Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the ce2
sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I7dfd5e8dcd4d6f3623d1b795b6b2e15ff356a13a
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1509632
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Remove pointer to struct device from gk20a_gpu_ctx. The pointer is
not used anywhere, and it adds an unnecessary Linux dependency.
JIRA NVGPU-38
Change-Id: Id5843a21e4809ca840e4f5d561728f859bbd964e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1505202
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Since all debugfs code is Linux specific, remove
it from common code and move it to Linux module
Debugfs code is now divided into below
module specific files :
common/linux/debug.c
common/linux/debug_cde.c
common/linux/debug_ce.c
common/linux/debug_fifo.c
common/linux/debug_gr.c
common/linux/debug_mm.c
common/linux/debug_allocator.c
common/linux/debug_kmem.c
common/linux/debug_pmu.c
common/linux/debug_sched.c
Add corresponding header files for above modules too
And compile all of above files only if CONFIG_DEBUG_FS is set
Some more details of the changes made
- Move and rename gk20a/debug_gk20a.c to common/linux/debug.c
- Move and rename gk20a/debug_gk20a.h to include/nvgpu/debug.h
- Remove gm20b/debug_gm20b.c and gm20b/debug_gm20b.h and call
gk20a_init_debug_ops() directly from gm20b_init_hal()
- Update all debug APIs to receive struct gk20a as parameter
instead of receiving struct device pointer
- Update API gk20a_dmabuf_get_state() to receive struct gk20a
pointer instead of struct device
- Include <nvgpu/debug.h> explicitly in all files where debug
operations are used
- Remove "gk20a/platform_gk20a.h" include from HAL files
which no longer need this include
- Add new API gk20a_debug_deinit() to deinitialize debugfs
and call it from gk20a_remove()
- Move API gk20a_debug_dump_all_channel_status_ramfc() to
gk20a/fifo_gk20a.c
Jira NVGPU-62
Change-Id: I076975d3d7f669bdbe9212fa33d98529377feeb6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1488902
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Move the platform_gk20a.h include out of the ifdef CONFIG_DEBUG_FS
in the CDE code since dev_from_gk20a() is used regardless of
whether debugfs is enabled.
Also modify some of the CE ops to take a struct gk20a instead of a
struct device. This avoids any requirement for including
linux/device.h or platform_gk20a.h.
Bug 200310575
Change-Id: Ifef963cd0f66d05094a698200386cc6140920eac
Signed-off-by: skadamati <skadamati@nvidia.com>
Reviewed-on: http://git-master/r/1487830
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renaming was done with the following command:
$ find -type f | \
xargs sed -i 's/struct mem_desc/struct nvgpu_mem/g'
Also rename mem_desc.[ch] to nvgpu_mem.[ch].
JIRA NVGPU-12
Change-Id: I69395758c22a56aa01e3dffbcded70a729bf559a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1325547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Use nvgpu list APIs instead of linux list APIs
to store CE2 contexts
Jira NVGPU-13
Change-Id: I0c9b8b69e7e19a63265802abb4455a5cb2308b6f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1454011
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
This change refactors the teardown in remove to ensure that it is
possible to unload the driver while leaving fds open. This is achieved
by making sure that the SW state is kept alive till all fds are closed
and by checking that subsequent calls to ioctls after the teardown fail.
Normally, this would be achieved ny calls into gk20a_busy(), but in
kickoff we dont call into that to reduce latency, so we need to check
the driver status directly, and also in some of the functions
as we need to make sure the ioctl does not dereference the device or
platform struct
bug 200277762
JIRA: EVLR-1023
Change-Id: I163e47a08c29d4d5b3ab79f0eb531ef234f40bde
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1320219
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
JIRA: EVLR-1004
(*) Refactor the non-stalling interrupt path to execute clear on the
top half, so on dGPU case processing of stalling interrupts does not
block non-stalling one.
(*) Use a worker thread to do semaphore wakeups and allow batching of
the non-stalling operations.
(*) Fix a bug where some gpus will not properly track the completion
of interrupts, preventing safe driver unloads
Change-Id: Icc90a3acba544c97ec6a9285ab235d337ab9eefa
Signed-off-by: David Nieto <dmartineznie@nvidia.com>
Reviewed-on: http://git-master/r/1312796
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Lakshmanan M <lm@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Navneet Kumar <navneetk@nvidia.com>
Instead of using Linux APIs for mutex and spinlocks
directly, use new APIs defined in <nvgpu/lock.h>
Replace Linux specific mutex/spinlock declaration,
init, lock, unlock APIs with new APIs
e.g
struct mutex is replaced by struct nvgpu_mutex and
mutex_lock() is replaced by nvgpu_mutex_acquire()
And also include <nvgpu/lock.h> instead of including
<linux/mutex.h> and <linux/spinlock.h>
Add explicit nvgpu/lock.h includes to below
files to fix complilation failures.
gk20a/platform_gk20a.h
include/nvgpu/allocator.h
Jira NVGPU-13
Change-Id: I81a05d21ecdbd90c2076a9f0aefd0e40b215bd33
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1293187
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added interface to allow kernel to create privileged CE channels for
page migration and clearing support between sysmem and videmem.
JIRA DNVGPU-53
Change-Id: I3e18d18403809c9e64fa45d40b6c4e3844992506
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1173085
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
This CL covers the following modification,
1) Added multiple engine_info support
2) Added multiple runlist_info support
3) Initial changes for ASYNC CE support
4) Added ASYNC CE interrupt handling support
for gm206 GPU family
5) Added generic mechanism to identify the
CE engine pri_base address for gm206
(CE0, CE1 and CE2)
6) Removed hard coded engine_id logic and
made generic way
7) Code cleanup for readability
JIRA DNVGPU-26
Change-Id: I2c3846c40bcc8d10c2dfb225caa4105fc9123b65
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1155963
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
enables non-blocking interrupts in ce2 all other
ce2 interrupts are cleared and not handled.
bug 200036089
Change-Id: I9f47b06c677c72ac523019e6a3f70fedd07830a2
Signed-off-by: Sam Payne <spayne@nvidia.com>
Reviewed-on: http://git-master/r/671783
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
