Enable/disable LSPMU interrupt in MC, as required LSPMU
interrupts are configured as part of LSPMU ucode init and
don't need any additional PMU IRQ register to set/clear as
part of GPU power-on/off sequence.
Bug 3681561
Change-Id: Ifb47bc9cc83e16e46649b0eef5f257acb02f302c
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2739476
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
The HSI error injection utility is an on-bench debug and test utility
which can be used by customers and SQA to test end-to-end error
detection and reporting path.
Inplement callback function to integrate with this utility and allow
injecting GPU HSI related errors.
As part of callback function hsierrrpt_inj(), invoke the driver's
error-reporting logic which uses the EPD MISC_EC APIs. In future,
we can enhance the callback function to trigger driver's error
handling logic incrementally for different errors.
Bug 3413214
Change-Id: I2d050b6c850d6151b40095f243a6733b4ba74f47
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2727198
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
While creating a new channel, ioctls are called in the below sequence:
1. GPU_IOCTL_OPEN_CHANNEL
2. AS_IOCTL_BIND_CHANNEL
3. TSG_IOCTL_BIND_CHANNEL_EX
4. CHANNEL_ALLOC_GPFIFO_EX
5. CHANNEL_ALLOC_OBJ_CTX.
subctx pdbs and valid mask are programmed in the channel instance block
in the channel ioctls AS_IOCTL_BIND_CHANNEL & CHANNEL_ALLOC_GPFIFO_EX.
Programming them in the ioctl AS_IOCTL_BIND_CHANNEL is redundant.
Remove related hal g->ops.mm.init_inst_block_for_subctxs.
The hal init_inst_block will program context pdb and big page size.
The hal init_inst_block_core will program context pdb, big page size
and subctx 0 pdb. This is used by h/w units (fecs, pmu, hwpm, bar1,
bar2, sec2, gsp, perfbuf etc.).
For user channels, subctx pdbs are programmed as part of ramfc setup.
Bug 3677982
Change-Id: I6656b002d513404c1fd7c3d349933e80cca7e604
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2680907
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr ctx buffer in non-cacheable hence there is no need to do L2 cache
flush when updating the buffer. Remove the flushes.
pm ctx buffer is cacheable hence add l2 flush in the function
nvgpu_profiler_quiesce_hwpm_streamout_non_resident since it
updates the buffer.
Bug 3677982
Change-Id: I0c15ec7a7f8fa250af1d25891122acc24443a872
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2713916
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable DEVFREQ for OOT module unconditionally as the podgov governor
module.
linux/pm_qos is only used for downstream supported modifications
which is currently determined by CONFIG_GK20A_PM_QOS.
struct devfreq_dev_status doesn't have any field 'busy' in the upstream
driver hence enable it only for when downstream driver is in use
activated by CONFIG_GK20A_PM_QOS.
governor.h is only needed for android platforms which depend on 4.9
version of the kernel in downstream builds. Hence, added an compile
time flag to remove it for kernels versions greater than 4.9.
Jira LS-418
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: Id242bd28e66ed187208f0d7975ee0bc508730a88
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2705766
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Fix the following Coverity Defects:
clk_mon_tu104.c : Out-of-bounds write
clk_mon_tu104.c : Out-of-bounds read
clk_mon_tu104.c : Out-of-bounds access
Fix the following CERT-C Defects:
clk_mon_tu104.c : CERT STR31-C
For fixing an older Coverity defect,
we had changed datatype of domain mask
from u32 to unsigned long.
This thing generates another issue.
bit_pos range changes from [0,32) to [0,64).
Changing CLK_CLOCK_MON_DOMAIN_COUNT from 0x32U to 0x40U
solves the issue.
CID 10138023
CID 10138024
CID 10138025
CID 518885
CID 518887
CID 518890
Bug 3460991
Bug 3512546
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: I2a4853d87d7bb316db3de56ef34a039bf02486d7
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2728545
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Patch updates the ZBC table values as per the POR values for safety
build.
- Fix the color table default values initialization for standard build
which was being done in floating point format for CROP while it should
be in FB format. As per the documentation "CROP ZBC table should be
programmed exactly the way the L2 table is programmed".
Bug 3585766
Change-Id: I47d11b6a230189ee0c818f850d36b93c0aea0e54
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2724935
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch defines the IOCTL NVGPU_TSG_IOCTL_READ_ALL_SM_ERROR_STATES
to read the error states for all the SMs.
The corresponding input parameter is num_sm (number of SM error states to be read) and output is a list of error states for all the SMs.
Bug 200468220
Signed-off-by: Jinesh Parakh <jparakh@nvidia.com>
Change-Id: Iaf926b72d900a6c8f978fa034c20d76e482eb13f
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2717313
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: Sandarbh Jain <sanjain@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
There are some configs which are set for the stable kernel and
it is identified from the NV_BUILD_KERNEL_OPTIONS.
The stable kernel build nvgpu as out-of-tree module and
pass the environment config CONFIG_TEGRA_OOT_MODULE during
build.
Hence, it is not required to use the NV_BUILD_KERNEL_OPTIONS to
identify the kstable build. It uses CONFIG_TEGRA_OOT_MODULE for
setting the configs for build as module.
Bug 3652905
Change-Id: I6570760e91ca98a4c83d7691fad517b2c772e629
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2720729
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
vidmem buffers are using fd as buffer handles and we need to allocate more
than 1024 fds. tegra_alloc_fd was exported by TEGRA_MC driver that allowed
allocating more than 1024 fds, however that function is to be removed from
that driver.
Hence use now kernel exported function __alloc_fd directly from nvgpu.
This is currently to be used only for dgpu on downstream kernel 5.10.
Bug 3535321
Change-Id: I10cfc41a6439f07309cda9eb2f22746f3fbac996
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2702794
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Tested-by: Sagar Kamble <skamble@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch creates a sysfs node which is easier to parse than
the existing mig_mode_config_list node. This new node outputs
in the following format:
active: -1
num_configs: 2
num_instances: 2
id:000000000001 gr:000000000000 gpc:0003
id:000000000002 gr:000000000004 gpc:0003
num_instances: 3
id:000000000001 gr:000000000000 gpc:0003
id:000000000005 gr:000000000004 gpc:0002
id:000000000013 gr:000000000006 gpc:0001
Bug 200740852
Change-Id: I8a3d4425ccb88dd4e58bbe1908e0f7cc577ff191
Signed-off-by: Martin Radev <mradev@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2704349
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
To be able to access the full physical memory range, gpu's dma_mask
needs to be set to the max value of H/W compatible range.
For example. In order to support from 2GB to 66 GB, GV11B's dma_mask
needs to be atleast 37 bits. Set GV11B's dma_mask to 38 bit
and T23X's dma_mask to 39 bit. These values are supported by H/W
Bug 3656729
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: Icfff3c36a8c9cf074a254fa773c42e18020ae5de
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2723640
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Brad Griffis <bgriffis@nvidia.com>
When MMU fault happens, if the id_type = 1, that means
fault happened in TSG. So in that path we set the error
notifier and let userspace know about faulty channel.
During this, we check if debugger is attached or not by
reading gr_gpc0_tpc0_sm0_dbgr_control0_r() register.
During this time ELPG is enabled and this read causes
IDLE SNAP error for ELPG.
To resolve this, move CG/PG disable function call
early in fifo recover code path. This ensures that
ELPG is disabled early before any read happens for any
GR register.
Bug 3660592
Change-Id: Ie5d01b7ccf00167b58f260e9142aa5deb2a08be4
Signed-off-by: Divya <dsinghatwari@nvidia.com>
(cherry picked from commit f09e429f2d142c20529bedc05acf193805e1bb25)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2720655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
To add GL/VK support for shader debugging via the SM trap handler
functionality, a write operation to the following PRI registers need to
be allowed in all chips (ga10b, gv11b, gm20b, gp10b):
- NV_PGRAPH_PRI_GPCS_MMU_DEBUG_CTRL
- NV_PGRAPH_PRI_GPCS_TPCS_SM_SCH_MACRO_SCHED
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_DBGR_CONTROL0
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_HWW_WARP_ESR_REPORT_MASK
- NV_PGRAPH_PRI_GPCS_TPCS_SMS_HWW_GLOBAL_ESR_REPORT_MASK
In this patch, we are adding the above registers into allowlist, if they
were absent. Note that these registers included only in non-safety using
CONFIG_NVGPU_SET_FALCON_ACCESS_MAP flag.
Bug 3642131
Change-Id: I5f62731944b6b3e059afa80a491c3cf5c3656f60
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2715799
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Christopher Lentini <clentini@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Christopher Lentini <clentini@nvidia.com>
Patch defines a ZBC static table and configure it at sw layer. Later
existing API read this sw configuration and program it to hw.
This is applicable only for ga10b safety build and for other chips/
configuration it will be supported in the legacy way.
Bug 3585766
Change-Id: I00d79162c0b096616e3f555da965e82e47c014d1
Signed-off-by: prsethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2713821
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Update HAL function runlist.write_state to skip in-active
runlists in fifo.runlists. It is possible for one or more
engines to be floorswept in which case their associated
runlist will be in-active, example, if host supports
3 runlists(0, 1, 2) each serving 3 engines(0, 1, 2), and
engine-1 is floorswept, then runlist-1 becomes in-active and
the entry fifo->runlists[1] will be set to NULL.
Bug 3650588
Change-Id: Iaf9d75e310903c47b842e84dcfa2209d9fe7da96
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
(cherry picked from commit e29a2019cf8f4796737c670f98164f7783448d49)
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2717075
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Background: In case of a deferred suspend implemented by gk20a_idle,
the device waits for a delay before suspending and invoking
power gating callbacks. This helps minimize resume latency for any
resume calls(gk20a_busy) that occur before the delay.
Now, some APIs spread across the driver requires that if the device
is powered on, then they can proceed with register writes, but if its
powered off, then it must return. Examples of such APIs include
l2_flush, fb_flush and even nvs_thread. We have relied on
some hacks to ensure the device is kept powered on to prevent any such
delayed suspension to proceed. However, this still raced for some calls
like ioctl l2_flush, so gk20a_busy() was added (Refer to commit Id
dd341e7ecbaf65843cb8059f9d57a8be58952f63)
Upstream linux kernel has introduced the API pm_runtime_get_if_active
specifically to handle the corner case for locking the state during the
event of a deferred suspend.
According to the Linux kernel docs, invoking the API with
ign_usage_count parameter set to true, prevents an incoming suspend
if it has not already suspended.
With this, there is no longer a need to check whether
nvgpu_is_powered_off(). Changed the behavior of gk20a_busy_noresume()
to return bool. It returns true, iff it managed to prevent
an imminent suspend, else returns false. For cases where
PM runtime is disabled, the code follows the existing implementation.
Added missing gk20a_busy_noresume() calls to tlb_invalidate.
Also, moved gk20a_pm_deinit to after nvgpu_quiesce() in
the module removal path. This is done to prevent regs access
after registers are locked out at the end of nvgpu_quiesce. This
can happen as some free function calls post quiesce might still
have l2_flush, fb_flush deep inside their stack, hence invoke
gk20a_pm_deinit to disable pm_runtime immediately after quiesce.
Kept the legacy implementation same for VGPU and
older kernels
Jira NVGPU-8487
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Change-Id: I972f9afe577b670c44fc09e3177a5ce8a44ca338
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2715654
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
nvgpu_pmu_rpc_execute takes pmu rpc header address and dereferences
it at address past header based on rpc struct that the header is
part of.
This usage of pointer is not right and confuses CERT checker.
Instead, pass the rpc struct address as char pointer and use
as header or rpc struct as per need.
CID 17141
CID 154223
CID 17557
CID 154226
CID 153904
CID 153926
CID 153929
CID 153925
CID 153925
CID 225346
CID 225355
CID 225356
CID 225360
CID 225361
CID 225365
CID 225367
CID 296735
CID 330244
CID 17557
Bug 3512546
Change-Id: I93b154d4321e75c0d2b41f43d7c2b701682962a3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2710224
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below print is misleading and seems like an error.
[INFO] Missing support-gpu-tools property, ret =-22
'support-gpu-tools' property was added to allow disabling debugger
features on prod boards. The debugger/profiler support will be
enabled by default, even if the property is missing.
Make the INFO print conditional, more informational and less
dramatic.
Bug 3539518
Change-Id: I5fc50df30be23e1fd1ecc06282a0d50f3ca7ac64
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668464
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This is setting evict_max_ways for L2 cache to the maximum
supported value for safety.
In normal build L2 cache MAX_EVICT_LAST is configure via
KMD and RegOps. RegOps is enabled only on standard build
with CONFIG_DEBUGGER flag. This method we cant use it for
safety build. Safety we can make use of the patch buffer
to patch the register while creating the context.
JIRA NVGPU-8227
Change-Id: Iec5d73197239b9cad31c6b593ca2b87c224aad5e
Signed-off-by: Dinesh T <dt@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2708702
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
