To achieve permanent fault coverage, the CTAs launched by
each kernel in the mission and redundant contexts must execute
on different hardware resources.
This feature requires a change in software to make it possible
to modify the virtual SM id to TPC mapping across mission and
redundant contexts.
This CL adds only SM diversity flags which are exposed to
its clients through ioctl/devctl interfaces.
Actual virtual SM id to TPC mapping implementation
will be part of upcoming patch sets.
Added NvGpu CFLAGS to identify the safety build
"CONFIG_NVGPU_BUILD_CONFIGURATION_IS_SAFETY"
JIRA NVGPU-4133
Change-Id: I5a18256780e6726e399e39c1c8d155d2ef07d7bd
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2250461
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
HAL gops.gr.config.init_sm_id_table() initializes SM count in struct
nvgpu_gr_config. It is almost impossible that SM count is detected as
zero.
Hence remove the error check and add an assert instead.
This also helps with code coverage tests since it is difficult to
simulate error condition of having zero SMs detected.
Also, HAL gops.gr.config.init_sm_id_table() should always be defined
for each platform. Hence remove unnecessary check.
Jira NVGPU-4373
Change-Id: Ibd9b301b28d5bd2952367346a8f12fabcee2abd9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247845
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_mc_log_pending_intrs is debugging related function hence compile
out that and related functionality under CONFIG_NVGPU_NON_FUSA.
nvgpu_mc_intr_enable is applicable for older chips hence compile out
under CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA.
Update BUS, CE, ECC, FIFO, MC, PRIV_RING, GR, LTC, FB, PMU units'
doxygen comments based on recent ECC and MC refactoring.
JIRA NVGPU-4439
Change-Id: I337318683d6311b9c2b5748f2fb07dff29a6584f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2252853
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Remove non-safe TPC powergate feature from the safety
build by introducing a new flag:
CONFIG_NVGPU_TPC_POWERGATE
- Move nvgpu_init_power_gate_gr() under same compile time flag.
and move HAL function gr_gv11b_powergate_tpc() to tpc_gv11b.c
- Also, remove the negative test scenario and
usage of tpc_powergate from unit tests
JIRA NVGPU-4149
Change-Id: If489482401e94de499e472b16b1bc091b00992e6
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2242323
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FECS ucode introduces separate register lists for control registers, so
that they can be restored separately from PM state.
Added support for:
- LIST_compressed_nv_perf_sys_control_ctx_regs
- LIST_compressed_nv_perf_pma_control_ctx_regs
- LIST_compressed_nv_perf_fbp_control_ctx_regs
- LIST_compressed_nv_perf_gpc_control_ctx_regs
Bug 200507276
Change-Id: Ifce398bcb298822f3a46cf372ef9610a46a8df0c
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2193528
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Typically, the PMU init thread will finish up long
before the golden context image has been initialized,
which means that ELPG hasn't truly been enabled at that
point.
Create a new function, nvgpu_pmu_reenable_pg(), which
checks if elpg had been enabled (non-zero refcnt), and
if so, disables then re-enables it.
Call this function from nvgpu_gr_obj_ctx_alloc() after
the golden context image has been initialized to ensure
that elpg is truly enabled.
Bug 200543218
Change-Id: I0e7c4f64434c5e356829581950edce61cc88882a
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2245768
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently for every +/-5 degC change in
temperature, PMU internally evaluate VF curve on
temp change and will send VFE callback to NVGPU for
initiating change seq to program voltage and frequency.
This is the only callback we receive on temp change
which we handle in perf unit, and we don't have any
other temp events raised by PMU.
So, deleting the therm event handler.
NVGPU-4360
Change-Id: I3c7279dcf691135c178b6a05766403a935bc7e73
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2241488
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support in nvgpu to parse and get the freq cap from DT.
The patch does below
Parse the DT and gets the freq cap value during probe.
During clk_arb init compare this with P0.Max and takes the lowest.
Send change_seq with the new value and set dgpu freq.
Use the lowest for "get points","get default","set VF".
Bug 200556366
Change-Id: Ie10243f9bf83cb5ae07ebcc4cdc8efaffa56c309
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204644
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move graphics related defs and functions under CONFIG_NVGPU_GRAPHICS
switch.
Move classes not supported in GV11B under CONFIG_NVGPU_NON_FUSA
switch.
Add missing valid class numbers to gpu_class.is_valid HAL.
Also remove un-used class defs from class.h header.
Lot of qnx safety tests are still using graphics 3d class.
Until those tests got fixed, allowing 3d graphics class
as valid class for safety build.
JIRA NVGPU-4301
Change-Id: Ifd2a13bee3210821799c2bca10e7245eb3c79121
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Whitelist 2 MISRA Rule 17.2 violations in MM that were approved as
deviations in TID-278. These two violations are for recursive functions
that handle page table descriptors in the GMMU page table. Both cases
are tightly controlled recursion by limiting the recursion depth to the
number of possible page table levels in the hardware. For current
hardware that is a maximum recursion depth of 5 which is easily an
acceptable depth and should cause no stack issues.
JIRA NVGPU-3489
JIRA NVGPU-3492
JIRA TID-278
Change-Id: I5b801ff77f66bb8698f1d6adcd41ebbad3f86f92
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2230077
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The two MM functions nvgpu_set_pd_level() and nvgpu_vm_do_free_entries()
are simple recursive functions for processing page descriptors (PDs) by
traversing the levels in the PDs. MISRA Rule 17.2 prohibits functions
calling themselves because "unless recursion is tightly controlled, it
is not possible to determine before execution what the worst-case stack
usage could be." So, this change limits the recursion depth of each of
these functions to the maximum number of page table levels by checking
the level against the MM HAL max_page_table_levels().
This also required configuring this HAL in various unit tests as they
were no previously using this HAL.
JIRA NVGPU-3489
Change-Id: Iadee3fa5ba9f45cd643ac6c202e9296d75d51880
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224450
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_falcon_setup_bootstrap_config functionality can be kept static.
nvgpu_falcon_bl_bootstrap and nvgpu_falcon_bl_info are removed as it
is replaced by nvgpu_falcon_hs_ucode_load_bootstrap.
Update the test case accordingly, SWUTS and doxygen comments. Other
nits addressed about doxygen documentation.
JIRA NVGPU-2412
Change-Id: Idaa670ce6d6d6b735b4a2af34e1f1a229ff2a3e9
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2220089
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
