- Remove handling for channels that are no more bound to tsg
as channel could be referenceable but no more part of a tsg
- Use tsg_gk20a_from_ch to get pointer to tsg for a given channel
- Clear unhandled gr interrupts
Bug 2429295
JIRA NVGPU-1580
Change-Id: I9da43a2bc9a0282c793b9f301eaf8e8604f91d70
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972492
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With PREEMPT_RT kernel, regular spinlocks are mapped onto sleeping
spinlocks (rt_mutex locks), and raw spinlocks retain their behaviour.
Schedule while atomic can occur in gk20a_channel_timeout_start,
as it acquires ch->timeout.lock raw spinlock, and then calls
functions that acquire ch->ch_timedout_lock regular spinlock.
Bug 200484795
Change-Id: Iacc63195d8ee6a2d571c998da1b4b5d396f49439
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2004100
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
A naked channel ID does not carry good information about the channel
validity and is a very low level construct for an API of this level.
Refactor the runlist updating fifo APIs to take a channel pointer.
While at it, delete the channel and wait_for_finish parameters from
gk20a_fifo_update_runlist_ids() - the only caller is suspend and resume
and the parameters were always null for channel and true for wait.
Jira NVGPU-1309
Jira NVGPU-1737
Change-Id: Ied350bc8e482d8e311cc708ab0c7afdf315c61cc
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1997744
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The nvgpu managed syncpoint is not needed for anything if a channel uses
usermode submits; in that case the channel would allocate an
user-managed syncpoint and use that. Create the channel sync in
nvgpu_channel_setup_bind() only if usermode submit is not enabled.
Bug 200466905
Change-Id: I976f4b4fd0c3131cb310c72b286329fb16f1f29a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1990270
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The channel timeout ends up in a strange state during timeout handling
for a brief moment; it can become stopped and started again, and the
timeout lock is released in the middle. Add a more explicit rewind
function to reset the timeout to start if it's active. The active check
allows to use this from gk20a_channel_timeout_restart_all_channels(), so
that's also modified.
Also replace the return statements with more readable control flow in
gk20a_channel_timeout_handler().
Change-Id: Ia7d67242dfc149ace1f4f841a837e90b6c985308
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989327
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 10.1 prohibits using signed values with bitwise operators.
Make fifo invalid ID macros compliant with this MISRA rule.
Also use these macros in source code instead of hardcoded numbers to
make the code more readable.
JIRA NVGPU-1006
Change-Id: I2f336d1decbc53b08f93587f2e00ea2cce47f72b
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1983700
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extract non-chip-specific code that manages the runlists (init, update,
reschedule etc.) to a new file in the common directory. Move the
declarations to a new matching runlist.h header.
Jira NVGPU-1309
Change-Id: I3c7e0032899516487037f47ddc9a7e7aa4b0b33a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_fifo_recover_ch does high-level calls and invokes
gk20a_fifo_recover. This function belongs to the channel unit and is
moved to the file channel.c. Also, the function is renamed to
nvgpu_channel_recover.
Jira NVGPU-1237
Change-Id: I31890f85fdb2c42648cc063dd9c4e7e35930dcef
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970033
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any channel specific functions having high-level software-centric
operations belong to the channel unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/channel.c. Also, rename the functions
to use the prefix nvgpu_channel_*.
gk20a_fifo_set_ctx_mmu_error_ch
gk20a_fifo_error_ch
gk20a_fifo_check_ch_ctxsw_timeout
Jira NVGPU-1237
Change-Id: Id6b6d69bbed193befbfc4c30ecda1b600d846199
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We had to force allocation of physically contiguous memory for
USERD in nvlink case, as a channel's USERD address is computed as
an offset from fifo->userd address, and nvlink bypasses SMMU.
With 4096 channels, it can become difficult to allocate 2MB of
physically contiguous sysmem for USERD on a busy system.
PBDMA does not require any sort of packing or contiguous USERD
allocation, as each channel has a direct pointer to that channel's
512B USERD region. When BAR1 is supported we only need the GPU VAs
to be contiguous, to setup the BAR1 inst block.
- Add slab allocator for USERD.
- Slabs are allocated in SYSMEM, using PAGE_SIZE for slab size.
- Contiguous channels share the same page (16 channels per slab).
- ch->userd_mem points to related nvgpu_mem descriptor
- ch->userd_offset is the offset from the beginning of the slab
- Pre-allocate GPU VAs for the whole BAR1
- Add g->ops.mm.bar1_map() method
- gk20a_mm_bar1_map() uses fixed mapping in BAR1 region
- vgpu_mm_bar1_map() passes the offset in TEGRA_VGPU_CMD_MAP_BAR1
- TEGRA_VGPU_CMD_MAP_BAR1 is called for each slab.
Bug 2422486
Bug 200474793
Change-Id: I202699fe55a454c1fc6d969e7b6196a46256d704
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1959032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.4 only allows the usage of arithmetic operations on
operands of the same essential type category.
Adding "U" at the end of the integer literals or casting operands
to have same type of operands when an arithmetic operation is
performed.
This fixes violations where an arithmetic operation is performed on
signed and unsigned int types.
JIRA NVGPU-992
Change-Id: I27e3e59c3559c377b4bd3cbcfced90fdf90350f2
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1921459
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
preempt_channel needs to use the channel to pass it to other
public functions, get access to a tsg etc. This qualifies it to take a
pointer to a channel as an input parameter instead of a chid.
Increment the channel ref counter using the function
gk20a_channel_from_id in functions where we get the chid from the h/w
registers directly. Once the prempt_channel function call is done,
use a gk20a_channel_put on the referenced channel.
Jira NVGPU-1461
Change-Id: I6c87c8104cfcb418d468c8c590087fd4aeabf4bd
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1963200
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
replace tsgid with a pointer to a struct tsg_gk20a in the function
gk20a_fifo_tsg_abort(). gk20a_fifo_tsg_abort needs to enumerate through
all the channels within the tsg as well as pass the tsg pointer to
other functions, qualifying the need to use a pointer instead as an
input parameter.
Jira NVGPU-1461
Change-Id: I59cec05d5d778f733d0c3e9ffadf46e74e249080
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1956567
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gk20a_channel_from_id() to retrieve a channel, given a raw channel
ID, with a reference taken (or NULL if the channel was dead). This makes
it harder to mistakenly use a channel that's dead and thus uncovers bugs
sooner. Convert code to use the new lookup when applicable; work remains
to convert complex uses where a ref should have been taken but hasn't.
The channel ID is also validated against FIFO_INVAL_CHANNEL_ID; NULL is
returned for such IDs. This is often useful and does not hurt when
unnecessary.
However, this does not prevent the case where a channel would be closed
and reopened again when someone would hold a stale channel number. In
all such conditions the caller should hold a reference already.
The only conditions where a channel can be safely looked up by an id and
used without taking a ref are when initializing or deinitializing the
list of channels.
Jira NVGPU-1460
Change-Id: I0a30968d17c1e0784d315a676bbe69c03a73481c
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1955400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
poll_timeouts and timeout_restart_all_channels should
only handle channels that have not been recovered/aborted.
Check ch_timedout status of the channel to make sure
channel is still alive to be used. A channel reference
could still be available even if it is recovered but not
closed.
Bug 2404865
Change-Id: I016c8b9952ef1d4c349c2a2a2ca55cb81326d380
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929339
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Already torn down channels should not be suspended or
resumed. A channel reference could still be available
even if it is recovered but not closed. Use ch_timedout
status to check if channel is already recovered/aborted.
Bug 2404865
Change-Id: I718eab6032ee94a9322da7a239a978b388de2b01
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929338
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently has_timedout variable is protected by wmb at places
where it is being set and there is no correspoding rmb whenever
has_timedout variable is read. This is prone to errors for
concurrent execution. This change is supposed to fix this issue.
Rename has_timedout variable of channel struct to ch_timedout.
Also to avoid rmb every time ch_timedout is read,
ch_timedout_spinlock is added to protect ch_timedout
variable for taking care of concurrent execution.
Bug 2404865
Bug 2092051
Change-Id: I0bee9f50af0a48720aa8b54cbc3af97ef9f6df00
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1930935
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 8.3 requires that all declarations of a function
shall use the same parameter names and type qualifiers. There
are cases where the parameter names do not match between
function prototype and declaration. This patch will fix some of
these violations by renaming the prototype parameter.
JIRA NVGPU-847
Change-Id: I980ca7ba8adc853de9c1b6f6c7e7b3e4ac12f88e
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1926980
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 12.2 states that the right hand operand of a shift
operator shall lie in the range zero to one less than the width
in bits of the essential type of the left hand operand. This
patch will fix these violations by casting them to an appropriate
type or using the relevant BITxx() macros.
JIRA NVGPU-666
Change-Id: I57b6081e9bd98c45ca9f7aa5f35e1d2d66ed0134
Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1945655
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the result of a bitwise operation is used as a
boolean in the controlling expression of if and loop statements.
JIRA NVGPU-1020
Change-Id: I6a756ee1bbb45d43f424d2251eebbc26278db417
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1936334
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of non-boolean variable as
boolean in the controlling expression of an if statement or an
iteration statement.
Fix violations where a non-boolean variable is used as a boolean in the
controlling expression of if and loop statements.
JIRA NVGPU-1022
Change-Id: I61a2d24830428ffc2655bd9c45bb5403c7f22c09
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1943058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of non-boolean variable as
boolean in the controlling expression of an if statement or an
iteration statement.
Fix violations where a non-boolean variable is used as a boolean in the
controlling expression of if and loop statements.
JIRA NVGPU-1022
Change-Id: I957f8ca1fa0eb00928c476960da1e6e420781c09
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1941002
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations instandard C functions
in common code.
JIRA NVGPU-1036
Change-Id: Id6dea92df371e71b22b54cd7a521fc22812f9b69
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929899
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
If num_in_flight jobs is set use that to determine the proper
size of the priv_cmd_buf. If num_in_flight is not set then use
the original logic: the priv_cmd_buf is sized based on a worst
case assumption for the GPFIFO.
Also clean up MISRA issues.
Bug 2327792
Change-Id: Ie192caeb6cc48fdcac57e5cbb71c534aeaf46011
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1831095
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Instead of using num_inflight_jobs to determine whether to pre-alloc
resources for a channel use the c->deterministic flag and the
number of inflight jobs field. Non-determinsitic channels do not
require pre-alloced resources and deterministic channels with 0
in flight jobs (i.e no kernel job tracking, AKA fast path sumits)
also do not require pre-alloced resources.
Bug 2327792
Change-Id: I7e8eb0478c22e005ca2c46c555415afa0ded0be1
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850123
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Import userd and gpfifo buffers from userspace if provided via
NVGPU_IOCTL_CHANNEL_ALLOC_GPFIFO_EX. Also supply the work submit token
(i.e., the hw channel id) to userspace.
To keep the buffers alive, store their dmabuf and attachment/sgt handles
in nvgpu_channel_linux. Our nvgpu_mem doesn't provide such data for
buffers that are mainly in kernel use. The buffers are freed via a new
API in the os_channel interface.
Fix a bug in gk20a_channel_free_usermode_buffers: also unmap the
usermode gpfifo buffer.
Bug 200145225
Change-Id: I8416af7085c91b044ac8ccd9faa38e2a6d0c3946
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1795821
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct nvgpu_channel_sync is moved to a private header i.e.
channel_sync_priv.h present in common/sync/. All accesses to callback
functions inside the struct nvgpu_channel_sync in NVGPU driver is replaced by
the public channel_sync specific APIs.
Jira NVGPU-1093
Change-Id: I52d57b3d458993203a3ac6b160fb569effbe5a66
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1929783
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule-14.4 doesn't allow the usage of function pointers & integer
types as booleans in the controlling expression of an if statement or
an iteration statement.
Fix violations where a function pointer or a function whose return
value is an integer, is used as a boolean in the controlling expression
of if and loop statements.
JIRA NVGPU-1021
Change-Id: Ic5336268394ba4396ce80744c25930d2fb44dc42
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932147
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 14.4 doesn't allow the usage of integer types as booleans
in the controlling expression of an if statement or an iteration
statement.
Fix violations where the integer variables err, ret, status are used
as booleans in the controlling expression of if and loop statements.
JIRA NVGPU-1019
Change-Id: Ia2ec5f1db3c7a1884efe5ba7b8b4d9ebbd021734
Signed-off-by: Amurthyreddy <amurthyreddy@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1921373
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gk20a/dbg_gpu_gk20a.c to common/debugger.c and make it a
separate common unit
Also rename gk20a/dbg_gpu_gk20a.h to include/nvgpu/debugger.h
We had two different HALs for debugger - gops.debugger and
gops.dbg_session_ops
Combine them into one single HAL gops.debugger and remove
gops.dbg_session_ops
Rename all exported APIs from debugger.h to be in the form of
nvgpu_*()
Jira NVGPU-1013
Change-Id: I136dc7786e3b2065921eb03b99f16049212f3cd2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1920075
Reviewed-by: Sachin Jadhav <sachinj@nvidia.com>
Tested-by: Sachin Jadhav <sachinj@nvidia.com>
For a long time now, the ALLOC_GPFIFO_EX channel IOCTL has done much
more than just gpfifo allocation, and its signature does not match
support that's needed soon. Add a new one called SETUP_BIND to hopefully
cover our future needs and deprecate ALLOC_GPFIFO_EX.
Change nvgpu internals to match this new naming as well.
Bug 200145225
Change-Id: I766f9283a064e140656f6004b2b766db70bd6cad
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1835186
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) Move channel_sync_gk20a.* from gk20a/ to common/ directory as they
donot program any hardware registers. Also as an add-on rename
channel_sync_gk20a.* to channel_sync.* and update the headers
in required files.
2) Rename the struct gk20a_channel_sync to struct nvgpu_channel_sync. Also,
corresponding syncpt and semaphore versions of the struct alongwith
related methods are renamed by removing "gk20a" from their names and
adding "nvgpu".
3) Add misra-c cleanups
Jira NVGPU-1086
Change-Id: I4e0e21803ca3858dd7a5fc4d2454dba1f1bfcecd
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1812594
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
