Below CE interrupts do not have any users(usecases) on safety build;
disable them only on safety build.
1. BLOCKPIPE stall intr: Not used by GFX(VKSC) and CUDA on safety.
2. NONBLOCK_PIPE nonstall intr: Non-stall intrs are not supported
on safety build. Also, this one is not used by GFX(VKSC)
and CUDA.
3. STALLING_DEBUG intr: Added in Orin tree. It is only needed for
debugging. Disable on safety build as there is no current
usage in driver.
4. POISON_ERROR intr: Poison is a fault containment and not
supported on GA10b.
5. INVALID_CONFIG intr: Floor sweeping not supported on functional
safety SKU.
Bug 3548082
Change-Id: I8d97ccb38f138b2c04a780e1c255a64d28723405
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2671927
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delete the struct nvgpu_engine_info as it's essentially identical to
struct nvgpu_device. Duplicating data structures is not ideal as it's
terribly confusing what does what.
Update all uses of nvgpu_engine_info to use struct nvgpu_device. This
is often a fairly straight forward replacement. Couple of places though
where things got interesting:
- The enum_type that engine_info uses is defined in engines.h and
has a bit of SW abstraction - in particular the GRCE type. The only
place this seemed to be actually relevant (the IOCTL providing device
info to userspace) the GRCE engines can be worked out by comparing
runlist ID.
- Addition of masks based on intr_id and reset_id; those can be
computed easily enough using BIT32() but this is an area that
could be improved on.
This reaches into a lot of extraneous code that traverses the fifo
active engines list and dramtically simplifies this. Now, instead of
having to go through a table of engine IDs that point to the list of
all host engines, the active engine list is just a list of pointers to
valid engines. It's now trivial to do a for-all-active-engines type
loop. This could even be turned into a generic macro or otherwise
abstracted in the future.
JIRA NVGPU-5421
Change-Id: I3a810deb55a7dd8c09836fd2dae85d3e28eb23cf
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319895
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu does not support nested interrupts and as a result priv/pbus
interrupt do not reach cpu while other interrupts on intr_0 (stall)
tree are being processed. This issue is not specific to priv/pbus
but since pbus errors are critical, it is important to detect it
early on.
Below is the snippet from one of the failing logs where nvgpu
is doing recovery to process gr interrupt.
Right after GR engine is reset (PGRAPH of PMC_ENABLE), failing priv
accesses should have triggered pbus interrupt but it does not reach cpu
until gr interrupt is handled. Any interrupt that requires recovery will
take longer to finish isr as recovery is done as part of isr.
Also intr_0 (stall) interrupts are paused while stall interrupt is being
processed.
gm20b_gr_falcon_bind_instblk:147 [ERR] arbiter idle timeout, status: badf1020
gm20b_gr_falcon_wait_for_fecs_arb_idle:125 [ERR] arbiter idle timeout, fecs ctxsw status: 0xbadf1020
Fix to detect pbus intr while other stall interrupts are being processed
is to move pbus intr enable/disable/clear/handle to nonstall (intr_1)
tree. Configure pbus_intr_en_1 to route pbus to nostall tree.
Priv interrupts cannot be moved to nonstall (intr_1) tree due
to h/w not supporting this.
In Turing, moving pbus intr to nonstall is not feasible as mc_intr(1)
tree is deprecated. Add Turing specific stall intr handler hals with
original logic to route pbus intr to mc_intr(0).
JIRA NVGPU-25
Bug 200603566
Change-Id: I36fc376800802f20a0ea581b4f787bcc6c73ec7e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354192
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rule 8.6 requires each identifier with external linkage to have exactly
one external definitions.
Rule 10.x necessitates operands to have essential type; left and right
operands should be of same width and type.
Rule 17.7 requires function return value to be checked for error
information.
This patch fixes above mentioned errors in nvgpu.hal.mc.
Jira NVGPU-3855
Change-Id: I5440392de5d55dc98ed2002273af8a44a596cd3a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2162145
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves all the safe static and non-static functions as well
as its dependencies such as static declared structs into files with
_fusa.c extension. If the original file is left with no functions
remaining then the file is deleted.
Added changes in Makefile, Makefile.sources, nvgpu-hal-new.yaml for
compilation.
Jira NVGPU-3690
Change-Id: I81af67c308705faf8a681df63a6778e7de2076cf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2146761
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
