We do not use the stored hshub_config* register values.
Remove these redundant fields from nvlink data structure too.
This also allows us to not #include a FB hardware header in
nvlink.
JIRA NVGPU-966
Change-Id: I3be169a958ec17370b55889d1e1fbabb887a79fd
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1794955
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the current code, gk20a.h includes io.h which gets directly included
in a lot of other files. io.h contains methods which uses a struct
gk20a as a parameter leading to a circular dependency between io.h
and gk20a.h. This can be mitigated by removing io.h from gk20a.h as
part of larger effort to moving gk20a.h to nvgpu/gk20a.h
JIRA NVGPU-597
Change-Id: I93e504fa9371b88152737b342a75580c65e8f712
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1787316
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
VBIOS link_disable_mask should be sufficient to find the connected
links. As VBIOS is not updated with correct mask, we parse the DT
node where we hardcode the link_id. DT method is not scalable as same
DT node is used for different dGPUs connected over PCIE. Remove the
DT parsing of link id and use HAL to get link_mask based on the GPU.
JIRA NVLINK-162
Change-Id: Idb7b639962928ce48711a0d7fc277c4c324bee91
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738967
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sequence of INIT* minion dlcmd varies between nvlink 2.0 and 2.2.
The order is strict for 2.2. Also there are new dlcmds added to the
nvlink bringup sequence. Add HAL to allow sequence update for nvlink 2.2.
Old sequence:
INITLANEENABLE-> INITDLPL
New Sequence:
INITDLPL->INITDLPL_TO_CHIPA->INITTL->INITLANEENABLE
JIRA NVLINK-176
Change-Id: I49e0a726f56e7d6122ac4cddf0f0e021d16f1926
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738329
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On nvlink 2.2, we poll for sublink substate to be stable before checking
sublink primary state. Currently, we read both TX and RX sublink state
during set_sublink_mode() irrespective of which sublink mode is changed.
This is not correct when we are polling on substate value while getting
sublink state.
JIRA NVLINK-164
Change-Id: I474705f059dbf41e5fb7e45bef455c33ee21aa95
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1734539
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Before nvlink 2.2, driver was responsible for setting the NVLink clocks
during NVLink initialization. For the purpose of security, NVLink PLL
handling is moved to Minion in nvlink 2.2 and driver should stop writing
to these registers.
JIRA NVLINK-167
Change-Id: I18392a29c322da55053037bfde62c8f74ee75288
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730597
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
RXDET is supported only on nvlink 2.2 devices and forward.
Add HAL to run RXDET selectively based on chip. RXDET needs to be
done after the links are out of reset but before any other link
level initialization.
minion_send_cmd is also made non-static to support RXDET
functionality.
JIRA NVLINK-160
Change-Id: Ic65b8dbc7281743f62072089ff3c805521ac9b38
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1729525
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
On GV100, we could not enable reflck repeater at source of PLL
which is shared by link 0/1. So we do not allow link 0 and 1 to
be used on GV100. This refclk repeater is present only on GV100.
Remove the check as we currently use link3 on GV100 and do not
plan to use any other link.
JIRA NVLINK-162
Change-Id: I9ffcc0b20d084a208271d2c594ec64b5bafaabfb
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1734538
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
TLC buffer sizes and credit init values do not match with
the values recommended by IAS for dGPU-Xavier configuration.
These buffer configuration values affect the latency over link.
JIRA NVLINK-158
Change-Id: I7822747cb0ae5a5efdd2d57e2104d0cb30bf9352
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1686601
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Migrate to the new NVLINK MINION ucode format. The new format strips out
an unnecessary ACR header from the ucode image. Moving to the new format
will allow MINION ucode generation scripts to be unified.
Bug 2113404
Change-Id: I9a72d6c3fa5edd50a4ec5eb835d157672931f994
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1709986
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes implements the initial (as per bringup) nvlink driver.
(1) SW initialization of nvlink core driver structures
(2) Nvlink interrupt handling
(3) Device initialization (IOCTRL, pll and clocks, device level intr)
(4) Falcon support for minion
(5) Minion load and bootstrapping
(6) Link initialization and DL PROD settings
(7) Device Interface init (and switching HSHUB to nvlink)
(8) HS set/get mode for both link and sublink
(9) Topology discovery and VBIOS settings.
(10) Ensures we get physical contiguous memory when Nvlink is enabled
This driver includes a hack for the current single dev/single link limitation.
JIRA: EVLR-2331
JIRA: EVLR-2330
JIRA: EVLR-2329
JIRA: EVLR-2328
Change-Id: Idca9a819179376cc655784482b24b575a52fa9e5
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1656790
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
