The driver configures the sm hww global, warp ESR report masks during poweron
as part of gops_gr.gr_init_support. However, during golden context init, these
are overwritten with default entries from sw_ctx_load list; this leaves the
report masks in a state inconsistent with the driver expectation.
The driver should configure the sm hww warp, global ESR report masks during
golden context init and not before it; Hence, move set_hww_esr_report_mask from
power-on path to golden context init.
In addition, update set_hww_esr_report_mask to do RMW, so as to retain the
values loaded from sw_ctx_load list.
Update global ESR report mask to enable all exceptions.
Bug 3029888
Bug 2997718
Change-Id: Id7ad4cff5409982143f49695c95c5e1d1c9fdec9
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367466
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
While booting LS falcons, gr.falcon.bind_instblk gops is
used to bind WPR VA to gr falcon. Only FECS_METHOD must be
used to bind instblks. But at this point FECS falcon is not loaded
and running. Hence FECS_METHOD cannot be used to bind this instblk.
Besides that, this code is not required
for successful falcon boot and functioning of chips other
than gm20b.
JIRA NVGPU-5323
Change-Id: I148ccc77d65d5f01adbba6261369e7a292dccfc3
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369736
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently the vGPU engine management rewrites a lot of the common
device agnostic engine management code.
With the new top HAL parsing one device at a time, it is now more
easily possible to tie the vGPU into the new common device framework
by implementing the top HAL but with the vGPU engine list backend.
This lets the vGPU inherit all the common engine and device
management code. By doing so the vGPU HAL need only implement a
trivial and simple HAL.
This also gets us a step closer to merging all of the CE init
code: logically it just iterates through all CE engines whatever
they may be. The only reason this differs between chips is because
of the swap from CE0-2 to LCEs in the Pascal generation. This could
be abstracted by the unit code easily enough.
Also, the pbdma_id for each engine has to be added to the device
struct. Eventually this was going to happen anyway, since the
device struct will soon replace the nvgpu_engine_info struct.
It's a little bit of an abuse but might be worth it long term. If
not, it should not be difficult to replace uses of dev->pbdma_id
with a proper lookup of PBDMA ID based on the device info.
JIRA NVGPU-5421
Change-Id: Ie8dcd3b0150184d58ca0f78940c2e7ca72994e64
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2351877
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
On simulation platforms the netlist data is fetched from fmodel chiplib.
The chiplib has been updated to include certain pm, perf registers which
were already present in the netimage.
Update sim netlist parsing to fetch the following list of registers:
- LIST_pm_ctx_reg_PPC
- LIST_nv_perf_ctx_reg_SYS
- LIST_nv_perf_sysrouter_ctx_regs
- LIST_nv_perf_pma_ctx_regs
- LIST_nv_perf_fbp_ctx_regs
- LIST_nv_perf_fbprouter_ctx_regs
- LIST_nv_perf_ctx_reg_GPC
- LIST_nv_perf_gpcrouter_ctx_regs
- LIST_pm_ltc_ctx_regs
Bug 2916121
Change-Id: Ida8e02f97f9ae3fc3d89ee6c9e890fe5e441aaa0
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2369866
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Current PM resource reservation system is limited to HWPM resources
only. And reservation tracking is done using boolean variables.
New upcoming profiler support requires reservation for all the PM
resources like SMPC and PMA stream. Using boolean variables is
not scalable and confusing. Plus the variables have to be replicated
on gpu server in case of virtualization.
Remove flag tracking mechanism and use list based approach to track
all PM reservations. Also, current HALs are defined on debugger object.
Implement new HALs in new pm_reservation object since it is really an
independent functionality.
Add new source file common/profiler/pm_reservation.c which implements
functions to reserve/release resources and to check if any resource
is reserved or not.
Add common/vgpu/pm_reservation_vgpu.c for vGPU which simply forwards
the request to gpu server.
Define new HAL object gops.pm_reservation and assign above functions
to below respective HALs :
g->ops.pm_reservation.acquire()
g->ops.pm_reservation.release()
g->ops.pm_reservation.release_all_per_vmid()
Last HAL above is only used for gpu server cleanup of guest OS.
Add below new common profiler functions that act as APIs to reserve/
release resources for rest of the units in nvgpu.
nvgpu_profiler_pm_resource_reserve()
nvgpu_profiler_pm_resource_release()
Initialize the meta data required for reservtion system in
nvgpu_pm_reservation_init() and call it during nvgpu_finalize_poweron.
Clean up the meta data before releasing struct gk20a.
Delete below HALs :
g->ops.debugger.check_and_set_global_reservation()
g->ops.debugger.check_and_set_context_reservation()
g->ops.debugger.release_profiler_reservation()
Bug 2510974
Jira NVGPU-5360
Change-Id: I4d9f89c58c791b3b2e63099a8a603462e5319222
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2367224
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
1) In MIG mode, 2D, 3D, I2M and ZBC classes are not supported by
GR engine. NvGpu shall expose the HWCaps through
"struct nvgpu_gpu_characteristics".
2) NvGpu shall expose the following MIG related new caps through
"struct nvgpu_gpu_characteristics".
* mig_enabled - Flag to indicate whether MIG is enabled/disabled.
* gpu_instance_id - GPU instaces Id.
* gr_instance_id - graphics execution unit id.
* gr_sys_pipe_id - Sys pipe id of GR engine.
3) populate num_ppc_per_gpc - Pixel Processing cluster per GPC
4) populate max_veid_count_per_tsg - Maximum veid count per TSG
5) populate num_sub_partition_per_fbpa - Sub partition per FBPA.
JIRA NVGPU-5762
Change-Id: I06b5bcd3f568eb0b9c78c8fc6ce155b39aaeaba5
Signed-off-by: lm <lm@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2352100
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Unify the job metadata handling by deleting the parts that have handled
dynamically allocated job structs and fences. Now a channel can be in
one less mode than before which reduces branching in tricky places and
makes the submit/cleanup sequence easier to understand.
While preallocating all the resources upfront may increase average
memory consumption by some kilobytes, users of channels have to supply
the worst case numbers anyway and this preallocation has been already
done on deterministic channels.
Flip the channel_joblist_delete() call in nvgpu_channel_clean_up_jobs()
to be done after nvgpu_channel_free_job(). Deleting from the list (which
is a ringbuffer) makes it possible to reuse the job again, so the job
must be freed before that. The comment about using post_fence is no
longer valid; nvgpu_channel_abort() does not use fences.
This inverse order has not posed problems before because it's been buggy
only for deterministic channels, and such channels do not do the cleanup
asynchronously so no races are possible. With preallocated job list for
all channels, this would have become a problem.
Jira NVGPU-5492
Change-Id: I085066b0c9c2475e38be885a275d7be629725d64
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2346064
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below APIs to update hwpm/smpc ctxsw mode take a channel pointer as a
parameter. APIs then extract corresponding TSG from channel and perform
various operations on context stored in TSG.
g->ops.gr.update_smpc_ctxsw_mode()
g->ops.gr.update_hwpm_ctxsw_mode()
Update both above APIs to accept TSG pointer instead of a channel.
This is a refactor work to support new profiler design where a profiler
object is bound to TSG and keeps track of TSG only.
Bug 2510974
Jira NVGPU-5360
Change-Id: Ia4cefda503d8420f2bd32d07c57534924f0f557a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2366122
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move profiler object allocation/free APIs to separate profiler
specific file common/profiler.c.
Store struct gk20a pointer in struct dbg_profiler_object_data for
convenience of accessing global struct pointer.
Update profiler object to store TSG pointer instead of channel
pointer. Since expectations is to have one profiler object
per context/TSG.
nvgpu_profiler_reserve_acquire() has a case to check if resource
reservation is acquired by some other channel in TSG.
But now since we keep track of TSG itself, this case becomes
redundant and can be removed.
All the support is compiled out of safety build with compile
flag CONFIG_NVGPU_PROFILER.
Linux will always compile the support.
Bug 2510974
Change-Id: I197bbd67a9cdd1fbea42f1effd1b74b15a6068e5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2365674
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
quad type reg_ops were only needed on Kepler, and not for any other chip
beginning Maxweel.
HAL g->ops.gr.access_smpc_reg() was incorrectly set for Volta and Turing
whereas it was only applicable to Kepler. Delete it.
There is no register in the quad type whitelist since the type itself is
not supported anymore. Remove the empty whitelists for all chips and
also delete below HALs:
g->ops.regops.get_qctl_whitelist()
g->ops.regops.get_qctl_whitelist_count()
hal/regops/regops_gv100.* files are not used anymore. Delete the files
instead of just deleting quad HALs in these files.
Bug 200628391
Change-Id: I4dcc04bef5c24eb4d63d913f492a8c00543163a2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2366035
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add the following gr gops functions:
- enable_gpc_crop_hww
- enable_gpc_zrop_hww
- handle_gpc_crop_hww
- handle_gpc_zrop_hww
- handle_gpc_rrh_hww
These gr gops will be used in nvgpu-next.
Add function: nvgpu_gr_rop_offset to compute rop pri offsets.
Jira: NVGPU-5237
Change-Id: I9e2437c1d2893238b16ec7a134543e20c81b49f7
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2335687
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
The FIFO pbdma map is an array of bit maps that link PBDMAs to runlists.
This array allows other software to query what PBDMA(s) serves a given
runlist. The PBDMA map is read verbatim from an array of host registers.
These registers are stored in a kmalloc()'ed array.
This causes a problem for the device management code. The device
management initialization executes well before the rest of the FIFO
PBDMA initialization occurs. Thus, if the device management code
queries the PBDMA mapping for a given device/runlist, the mapping has
yet to be populated.
In the next patches in this series the engine management code is subsumed
into the device management code. In other words the device struct is
reused by the engine management and all host SW does is pull pointers to
the host managed devices from the device manager. This means that all
engine initialization that used to be done on top of the device
management needs to move to the device code.
So, long story short, the PBDMA map needs to be read from the registers
directly, instead of an array that gets allocated long after the device
code has run.
This patch removes the pbdma map array, deletes two HALs that managed
that, and instead provides a new HAL to query this map directly from
the registers so that the device code can use it.
JIRA NVGPU-5421
Change-Id: I5966d440903faee640e3b41494d2caf4cd177b6d
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2361134
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Adjust documentation and validity checks in the fence functions for
simplicity.
Now that the cde code is using user fences cleanly, the
do-nothing-on-null action can cause unintended behaviour in new code
using nvgpu_fence_get and nvgpu_fence_put. It does not make sense to
call these with a null fence, so delete the checks.
Extend the documentation in nvgpu_fence_extract_user() for the os fence
lifetime to give a reason for the dup call.
Make nvgpu_fence_from_semaphore() and nvgpu_fence_from_syncpt() return
void. These fill a previously allocated object; the only failure would
have been a null object, but that never happens and is not acceptable
behaviour for callers so delete these null checks and fix types.
Jira NVGPU-5248
Change-Id: I9f82365d50ab5600374c8f7dd513691eac14a2f1
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359624
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The stored fence in struct gk20a_buffer_state is a post fence of a
previous cde preparation job, if any. This stored fence is passed to
userspace via NVGPU_GPU_IOCTL_PREPARE_COMPRESSIBLE_READ in case a
preparation job was necessary to fulfill the request. As nothing else is
needed from the fence, make it just a struct nvgpu_user_fence.
Add nvgpu_user_fence_clone() for copying this user fence because it's
stored internally and returned to userspace. The refcounted os fence
needs special care. Now that the API is not so trivial anymore, add some
documentation.
Jira NVGPU-5248
Jira NVGPU-5493
Change-Id: I8bc4d52eaab7c7cbc5573b331e72e1d853f9f057
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359065
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Decouple the fence information needed for providing submit postfences to
userspace by adding a separate type for that and using it to pass fence
data to ioctls.
The data in struct nvgpu_fence_type is used in various places:
- job tracking needs to know when a post fence is expired
- job submitters within the driver (vidmem clears) need to be able to
wait for these fences
- userspace needs the fence as an id, value pair or as a file descriptor
created from an os fence
To keep object lifetimes strict, start decoupling the os fence data out
of struct nvgpu_fence_type: delete nvgpu_fence_install_fd() and add
nvgpu_fence_extract_user() to return a struct nvgpu_user_fence that
contains only the necessary information. Storing the os fence in job
tracking metadata is legacy code and not useful. Passing the os fence
from where it's created through the whole submit path inside this
combined fence type has been convenient, though.
The internally stored cde job fence in dmabuf compression metadata is
still nvgpu_fence_type to keep this patch simple.
Jira NVGPU-5248
Change-Id: I75b7da676fb6aa083828f888c55571bbf7645ef3
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2359064
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add a generic profiler based on the channel kickoff profiler. This
aims to provide a mechanism to allow engineers to (more) easily profile
arbitrary software paths within nvgpu.
Usage of this profiler is still primarily through debugfs. Next up is
a generic debugfs interface for this profiler in the Linux code.
The end goal for this is to profile the recovery code and generate
interesting statistics.
JIRA NVGPU-5606
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Change-Id: I99783ec7e5143855845bde4e98760ff43350456d
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2355319
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This adds a new device management unit in the common code responsible
for facilitating the parsing of the GPU top device list and providing
that info to other units in nvgpu.
The basic idea is to read this list once from HW and store it in a
set of lists corresponding to each device type (graphics, LCE, etc).
Many of the HALs in top can be deleted and instead implemented using
common code parsing the SW representation.
Every time the driver queries the device list it does so using a
device type and instance ID. This is common code. The HAL is responsible
for populating the device list in such a way that the driver can
query it in a chip agnostic manner.
Also delete some of the unit tests for functions that no longer
exist. This code will require new unit tests in time; those should be
quite simple to write once unit testing is needed.
JIRA NVGPU-5421
Change-Id: Ie41cd255404b90ae0376098a2d6e9f9abdd3f5ea
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2319649
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
In Bug 200588835, the spurious FBPA interrupts are seen on couple
of boards. These interrupts were found to be EDC (Error detection
and Correction) interrupts which are triggered due to ECC errors.
The EDC registers are not exposed to the driver, so the interrupt
status register cannot be cleared; resulting in interrupt storm.
Also, it was concluded that only bad HW can cause this failure
scenario. So, in the ISR for FBPA interrupts, get the GPU into
quiesce state as we don't expect the GPU to be in usable state post
such unrecoverable errors.
Adapt the quiesce code for Linux build too.
1. On Linux, we cannot exit the nvgpu process after quiesce like we
do on QNX. So, add nvgpu_disable_irqs() call to quiesce
implementation which is done as part of process exit handler on
QNX. Masking interrupts which is already done as part of quiesce
would be sufficient in most cases, but to be fail-safe
disable_irqs too.
3. Also, the IOCTL code looks at g->sw_ready, hence add
nvgpu_start_gpu_idle() to set g->sw_ready to false along with
setting NVGPU_DRIVER_IS_DYING = true.
We expect the nvgpu_sw_quiesce() call to finish before quiesce thread
wakes up from 50ms sleep. Hence, critical step like
nvgpu_start_gpu_idle() is added to nvgpu_sw_quiesce(), whereas the
somewhat redundant disable IRQs call is added to quiesce thread.
nvgpu_fifo_quiesce() was called twice by mistake; remove one of the
them.
Bug 2919899
Bug 200588835
Change-Id: I9beec688c2e1c0d8dfc1327ddf122684576f8684
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2354537
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The valid flag in struct nvgpu_fence_type is not very useful. It's set
when a fence is created on an allocated object and read in these three
scenarios:
- nvgpu_fence_install_fd() after a submit, if the submit was successful.
A successful submit implies that a post fence exists.
- nvgpu_fence_wait() for a copyengine job when synchronizing the ce
ringbuffer or when waiting for vidmem clears. In these cases the fence
is also clearly always valid.
- nvgpu_fence_is_expired() when testing whether a tracked job has
completed. Such jobs cannot exist without post fences that are
mandatory for tracking, so the fence must exist.
Remove the valid flag. Remove also the other init checks from the above
functions; they're equally unused and confusing implying that such calls
would be acceptable, causing sloppy code at best.
Jira NVGPU-5248
Jira NVGPU-5493
Change-Id: I52c5be1569b343024d2626bd9577f87b46064fba
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2357828
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement empty stubs of the channel watchdog functions for when
watchdog is disabled from build. Add some forward declarations that were
missing. Now most call sites don't need #idefs for the build flag.
Add error checks for the wdt alloc failure.
Jira NVGPU-5494
Jira NVGPU-5493
Change-Id: I2d42e8ab4c5e045cd280b2e1f254396127bd154b
Signed-off-by: Konsta Hölttä <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2352050
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, nvgpu_writel_loop() writes to a register and immediately
checks if register value is updated. It might take some time for
hardware registers to get updated with value written by software.
Modify nvgpu_writel_loop() to accept number of retries to check if
register value is updated and assert with nvgpu_assert().
Also, move nvgpu_writel_loop() to common code and use generic
nvgpu_readl() and nvgpu_writel() APIs.
JIRA NVGPU-5490
Change-Id: Iaaf24203a91eee3d05de7d0c7dea18113367de5f
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2348628
Reviewed-by: automaticguardword <automaticguardword@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
