Begin removing all of the myriad flag variables in struct gk20a and
replace that with one API that checks for flags being enabled or
disabled. The API is as follows:
bool nvgpu_is_enabled(struct gk20a *g, int flag);
bool __nvgpu_set_enabled(struct gk20a *g, int flag, bool state);
These APIs allow many of the gk20a flags to be replaced by defines.
This makes flag usage consistent and saves a small amount of memory in
struct gk20a. Also it makes struct gk20a easier to read since there's
less clutter scattered through out.
JIRA NVGPU-84
Change-Id: I6525cecbe97c4e8379e5f53e29ef0b4dbd1a7fc2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1488049
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Fixed below static sparse warnings by making either
function as static or including right header.
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/common/linux/module.c:816:5: warning: symbol 'gk20a_pm_init' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:28:6: warning: symbol 'gk20a_bus_init_hw' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:54:6: warning: symbol 'gk20a_bus_isr' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:90:5: warning: symbol 'gk20a_read_ptimer' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/bus_gk20a.c:147:6: warning: symbol 'gk20a_init_bus' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/ltc_gk20a.c:232:6: warning: symbol 'gk20a_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gk20a/fb_gk20a.c:75:6: warning: symbol 'gk20a_fb_debug_mode_enabled' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/hal_gm20b.c:184:5: warning: symbol 'gm20b_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/fb_gm20b.c:165:5: warning: symbol 'gm20b_fb_vpr_info_fetch' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:103:5: warning: symbol 'gm20b_ltc_cbc_ctrl' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:168:6: warning: symbol 'gm20b_ltc_init_fs_state' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:195:6: warning: symbol 'gm20b_ltc_isr' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:221:5: warning: symbol 'gm20b_ltc_cbc_fix_config' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:236:6: warning: symbol 'gm20b_flush_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gm20b/ltc_gm20b.c:350:6: warning: symbol 'gm20b_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/tegra/linux/clk.c:72:6: warning: symbol 'nvgpu_linux_init_clk_support' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/ltc_gp10b.c:206:6: warning: symbol 'gp10b_init_ltc' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/fb_gp10b.c:98:6: warning: symbol 'gp10b_init_fb' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/hal_gp10b.c:190:5: warning: symbol 'gp10b_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp10b/priv_ring_gp10b.c:79:6: warning: symbol 'gp10b_init_priv_ring' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp106/hal_gp106.c:222:5: warning: symbol 'gp106_init_hal' was not declared. Should it be static?
- $TOP/kernel/nvgpu/drivers/gpu/nvgpu/gp106/fb_gp106.c:42:6: warning: symbol 'gp106_init_fb' was not declared. Should it be static?
Bug 200299572
Change-Id: I32f9a3cb65314bd1eb1a6d93cda5796cfa64d738
Signed-off-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-on: http://git-master/r/1481804
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Introduce a priv ring HAL and define ISR as the only function in it.
Introduce a gp10b version of the ISR that writes error message to
UART for every priv ring error, and leave the old chips with silent
error handling.
Bug 1846641
Change-Id: I73e38396205ac7bb7b8488b7fbca3ff67a3db3bb
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1473696
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Copy is_fmodel to struct gk20a at probe time, and access it from
gk20a instead of platform_gk20a.
JIRA NVGPU-16
Change-Id: Ib8d793ea2b02b62da3bfdbb6372d9927658b7ec6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1463540
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Use platform agnostic delay functions instead of Linux kernel APIs.
This allows removing dependency to Linux header linux/delay.h. At the
same time remove #include lines for other unused Linux headers.
JIRA NVGPU-16
Change-Id: I05df9d72edaf4bb061febe0cb40fc8a7cf9f51c7
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1460114
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
gk20a_err() and gk20a_warn() require a struct device pointer,
which is not portable across operating systems. The new nvgpu_err()
and nvgpu_warn() macros take struct gk20a pointer. Convert code
to use the more portable macros.
JIRA NVGPU-16
Change-Id: I8dc0ddf3b6ea38af6300c27558b60786c163da6d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1457344
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add wrapper header nvgpu/types.h. It checks if build is for Linux
kernel and pulls in linux/types.h.
Delete also all #includes for linux/types.h which are not strictly
necessary, and change the remaining ones to use the new wrapper.
JIRA NVGPU-13
Change-Id: I1ddfef0b0b9d840e3e41a62f69c7cb9148d2d5fa
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1453371
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the name field from struct gpu_ops up to struct gk20a. The field
is not a function op, so it doesn't belong in gpu_ops.
Replace all uses of dev_name() with use of g->name when possible.
JIRA NVGPU-16
Change-Id: Ic6e99e39258cbf3bb7c806962cbbd7de5126688f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1328534
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move clock APIs from gk20a_platform to gpu_ops. At the same time
allow use of internal get_rate/set_rate for querying both GPCCLK
and PWRCLK on iGPU.
At the same time we can replace calls to clk framework with the
new HAL and drop direct dependency to clk framework.
gp10b ops were replaced as a whole at HAL initialization. That
replaces anything set in platform probe stage, so reduce that to
touch only clock gating regs.
Change-Id: Iaf219b1f000d362dbf397d45832f52d25463b31c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1300113
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Read fuse values from GPU's own fuse registers instead of Tegra fuse
registers whenever possible. This reduces the number of dependencies
to Linux fuse code.
Some fuses do not have a corresponding register in GPU, so they're
left as is.
Change-Id: Id9f2f4da897f3e20b20c300a67f705e3fa5ba35a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1318278
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
The fuse headers are unified and moved all the content of
linux/tegra-fuse.h to the soc/tegra/fuse.h to have the
single fuse header for Tegra.
Use unified fuse header soc/tegra/fuse.h.
bug 200260692
Change-Id: Icab3ba5c3dbcd3fa831455c2f336942d356ff5ac
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/1287498
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gp10b HW headers to a new directory specially for them:
include/nvgpu/hw/gp10b
And change the code to include like so:
#include <nvgpu/hw/gp10b/hw_fb_gp10b.h>
This is part of the process to restructure the nvgpu driver.
Bug 1799159
Change-Id: Ic80ea5b7f5c280839e502e2178a345181f7a7ef9
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1280326
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
gp10b does not have an fbpa unit, although the
hw header files claim it does. Hardcode all fbpa
values to 0.
Bug 200249125
Change-Id: I6ed63b3231d7af8e31ccf5047d56bdb85f05a9d9
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1256422
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
get_litter_value API is updated to use int instead of
enum type.
JIRA GV11B-21
Change-Id: I982fdfe372f4be38aa4ed026a23e936d73190e79
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1252212
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
- Define fuse macros depending on kernel version as fuse
offset got changed in K4.4 and for K4.4 fuse defines are
defined in common header file (tegra-fuse.h)
- Use fuse control read/write APIs when reading control
registers for K4.4
Bug 200243956
Change-Id: I34dabd1a307d10010cb89ac6a5f1e3f5b177c0fc
Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
Reviewed-on: http://git-master/r/1245825
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add support for cyclestats snapshots in the virtual case
Bug 1700143
JIRA EVLR-278
Change-Id: I353efac6a17704c815a99745ac04d2c3d831351b
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: http://git-master/r/1216644
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
This CL covers the following modification,
1) Added multiple engine_info support
2) Added multiple runlist_info support
3) Initial changes for ASYNC CE support
4) Added ASYNC CE interrupt support for
Pascal GPU series
5) Removed hard coded engine_id logic and
made generic way
6) Code cleanup for readability
JIRA DNVGPU-26
Change-Id: Ibf46a89a5308c82f01040ffa979c5014b3206f8e
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1156022
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Move per-chip constants to be returned by a chip specific function.
Implement get_litter_value() for each chip.
Change-Id: I8bda9bf99b2cc6aba0fb88a69cc374e0a6abab6b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1121384
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Add regops whitelists for gp10b. The whitelist is generated, and is the
same for context switched and global registers.
Bug 1633363
Change-Id: I6d4d43d036d684c9f0d836a1a032f2c452604902
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/760935
gm20b clock registers do not exist in gp10b. Skip setting the clock
HAL to gm20b variants.
Change-Id: Ieaa9a04a8afbe772864d947d968e3e1c7f9968e9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/760854
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Fix sparse warnings of below type by making necessary
symbols static:
warning: symbol '<symbol>' was not declared. Should it be static?
Bug 200088648
Change-Id: Ic20ef3eb73dcbfe5f13506b5afa629c3e1db59d0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/728012
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
ce interrupts use different register mapping
and format from gk20a and gm20b.
Change-Id: Icfe33bad940b2b829b6f57d07a3300adaf53d43c
Signed-off-by: Sam Payne <spayne@nvidia.com>
Reviewed-on: http://git-master/r/681646
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
