Move ACR WPR init region cmd from ISR to LSFM as part of LSF bootstrap
request to execute the ACR commands sequentially as well as a blocking
call by polling is_wpr_init_done status till set to true. Needed to
add dealy after each ACR command for ga10b LSPMU due to nvriscv priv
lockdown for ACR commands asynchronously from the nvgpu as detailed
below,
LSPMU engages priv lockdown whenever ACR commands needs to be
processed, and nvgpu polls for interrupt status by polling
pwr_falcon_irqstat_r registers once command is sent to PMU to
process the ACK message from LSPMU if priv lockdown is not
engaged. During NVRISCV priv lockdown couple of register are
not accessible including irqstat register, priv lockdown is
done by LSPMU upon ACR command receive and its asynchronous
to nvgpu which cause nvgpu irqstat read data to be 0xbadf*
during polling at corner cases even though priv lockdown
check is present and interpreting wrongly the irq stat
register.
Add delay of 5ms after ACR command sent to LSPMU(LSPMU takes
~3.5msec to complete the command process) and before polling
the irqstat register in nvgpu to engage priv lockdown in LSPMU.
This additional delay will help to skip reading the irqstat at
corner case during the priv lockdown process.
Bug 3464141
Bug 3482947
Change-Id: I494493a92f6ede5dcb876aeb0d76d54969f0f59e
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2673246
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
* As of now, working on multiple chip bringup in nvgpu-next repo has
an issue because we end with losing control on source code (hard to
find which part of the code belongs to which chip) and it's valuable
history this affects chip migration on release.
* To support multiple chip bringup simultaneously, we need new
guidelines to avoid losing control on source code and make migration
easier. This change adds links to nvgpu-next repo.
* Updated return code to ENODEV for consistency
* Updated ACR unittest to work with ENODEV return code
NOTE:
These are the initial set of infrastructure changes, guidelines
will evolve, and source code will get updated accordingly.
Based on future chip features, Which part of the source code falls
under nvgpu-next repo is decided.
JIRA NVGPU-6574
Change-Id: I81827e35d189c55554df00e255b527a4473e0338
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2556793
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The CONFIG_NVGPU_NEXT config is no longer required now that ga10b and
ga100 sources have been collapsed. However, the ga100, ga10b sources
are not safety certified, so mark them as NON_FUSA by replacing
CONFIG_NVGPU_NEXT with CONFIG_NVGPU_NON_FUSA.
Move CONFIG_NVGPU_MIG to Makefile.linux.config and enable MIG support
by default on standard build.
Jira NVGPU-4771
Change-Id: Idc5861fe71d9d510766cf242c6858e2faf97d7d0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2547092
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lazy bootstrap is a secure iGPU feature where LS falcons(FECS and
GPCCS) are bootstrapped by LSPMU in both cold boot and recovery boot.
As there is no ACR running after boot, we need LSPMU to bootstrap LS
falcons to support recovery.
In absence of LSPMU, ACR will bootstrap LS falcons but recovery is
not supported.
This CL will enable Low secure falcon manager(lsfm) to support
Lazy bootstrap feature. This will allow nvgpu to send cmds
to lspmu to bootstrap LS falcons.
Bug 200709761
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I65d17cf5e07a45c040a9bb75f75cf18eb509cd4f
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2506162
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Current clk unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from pmuif which only
clk can access.
All public items are moved into include/clk.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4491
Change-Id: Iccb0571e05ecb3cb13363390bed8c7214409b543
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292318
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Since dGPU support is not required for initial safety release, compile
out dGPU sw and hal implementations except below files that are used
by gv11b currently: acr_sw_gv100.c, engine_status_gv100.c, gr_gv100.c
gr_config_gv100.c and hwpm_map_gv100.c.
JIRA NVGPU-3062
Change-Id: I8a6bc8b235e7e5eac5b0e76147b8bd12f9abbd2d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2119586
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Allocate space at runtime for PMU RTOS fw struct, this helps
to reduce the size of nvgpu_pmu struct when LS_PMU support
is not required.
Allocation happens at pmu early init stage & will deinit at
remove_support stage.
JIRA NVGPU-1972
Change-Id: I1452b085f8d3a76e12186f788c2d999a8b4b202d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2111072
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created PMU fw unit to hold PMU RTOS f/w specific ops, images,
flags & command arguments needed for PMU RTOS ucode support.
Moved PMU fw ops from gk20a.gpu_ops to pmu.fw.ops as these ops
are needed to support different version of PMU fw version for
different chips
JIRA NVGPU-1955
Change-Id: I51385d8c20524431f07cba3378676464663deb20
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090769
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
lsfm-LS falcon manager
Created lsfm unit under common/pmu/lsfm, moved functions &
variables related to lsfm functionality under lsfm unit,
within lsfm unit created separate files based on init which
does chip specific s/w init, separated private/public
functionality.
JIRA NVGPU-3021
Change-Id: Iad4a4e5533122fb2387a4980581a0d7bcdb37d67
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2080546
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
