- Enable the reporting of PFIFO related errors such as engine syncpoint error,
memop timeout error, lb error to 3LSS framework.
- Remove the reporting of bind_error from gk20a since we already report it
from gv11b related fifo hal file.
Jira NVGPU-3087
Change-Id: Ic002be3a12a049010165870b861cdfb13a7f33d8
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088579
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added the following HALs
- ramin.base_shift
- ramin.alloc_base
Use above HALs in mm, instead of using hw definitions.
Defined nvgpu_inst_block_ptr to
- get inst_block address,
- shift if by base_shift
- assert upper 32 bits are 0
- return lower 32 bits
Added missing #include for <nvgpu/mm.h>
Jira NVGPU-3015
Change-Id: I558a6f4c9fbc6873a5b71f1557ea9ad8eae2778f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs
- fifo.alloc_inst
- fifo.free_inst
To channel HALs:
- channel.alloc_inst
- channel.free_inst
Moved the following fifo code:
- gk20a_fifo_alloc_inst
- gk20a_fifo_free_inst
To common channel code:
- nvgpu_channel_alloc_inst
- nvgpu_channel_free_inst
vgpu already implements
- vgpu_channel_alloc_inst
- vgpu_channel_free_inst
Jira NVGPU-3015
Change-Id: Id01cb34958281f43e3064d2754c0ab896809548d
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2089107
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU mutexes used by FIFO and runlists is functionality independent of
the PMU command and message management.
Remove related functionality from pmu_ipc.c and prepare pmu_mutex.c.
Prepare PMU HAL unit that contains gk20a specific PMU mutexes
handling.
JIRA NVGPU-1970
Change-Id: I0204be2ef9d2c000004667af3c18dc527d7ac25f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079142
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved below hals from {chip}/fifo_{chip}.[ch] to hal/fifo
get_mmu_fault_info
get_mmu_fault_desc
get_mmu_fault_client_desc
get_mmu_fault_gpc_desc
Moved gk20a_fifo_handle_dropped_mmu_fault to hal/fifo
JIRA NVGPU-1313
Change-Id: I949bcd482156c6e381006387372f13770277e8c5
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083287
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following functions are moved from gr_gk20a.c to common gr_falcon.c
gr_gk20a_disable_ctxsw -> nvgpu_gr_falcon_disable_ctxsw
gr_gk20a_enable_ctxsw -> nvgpu_gr_falcon_enable_ctxsw
gr_gk20a_halt_pipe -> nvgpu_gr_falcon_halt_pipe
Added new gr falcon hal to control ctxsw:
int gm20b_gr_falcon_ctrl_ctxsw(struct gk20a *g, u32 fecs_method,
u32 data, u32 *ret_val)
Parameters:
fecs_method: will be specified by a generic define provided in gr_falcon.h
header.
data: input data parameter (if any), set it to zero, if method did not
require any data input.
ret_val: pointer to expected output.
Added following ops for gr falcon:
int (*halt_pipe)(struct gk20a *g); -> this is moved from gr
int (*disable_ctxsw)(struct gk20a *g);
int (*enable_ctxsw)(struct gk20a *g);
JIRA NVGPU-1881
Change-Id: Idb3b7355b5a0bd3b9bb01f9f424c5d607616f540
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081308
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved enable/disable HALs from fifo to tsg:
- tsg.enable
- tsg.disable
gk20a_tsg_enable and gv11b_tsg_enable are moved to HAL,
since they are chip specific, even though they do not
directly access chip registers.
Removed vgpu_gv11b_tsg_enable as it was identical to
gv11b_tsg_enable.
Changed gv11b_fifo_locked_abort_runlist_active_tsgs and
gv11b_fifo_teardown_ch_tsg to use tsg.enable HAL instead
of calling directly gk20a_disable_tsg HAL implementation.
Jira NVGPU-2979
Change-Id: I721650c64dcf8cd158652e362292af45df43819f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083156
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
fifo_pbdma_isr is moved to fifo_intr_gk20a HAL unit and renamed to
gk20a_fifo_pbdma_isr.
The pbdma specific handling part of the function
gk20a_fifo_handle_pbdma_intr is now separated into a top level HAL
function named handle_pbdma_intr. This HAL function is implemented
for GM20B and all the other architectures use the same implementation.
handle_pbdma_intr can accept NULL values for the parameters handled and
error_notifier.
gk20a_fifo_handle_pbdma_intr is called from
gv11b_fifo_poll_pbdma_chan_status and gk20a_fifo_pbdma_isr.
The call to gk20a_fifo_handle_pbdma_intr from
gv11b_fifo_poll_pbdma_chan_status doesn't progress to recovery.
Thus, the function gk20a_fifo_handle_pbdma_intr is removed to decouple
pbdma handling from recovery. gv11b_fifo_poll_pbdma_chan_status now
directly calls the HAL handle_pbdma_intr. For gk20a_fifo_pbdma_isr,
rc_type is used to proceed to recovery by calling
gk20a_fifo_pbdma_fault_rc.
gk20a_fifo_pbdma_fault_rc is changed to public from static.
Jira NVGPU-2950
Change-Id: I4f3597aca2317d4b745cd47bab9dd95c927160a9
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073535
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created gr falcon hal unit with moving following hal functions
from gr to gr falcon:
u32 (*fecs_base_addr)(void);
u32 (*gpccs_base_addr)(void);
void (*dump_stats)(struct gk20a *g);
u32 (*fecs_ctxsw_mailbox_size)(void);
u32 (*get_fecs_ctx_state_store_major_rev_id)(struct gk20a *g);
Modified chip hals to populate these new functions and related code
now refers to gr falcon hals.
Modified kernel headers to have following defs for
fecs/gpccs base address in gm20b/gp10b/gv11b/tu104:
static inline u32 gr_fecs_irqsset_r(void);
static inline u32 gr_gpcs_gpccs_irqsset_r(void);
Created base gm20b hals for fecs/gpccs_base_addr and
removed redundant gp106 related hals.
JIRA NVGPU-1881
Change-Id: I16e820cc1c89223f57988f1e5723fd8fdcbfe89d
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081245
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Delete apply_ctxsw_timeout_intr ops and add
ctxsw_timeout_enable ops
Move chip specific sched_error and ctxsw_timeout
functions to hal/fifo/fifo_intr_* and hal/fifo/ctxsw_timeout_*
Add nvgpu_rc_ctxsw_timeout function under common/rc/rc.c
Do not check ctxsw timeout for channels that are no more
bound to tsg.
JIRA NVGPU-1312
Change-Id: Ide977fb60b3b72a27d9f22873f7a416c3bd1181d
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075734
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal fifo_access to control the gr_gpfifo_ctl_r register to
enable or disable the access bit and semaphore access bit.
g->ops.gr.init.fifo_access function call with true or false
parameter to enable or disable the fifo_access.
JIRA NVGPU-2951
Change-Id: I67ad7ce9f176d7ce347e8acb425f7a4bb9e088ca
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077705
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
init_pbdma_intr_descs HAL ops is used to update the internal values of
the struct intr within struct fifo_gk20a. Three kinds of
intr_descriptors are filled i.e. device_fatal_0, channel_fatal_0 and
restartable_0. Breaking them into separate HALs has the advantage of
reusing the h/w headers corresponding to the device_fatal_0 as they are
same across all the architectures while those of channel_fatal_0 varies.
Another advantage is to now decouple pbdma from filling in values
within the fifo_gk20a struct. A new method gk20a_fifo_init_pbdma_descs
is constructed that initializes the above intr struct by calling the
separate HAL ops for these.
Jira NVGPU-2950
Change-Id: I78ddc61a5d9b2088d34259af90f8b85817bf19d9
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072741
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following HAL pointers are moved to a separate HAL unit named pbdma.
pbdma_acquire_val
get_pbdma_signature
dump_pbdma_status
handle_pbdma_intr_0
handle_pbdma_intr_1
read_pbdma_data
reset_pbdma_header
The functions corresponding to these HAL units are also moved to
pbdma_{arch} files under hal/fifo correspondinging to arch gm20b,
gp10b, gv11b and tu104. Any calls to gk20a_readl and gk20a_writel
are replaced by nvgpu_readl and nvgpu_writel respectively.
Jira NVGPU-2950
Change-Id: I9723f30ddf6582df02c03fceb1fba26a206e1230
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071782
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Native and vgpu were using different paths for fifo
init/deinit code.
Use same nvgpu_fifo_init_support for init code:
nvgpu_fifo_init_support
g->ops.fifo.setup_sw
vgpu_fifo_setup_sw (NEW)
Use same nvgpu_fifo_remove_support for deinit code:
nvgpu_fifo_remove_support (NEW)
g->ops.fifo.cleanup_sw (NEW)
vgpu_fifo_cleanup_sw (NEW)
Also implemented gk20a_fifo_cleanup_sw for native case.
Jira NVGPU-1306
Jira NVGPU-2855
Change-Id: Iefe303cc224f804a206422e2efffda9da1616d89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029649
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.fecs_trace.*() HAL operations under gr operations as
g->ops.gr.fecs_trace.*()
Also rename gk20a_ctxsw_*() functions used in common code to the
format nvgpu_gr_fecs_trace_*()
Jira NVGPU-1880
Change-Id: Idf2f8fb3d7ba2832bf1837fd97b70b3cee412123
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070767
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have 3 header files for FECS tracing support
include/nvgpu/gr/fecs_trace.h : common header
include/nvgpu/ctxsw_trace.h : header that includes both common and
os-specific functions
os/linux/ctxsw_trace.h : linux specific header
Remove the second header since it is not needed.
Move all structures that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all function declarations that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all linux specific declarations in os/linux/ctxsw_trace.h and
rename this file as os/linux/fecs_trace_linux.h
Also rename os/linux/ctxsw_trace.c to os/linux/fecs_trace_linux.c
Jira NVGPU-1880
Change-Id: I05cc4489c4b6a64880b7d59c02b22cd2244d5e22
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070766
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gr_reset_mutex to engines_reset_mutex and acquire it
before initiating recovery. Recovery running in parallel with
engine reset is not recommended.
On hitting engine reset, h/w drops the ctxsw_status to INVALID in
fifo_engine_status register. Also while the engine is held in reset
h/w passes busy/idle straight through. fifo_engine_status registers
are correct in that there is no context switch outstanding
as the CTXSW is aborted when reset is asserted.
Use deferred_reset_mutex to protect deferred_reset_pending variable
If deferred_reset_pending is true then acquire engines_reset_mutex
and call gk20a_fifo_deferred_reset.
gk20a_fifo_deferred_reset would also check the value of
deferred_reset_pending before initiating reset process
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: I47de669a6203e0b2e9a8237ec4e4747339b9837c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2022373
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For handle_sched_error, change err to info print for failing eng
id returned as -1 i.e. FIFO_INVAL_ENGINE_ID as no engine is found
busy doing ctxsw. May be ctxsw already finished for the context
for which ctxsw timeout intr was triggered.
Possible Causes:
a)
On hitting engine reset, h/w drops the ctxsw_status to INVALID in
fifo_engine_status register. Also while the engine is held in reset
h/w passes busy/idle straight through. fifo_engine_status registers
are correct in that there is no context switch outstanding
as the CTXSW is aborted when reset is asserted.
This is just a side effect of how gv100 and earlier versions of
ctxsw_timeout behave.
With gv10b and later, h/w snaps the context at the point of error
so that s/w can see the tsg_id which caused the HW timeout.
b)
If engines are not busy and ctxsw state is valid then intr occurred
in the past and if the ctxsw state has moved on to VALID from LOAD
or SAVE, it means that whatever timed out eventually finished
anyways. The problem with this is that s/w cannot conclude which
context caused the problem as maybe more switches occurred before
intr is handled.
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: Ia79bee6e860fb179ee39024c963671d4f8245227
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030866
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The functions gk20a_dump_eng_status and gv11b_dump_eng_status belongs
to engine_status HAL unit.
1) The corresponding declaration and definitions of the above functions
are moved from fifo_{arch} files to engine_status_{arch} files.
2) The corresponding HAL pointer .dump_eng_status is moved from
fifo to engine_status HAL unit.
3) gv11b_dump_eng_status is now based to gv100b_dump_eng_status
4) Small changes in the files for ENGINE_STATUS such as correction of
HEADER DEFINES etc
Jira NVGPU-1315
Change-Id: I7fc06eab97206bc3b78c6f5c7aa30fa2c034961c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033632
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The corresponding HAL pointer for gk20a_fifo_wait_engine_idle is not
being invoked anywhere and hence they are removed from the code.
The function gk20a_fifo_wait_engine_idle belongs to engine unit and is
only called in a non-safe build, hence its moved to engine unit and is
restricted by a non-safe build flag NVGPU_ENGINE
Also, gk20a_fifo_wait_engine_idle is renamed to nvgpu_engine_wait_for_idle
Jira NVGPU-1315
Change-Id: Ie550c7e46a4284dfe368859d828b1994df34185f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to engine unit and are moved
gk20a_fifo_enable_engine_activity
gk20a_fifo_enable_all_engine_activity
gk20a_fifo_disable_engine_activity
gk20a_fifo_disable_all_engine_activity
These are renamed by replacing gk20a_fifo with nvgpu_engine as prefix.
These functions are only invoked by linux build and not required for
safety build and hence they are defined when
-DNVGPU_ENGINE is enabled.
Jira NVGPU-1315
Change-Id: I39d820879bb55b40e754526c657d794930a4b6a1
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
is_fault_engine_subid_gpc HAL pointer belongs to engine HAL unit instead of
fifo. This patch moves the HAL pointer to a newly constructed engine
HAL unit.
The following new files are added under HAL/fifo/
engines_gm20b.h
engines_gm20b.c
engines_gv11b.h
engines_gv11b.c
Jira NVGPU-1315
Change-Id: If28686bf7350563b06b13348a9fe3ef0099c35b2
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2031659
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new power/clock gating functions that can be called by
other units.
New clock_gating functions will reside in cg.c under
common/power_features/cg unit.
New power gating functions will reside in pg.c under
common/power_features/pg unit.
Use nvgpu_pg_elpg_disable and nvgpu_pg_elpg_enable to disable/enable
elpg and also in gr_gk20a_elpg_protected macro to access gr registers.
Add cg_pg_lock to make elpg_enabled, elcg_enabled, blcg_enabled
and slcg_enabled thread safe.
JIRA NVGPU-2014
Change-Id: I00d124c2ee16242c9a3ef82e7620fbb7f1297aff
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025493
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit f67bc51e51.
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Skip allocation and initialization of inactive runlists. Active
runlists info is stored in the active_runlist_info array.If a
runlist is active, then runlist_info[runlist_id] points to one
entry in active_runlist_info. Otherwise, runlist_info[runlist_id]
is NULL.
Operations that used to walk through all runlists are modified
to walk though active runlists only.
Bug 2470115
Bug 2522374
Change-Id: I98253ebebb4b1ba5957b57329820b94444b9d41b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030409
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit ade1d50cbe.
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Bug 2522374
Change-Id: I0deb6981bc6f5152bdf121f0a44429748aa14687
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030407
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are made in this patch.
1) nvgpu driver is incorrectly using u32 to store enum values in some
functions. Replaced them with correct type enum nvgpu_fifo_engine
2) change parameter type in nvgpu_engine_get_ids from engine_id[]
to *engine_ids
3) rename some function names to remove redundant characters to make
the name shorter.
4) Removed the initialization of enum nvgpu_fifo_engine in functions
where we assign a value before direct access.
Jira NVGPU-1315
Change-Id: Ic65b40c9cb1e90ad278cb36a00e1c9de51724f27
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2020230
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently PMU support enable check is done with multiple
methods which added complexity to know status of PMU
support.
Changed to replace multiple methods with support_pmu
flag to know the PMU support, support_pmu will be updated
at init stage based on platform/chip specific settings
to know the PMU support status.
Cleaned up support_pmu flag check with platform specific
PMU members in multiple places & moved check to
public functions
JIRA NVGPU-173
Change-Id: Ief2c64250d1f78e3b054203be56499e4d1d9b046
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2024024
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Skip allocation and initialization of inactive runlists.
Active runlists info is stored in the active_runlist_info array.
If a runlist is active, then runlist_info[runlist_id] points to
one entry in active_runlist_info. Otherwise, runlist_info[runlist_id]
is NULL.
Operations that used to walk through all runlists are modified to
walk though active runlists only.
Bug 2470115
Change-Id: Icd10281dc904bdee581ebc9cfeb662018ecca121
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025385
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently a fifo_runlist_info_gk20a structure is allocated and
initialized for each possible runlist. But only a few runlists
are actually used.
Use an array of pointers to runlists in fifo_gk20a. The array
keeps existing indexing by runlist_id. In this patch a context
is still allocated for each possible runlist, but follow up
patch will allow to skip context allocation for inactive
runlists.
Bug 2470115
Change-Id: I1615043cea84db35a270ade64695d51f85c1193a
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2025203
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The file semaphore.c is now split into 4 units namely
semaphore, semaphore_hw, semaphore_pool and semaphore_sea.
Each of the above units now have separate compilation units under
common/semaphore/. The public APIs corresponding to each unit is
present in include/nvgpu/semaphore.h. The dependency graph of the
below units is as follows where '->' indicates left depends on right.
semaphore -> semaphore_hw -> semaphore_pool -> semaphore_sea
Some of the other major changes made in this patch are as follows
i) Renamed some of the functions.
ii) Some functions are changed from private to public.
iii) Public header for semaphore contains only the declaration of the
corresponding structs as an opaque structure.
iv) Constructed a private header to contain internal functions common
to all the units and struct definitions corresponding to each unit.
v) Added new functions to provide access to internal members of the
units.
Jira NVGPU-2076
Change-Id: I6f111647ba9a9a9f8ef9c658f316cd5d6276c703
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2022782
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
