initially not bound to default domain/rl_domain.
Jira NVGPU-8165
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I916d11f4eea5124d8d64176dc77f3806c6139695
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2697477
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
BVEC changes for nvgpu_rc_pbdma_fault and nvgpu_rc_mmu_fault
started reporting below MISRA issue.
kernel/nvgpu/drivers/gpu/nvgpu/common/fifo/tsg.c:321:
1. misra_c_2012_rule_5_1_violation: Declaration with identifier
"nvgpu_tsg_unbind_channel_check_hw_state", which is ambiguous.
kernel/nvgpu/drivers/gpu/nvgpu/common/fifo/tsg.c:349:
2. other_declaration: The first 31 characters of identifiers
"nvgpu_tsg_unbind_channel_check_ctx_reload" and
"nvgpu_tsg_unbind_channel_check_hw_state" are identical.
Do below renames to fix the issue. Doing both for consistency.
s/nvgpu_tsg_unbind_channel_check_hw_state/nvgpu_tsg_unbind_channel_hw_state_check
s/nvgpu_tsg_unbind_channel_check_ctx_reload/nvgpu_tsg_unbind_channel_ctx_reload_check
JIRA NVGPU-6772
Change-Id: Ib92cabe11c486621351bf15ddb86e20d16d514c4
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2584152
(cherry picked from commit a619f259c6a4ffccb05550767212989af60c2a90)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2706551
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_device_get can return NULL if supplied invalid ID or instance
ID. We expect GR device struct to be non-NULL there hence just
assert that it is indeed non-NULL in gr_reset_engine and
ga10b_grmgr_init_gr_manager.
CID 224133
CID 250232
Bug 3512546
Change-Id: Id09a1c436a8e49b921111b940d3d013bd66bff7a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2707018
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The emulate mode support is determined after chip detect and is flagged
by using NVGPU_SUPPORT_EMULATE_MODE flag. The present logic prevents
user from configuring the emulate mode sysfs knobs if this flag is not
set, however the emulate mode usecase requires the user to configure the
syfs knob prior to power-on, hence defer emulate mode check to a later
stage after chip detect.
Bug 3621460
Change-Id: If522527542fa8d7e95ccbcff43b74adbb9e976e6
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2703953
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mayur Poojary <mpoojary@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: David Li <davli@nvidia.com>
Fixed following Coverity Defects:
ioctl_as.c : Bad bit shift operation
mc_tu104.c : Bad bit shift operation
vm.c : Bad bit shift operation
vm_remap.c : Bad bit shift operation
A new linux header file for ilog2 is created.
The files which used the old ilog2 function
have been changed to use the new nvgpu_ilog2
function.
CID 9847922
CID 9869507
CID 9859508
CID 10112314
CID 10127813
CID 10127899
CID 10128004
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: Ia201eea7cc426c3d6581e1e5ae3b882dbab3b490
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2700994
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Disable below interrupts on safety as they do not report any error
condition and are not used by CUDA and Graphics(VKSC) on safety
build.
Signoff from CUDA and VKSC is on Bug https://nvbugs/3588603
1. NV_PGRAPH_INTR_NOTIFY: This intr is set when the Notification
style is WRITE_THEN_AWAKEN.
2. NV_PGRAPH_INTR_SEMAPHORE: This is set when a 3d class sempahore is
released as the result ofa SetSemaphoreD method, when the
AwakenEnable field is TRUE.
3. NV_PGRAPH_INTR_BUFFER_NOTIFY: This bit is set when a Mem2mem DMA
completes and the LaunchDma method specifies the interrupt type
as INTERRUPT
4. NV_PGRAPH_INTR_DEBUG_METHODS: This is debug feature and not used
on QNX safety
Bug 3588603
JIRA NVGPU-8166
Change-Id: I6d07dfd2857ac047fac4599421600d364251df76
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2694363
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update PES, ROP exception handling for NVGPU_ERRATA_3524791. Enable the
errata for all Volta+ chips.
ROP, PES exceptions are being reported using the physical-id,
where logical-id should have been used. All ESR status registers are
reported using logical-id, so this matches with the SW expectation.
To address the (1), update ROP, PES exception handler translate from
physical to logical-id before reading the status registers.
Bug 3524791
Change-Id: Ieacbfb306bb0e69cf0113dc92f18e401573722e3
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680029
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Volta+ chips supports PES floorsweeping and Ampere+(iGPU) chips supports
ROP floorsweeping. At present, the driver isn't aware of PES, ROP
floorsweeping, make the driver PES, ROP floorsweeping aware by introducing the
following fields in nvgpu_gr_config:
- gpc_(rop/pes)_mask: Contains the bit mask of non FSed ROP/PES units per GPC.
- gpc_(rop/pes)_logical_id_map: Translates per GPC ROP/PES physical id to
logical id.
Introduce the following HAL functions to read PES/ROP FS data:
- gops_fuse.fuse_status_opt_(pes/rop)_gpc: This fuction gets the FS
config from the fuse.
- gops_top.get_max_(pes/rop)_per_gpc: Gets the maximum number of PES/ROP
units that can be present in a GPC.
In addition, introduce the enabled flag NVGPU_SUPPORT_PES_FS to identify chips
which support PES floorsweeping, piggyback on NVGPU_SUPPORT_ROP_IN_GPC
enabled flag to identify ROP floorsweeping.
Bug 3524791
Change-Id: I065bab6c02618fe38892c8c890b069c340b85301
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2679570
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new profiler resource type NVGPU_PROFILER_PM_RESOURCE_TYPE_PC_SAMPLER.
Introduce regops HAL get_hwpm_pc_sampler_register_ranges to get
allowlist for PC_SAMPLER resources. Re-generate allowlist files to include
register ranges for PC_SAMPLER resources.
Update uapi header to advertise new resource type
NVGPU_PROFILER_PM_RESOURCE_ARG_PC_SAMPLER.
Bug 3408536
Change-Id: I7009ef822665771eed727da48ef1e89dcc6b9c4b
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2689057
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below listed HSI are handled with PMU ISR handler and
all these triggers interrupt from individual unit upon issue.
-Add ECC check for IMEM, DMEM, DCLS, REG, and MPU as per
HSI req
-Add MEMERR check for GPU_PMU_ACCESS_TIMEOUT_UNCORRECTED
PMU HSI id
-Add IOPMP check for GPU_PMU_ILLEGAL_ACCESS_UNCORRECTED
PMU HSI id
-Add WDT check for GPU_PMU_WDT_UNCORRECTED PMU HSI id
Bug 3491596
Bug 3366818
Change-Id: I751d653e447017ac62a2459da2c6bb9da506f438
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2686566
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In Drive 6.0, the error reporting is supported only for orin (ga10b)
in dev-main. For this purpose, this patch does the following:
- Removes the redundant reporting of following IDs from gv11b:
- GPU_HOST_PFIFO_SCHED_ERROR
- GPU_HOST_PFIFO_CTXSW_TIMEOUT_ERROR
- GPU_HOST_PBDMA_HCE_ERROR
- GPU_MMU_L1TLB_SA_DATA_ECC_UNCORRECTED
- GPU_MMU_L1TLB_FA_DATA_ECC_UNCORRECTED
- GPU_LTC_CACHE_DSTG_ECC_CORRECTED
- GPU_LTC_CACHE_TSTG_ECC_UNCORRECTED
- Migrates the reporting of following IDs from gv11b to ga10b:
- GPU_SM_L1_TAG_ECC_CORRECTED
- GPU_SM_L1_TAG_ECC_UNCORRECTED
- GPU_SM_CBU_ECC_UNCORRECTED
- GPU_SM_LRF_ECC_UNCORRECTED
- GPU_SM_L1_DATA_ECC_UNCORRECTED
- GPU_SM_ICACHE_L1_DATA_ECC_UNCORRECTED
- GPU_SM_ICACHE_L0_PREDECODE_ECC_UNCORRECTED
- GPU_SM_L1_TAG_MISS_FIFO_ECC_UNCORRECTED
- GPU_SM_L1_TAG_S2R_PIXPRF_ECC_UNCORRECTED
- Removes the unused ID that doesn't have any HSI related to it:
- GPU_HOST_PBDMA_PREEMPT_ERROR
In addition to the above, this patch does the following:
- Updates error IDs related to page fault error.
- Updates look-up table to remove unused error IDs.
JIRA NVGPU-8094
Bug 200729736
Change-Id: Ifea76d38ba609c894560e61ff5a6e406290f919e
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2685249
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
