Now that GR buffers always have a kernel mapping, remove the unnecessary
calls to nvgpu_mem_begin() and nvgpu_mem_end() on these buffers:
- global ctx buffer mem in gr
- gr ctx mem in a tsg
- patch ctx mem in a gr ctx
- pm ctx mem in a gr ctx
- ctx_header mem in a channel (subctx header)
Change-Id: Id2a8ad108aef8db8b16dce5bae8003bbcd3b23e4
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1760599
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To finish OS unification of the submit path, move the
gk20a_submit_channel_gpfifo* functions to a file that's accessible also
outside Linux code.
Also change the prefix of the submit functions from gk20a_ to nvgpu_.
Jira NVGPU-705
Change-Id: I8ca355d1eb69771fb016c7a21fc7f102ca7967d7
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1760421
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove Gr engine reset during ELPG entry.
Engine reset is causing clock gating logic to get reset thus
clock gating gets disabled during ELPG entry sequence.
It leads to higher power numbers observed at light graphics.
Removing GR reset during ELPG entry helped save power.
Bug 2180198
Change-Id: I957951eb93f9d044f4d9a908f2b56a4903dfbfad
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1757695
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separate HAL added in gv11b and gv100 for
init_gpc_mmu function.
In gv11b HAL, RMW is enabled for gpu atomics
as default.
In gv100 HAL, GPC atomic capability mode will
get set based on the FB MMU capability.
If GPU is connected through NVLINK then mmu
will be set to RMW mode, else it will be in
L2 mode.
Bug 200390336
Change-Id: I224934f83d1762ec864ef8da7265dd01d86893a0
Signed-off-by: Ashish Srivastava <assrivastava@nvidia.com>
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735137
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
membar.sys does synchronization with the whole system (GPU and CPU),
membar.gl does synchronization within the GPU.
In gv11b, fb flush is generating membar.gl instead of membar.sys, which
is an issue. To fix this issue. following WAR is used:
1. Use bar1 engine id and bind it to a particular pdb,
2. Then instead of a fb_flush, issue a tlb invalidate of the bar1 pdb.
Now allocation of vm for bar1 instance block and bar1 binding is done
without check for bar1 support. Only bar1 register mapping is done
based on bar1 support enabled.
Bug 2112790
Change-Id: I76f43f1178a68f10823d48bc9da55d2bd686dd52
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1750257
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Add support for aborting runlist/s. Aborting runlist/s,
will abort all active tsgs and associated active channels
within these active tsgs
-Bare channels are no longer supported. Remove recovery
support for bare channels. In case there are bare
channels, recovery will trigger runlist abort
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: I6bec8a0004508cf65ea128bf641a26bf4c2f236d
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640567
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Even though tsg preempt timed out, teardown sequence would by
design require s/w to issue another preempt.
If recovery includes an ENGINE_RESET, to not have race conditions,
use RUNLIST_PREEMPT to kick all work off, and cancel any context
load which may be pending. This is also needed to make sure
that all PBDMAs serving the engine are not loaded when engine is
reset
-Add max retries for pre-si platforms for runlist preempt done
polling loop
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: If9d1731fc17e7e7281b24a696ea0917cd269498c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1709902
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-is_preempt_pending hal does not need timeout_rc_type input param as
for volta, reset_eng_bitmask is saved if preempt times out. For
legacy chips, recovery triggers mmu fault and mmu fault handler
takes care of resetting engines.
-For volta, no special input param needed to differentiate between
preempt polling during normal scenario and preempt polling during
recovery. Recovery path uses preempt_ch_tsg hal to issue preempt.
This hal does not issue recovery if preempt times out.
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: Ie76a18ae0be880cfbeee615859a08179fb974fa8
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1709799
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For Si platforms, gk20a_get_gr_idle_timeout returns
3000 ms i.e. 3 sec. Currently this time is used for
polling each pbdma, eng and runlist and this conflicts
channel timeout if preempt fails.
Use 1000 ms timeout for polling preempt timeout when
timeouts are enabled else use gk20a_get_gr_idle_timeout.
For non-si platforms, polling loop is depending on
max number of retries.
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: Icdb69b7b7d17292f2b6a43f1d8e9d75ff545d0ae
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1739543
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-During polling eng preempt done, reset eng only if eng stall
intr is pending. Also stop polling for eng preempt done
if eng intr is pending.
-Add max retries for pre-si platforms for poll pbdma and eng
preempt done polling loops.
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: I66b07be9647f141bd03801f83e3cda797e88272f
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694137
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch sets required fecs trace functions to hals.
- In gv100, GPU VA needs to programmed in ucode to
get FECS trace. Hence, setting this "NVGPU_FECS_TRACE_VA"
characteristic to be true.
EVLR-2708
Change-Id: I41845a1db8452b8e3fa9d67ecc4cabfac503fd0b
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1747269
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR allocates buffers from vidmem and passes explicitly flag
NVGPU_DMA_NO_KERNEL_MAPPING. Vidmem buffers are never mapped to CPU,
and dGPU ACR does not actually care, so switch to using
nvgpu_alloc_vid_at(). This removes another explicit dependency
to NVGPU_DMA_NO_KERNEL_MAPPING, which is going to be removed.
Change-Id: I532d40c5ba9e71f07461c526bd2a43e1eb01a290
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1753711
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update the Linux specific code to match the MM API docs in the
previous patch. The user passed page size is plumbed through
the Linux VM mapping calls but is ultimately ignored once the
core VM code is called. This will be handled in the next
patch.
This also adds some code to make the CDE page size picking
happen semi-intelligently. In many cases the CDE buffers can
be mapped with large pages.
Bug 2011640
Change-Id: I20e78e7d5a841e410864b474179e71da1c2482f4
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1740610
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
When generating the PTE size for a given mapping the code must
consider whether the GPU is being IOMMU'ed. The presence and
usage of an IOMMU implies the buffers will appear contiguous
to the GPU. Without an IOMMU we cannot assume that and therefor
must use small pages regardless of the size of the buffer to
be mapped.
Bug 2011640
Change-Id: I6c64cbcd8844a7ed855116754b795d949a3003af
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1697891
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gk20a_submit_channel_gpfifo the gpfifo entries can come from a kernel
buffer or from userspace. To simplify the logic in
gk20a_submit_append_gpfifo, extract out a function that copies the
entries directly from userspace to the gpu memory for performance, and
another function that copies from a kernel buffer to the gpu memory. The
latter is used for kernel submits and when the gpfifo pipe exists which
would mean that the gpfifo memory is in vidmem and is thus not directly
accessible with a kernel virtual pointer.
While this function is being changed a lot, also rename it to start with
nvgpu_ instead of gk20a_.
Additionally, simplify pushbuffer debug tracing by always using the
kernel memory for the prints. Tracing when the gpfifo memory has been
allocated in vidmem is no longer supported; sysmem is almost always used
in practice anyway.
Jira NVGPU-705
Change-Id: Icab843a379a75fb46054dee157a0a54ff9fbba59
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730481
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The biggest remaining Linuxism in the submit path is the
copy_from_user() calls for reading the gpfifo entries to the HW-visible
buffer. Abstract away the copy of one such segment starting at some
offset and keep the wraparound logic and vidmem proxy in the core submit
path.
Jira NVGPU-705
Change-Id: I0c6438045c695e5e3f5da4fbc0c92d2c6e7f32cb
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730480
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_submit_channel_gpfifo() supports reading the gpfifo entries from
either a kernel buffer or an userspace buffer in an ioctl. Add two
separate entry points: one for the ioctl and another for any other
kernel use. This shortens the function prototypes and simplifies and
clarifies the call sites slightly.
Jira NVGPU-705
Change-Id: If5141a459261a451f78cc50972f4c94d95ba44d1
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730479
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved PG refcount checking to a wrapper function, this
function manages the refcount and decides whether to call
dbg_set_powergate function.
Instead of checking the dbg_s->is_pg_disabled variable,
code is checking g->dbg_powergating_disabled_refcount
variable to know if powergate is disabled or not.
Updating hwpm ctxsw mode without disabling powergate
will result in priv errors.
Bug 200410871
Bug 2109765
Change-Id: I33c9022cb04cd39249c78e72584dfe6afb7212d0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1753550
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add an OS-abstracted API for printing the name of the current process
into a log message and convert the single occurrence of current->comm in
submit path power failure to use it.
Jira NVGPU-705
Change-Id: I1a509dcc5aecc3c89ce4582733888081b3e38f1f
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1749833
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
