Below listed HSI are handled with PMU ISR handler and
all these triggers interrupt from individual unit upon issue.
-Add ECC check for IMEM, DMEM, DCLS, REG, and MPU as per
HSI req
-Add MEMERR check for GPU_PMU_ACCESS_TIMEOUT_UNCORRECTED
PMU HSI id
-Add IOPMP check for GPU_PMU_ILLEGAL_ACCESS_UNCORRECTED
PMU HSI id
-Add WDT check for GPU_PMU_WDT_UNCORRECTED PMU HSI id
Bug 3491596
Bug 3366818
Change-Id: I751d653e447017ac62a2459da2c6bb9da506f438
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2686566
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following:
- Adds error IDs for GSP ACR and GSP SCHED.
- Updates error IDs for PMU.
- Removes reporting of DMEM ECC_CORRECTED since DMEM RAMs in PWR is
protected only with parity mechanism, (ref: T23x_UPROC_Safety_IAS)
- Removes reporting of IMEM ECC_CORRECTED since IMEM RAMs for PROC in
PWR is protected only with parity mechanism, (ref: T23x_UPROC_Safety_IAS)
JIRA NVGPU-8094
Change-Id: I127e78b1aa76b552758d1fff5bc7a01b5f8f3e54
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2677589
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following changes:
- Compiles-out unused error reporting APIs and the related
data structures from safety build. For this purpose, it
introduces the new flag: CONFIG_NVGPU_INTR_DEBUG
- Updates nvgpu_report_err_to_sdl() API with one more argument,
hw_unit_id. This aids in finding whether an error to be reported
is corrected or uncorrected from LUT.
- Triggers SW quiesce, if an uncorrected error is reported to
Safety_Services, in safety build.
- Renames files in cic folder by replacing gv11b with ga10b,
since error reporting for gv11b is not supported in dev-main.
JIRA NVGPU-8002
Change-Id: Ic01e73b0208252abba1f615a2c98d770cdf41ca4
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2668466
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
GVS: Gerrit_Virtual_Submit
In DRIVE 6.0, NvGPU is allowed to report only 32-bit metadata to
Safety_Services. So, there is no need to have distinct APIs for
reporting errors from units like GR, MM, FIFO to SDL unit. All
these error reporting APIs will be replaced with a single API. To
meet this objective, this patch does the following changes:
- Replaces nvgpu_report_*_err with nvgpu_report_err_to_sdl.
- Removes the reporting of error messages.
- Replaces nvgpu_log() with nvgpu_err(), for error reporting.
- Removes error reporting to Safety_Services from nvgpu_report_*_err.
However, nvgpu_report_*_err APIs and their related files are not
removed. During the creation of nvgpu-mon, they will be moved under
nvgpu-rm, in debug builds.
Note:
- There will be a follow-up patch to fix error IDs.
- As discussed in https://nvbugs/3491596 (comment #12), the high
level expectation is to report only errors.
JIRA NVGPU-7450
Change-Id: I428f2a9043086462754ac36a15edf6094985316f
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2662590
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Most of the Orin chip specific code is compiled out of safety build
with CONFIG_NVGPU_NON_FUSA and CONFIG_NVGPU_HAL_NON_FUSA. Remove the
config protection from Orin/GA10B specific code. Currently all code
is enabled. Code not required in safety will be compiled out later
in separate activity.
Other noteworthy changes in this patch related to safety build:
- In ga10b_ce_request_idle(), add a log print to dump num_pce so that
compiler does not complain about unused variable num_pce.
- In ga10b_fifo_ctxsw_timeout_isr(), protect variables active_eng_id and
recover under CONFIG_NVGPU_KERNEL_MODE_SUBMIT to fix compilation
errors of unused variables.
- Compile out HAL gops.pbdma.force_ce_split() from safety since this HAL
is GA100 specific and not required for GA10B.
- Compile out gr_ga100_process_context_buffer_priv_segment() with
CONFIG_NVGPU_DEBUGGER.
- Compile out VAB support with CONFIG_NVGPU_HAL_NON_FUSA.
- In ga10b_gr_intr_handle_sw_method(), protect left_shift_by_2 variable
with appropriate configs to fix unused variable compilation error.
- In ga10b_intr_isr_stall_host2soc_3(), compile ELPG function calls
with CONFIG_NVGPU_POWER_PG.
- In ga10b_pmu_handle_swgen1_irq(), move whole function body under
CONFIG_NVGPU_FALCON_DEBUG to fix unused variable compilation errors.
- Add below TU104 specific files in safety build since some of the code
in those files is required for GA10B. Unnecessary code will be
compiled out later on.
hal/gr/init/gr_init_tu104.c
hal/class/class_tu104.c
hal/mc/mc_tu104.c
hal/fifo/usermode_tu104.c
hal/gr/falcon/gr_falcon_tu104.c
- Compile out GA10B specific debugger/profiler related files from
safety build.
- Disable CONFIG_NVGPU_FALCON_DEBUG from safety debug build temporarily
to work around compilation errors seen with keeping this config
enabled. Config will be re-enabled in safety debug build later.
Jira NVGPU-7276
Change-Id: I35f2489830ac083d52504ca411c3f1d96e72fc48
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2627048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
common.cic unit is divided into common.cic.mon and common.cic.rm
based on rm and mon process split.
CIC-mon subunit includes the code which is utilized in critical
interrupt handling path like initialization, error detection and
error reporting path. CIC-rm subunit includes the code corresponding
to rest of interrupt handling(like collecting error debug data from
registers) and ISR status management (status of deferred interrupts).
Split the CIC APIs and data-members into above two subunits.
JIRA NVGPU-6899
Change-Id: I151b59105ff570607c4a62e974785e9c1323ef69
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2551897
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
CIC (Central Interrupt controller) will be responsible for the
interrupt handling. common.cic unit is the placeholder for all
interrupt related code. Move interrupt related defines and
Public APIs present in common.mc to common.cic.
Note: The common.mc interrupts related struct definitions are
not moved as part of this patch.
Adapt the code to use interrupt handling related defines and public
APIs migrated from common.mc to common.cic
JIRA NVGPU-6899
Change-Id: I747e2b556c0dd66d58d74ee5bb36768b9370d276
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2535618
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove current mc hals
- mc.reset()
- mc.enable()
- mc.disable()
- mc.reset_mask()
- mc.reset_engine()
- mc.reset_engine_enable()
Add new mc hals
- mc.enable_units(g, units, enable)
> enable/disable given unit(s)
- mc.enable_dev(g, dev, enable)
> enable/disable engine represented by given device pointer
- mc.enable_devtype(g, devtype)
> enable/disable all engines of given devtype
Move common mc intr functions to common/mc/mc_intr.c.
Add below common mc functions
- nvgpu_mc_reset_units(g, units)
> reset given logical OR of nvgpu unit bitmap
- nvgpu_mc_reset_dev(g, dev)
> reset given single engine via dev
> if engine is graphics, reset gpcs for nvgpu_next
- nvgpu_mc_reset_devtype(g, devtype)
> reset all engines of given devtype
> if devtype is graphics, reset gpcs for nvgpu_next
Bug 200648985
Bug 3109773
Change-Id: Idc67a14a0a7cde83de44fbfbec13007fead3ed5c
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2408523
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following changes are made in this patch.
1) Change unnamed structs within gpu_ops to named structs
with the prefix gops_*.
2) Each named struct gops_ are moved into a separate gops specific file
under include/nvgpu/gops/
3) struct gpu_ops is moved into a separate file include/nvgpu/gpu_ops.h
and all other dependent struct gops_* are included in this header.
4) Direct references to include/nvgpu/gops are removed from files as its enough
to include gk20a.h.
Change-Id: Ieb22cb853be567e3bef14f5f8a04674eebd902ea
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2398776
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
This patch removes the reporting of _ECC_CORRECTED errors which are
not applicable to GV11B. Specifically, this patch removes the code
related to the reporting of the following service IDs:
NVGUARD_SERVICE_IGPU_SM_SWERR_LRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_CBU_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_PMU_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GPCCS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_FECS_SWERR_FALCON_DMEM_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_GCC_SWERR_L15_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_FA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_MMU_SWERR_L1TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_L2TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_TLB_SA_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PTE_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_HUBMMU_SWERR_PDE0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L0_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_DATA_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_ICACHE_L1_PREDECODE_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_MISS_FIFO_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_SM_SWERR_L1_TAG_S2R_PIXPRF_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_TSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_RSTG_ECC_CORRECTED
NVGUARD_SERVICE_IGPU_LTC_SWERR_CACHE_DSTG_BE_ECC_CORRECTED
Bug 200616002
Change-Id: I199c396f9f6a6be007bd6d3c556199b5a73c3c91
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2349587
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU IRQs were not enabled assuming entire functionality for LS PMU.
Debugging early init issues of PMU falcon ECC errors triggered
during nvgpu power-on will be cumbersome if interrupts are not
enabled early. FMEA analysis of the nvgpu init path also
requires this interrupt be enabled earlier.
Hence, Enable the PMU ECC IRQ early during nvgpu_finalize_poweron.
pmu_enable_irq is updated to enable interrupts differently for
safety and non-safety. PMU interrupts disabling is moved out
of nvgpu_pmu_destroy to nvgpu_prepare_poweroff. Prepared new
wrapper API nvgpu_pmu_enable_irq.
PMU ECC init and isr mutex init is moved to the beginning of
nvgpu_pmu_early_init as for safety, ls pmu code path is
disabled. Fixed the pmu_early_init dependent and mc
interrupt related unit tests.
Update the doxygen for changed functions.
JIRA NVGPU-4439
Change-Id: I1a1e792d2ad2cc7a926c8c1456d4d0d6d1f14d1a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2251732
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu.common.unit was just an enum used for passing to nvgpu.common.mc
APIs. So, move the enum into mc.h, and replace the include of unit.h
with mc.h where appropriate. And update the yaml arch.
JIRA NVGPU-4144
Change-Id: I210ea4d3b49cd494e43add1b52f3fbcdb020a1e3
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2216106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Multiple non-safe functions under NVGPU_DEBUGGER, NVGPU_CILP and other
config flags were moved to fusa files. Although they are guarded by
the C flags, it makes sense to keep those functions in non-fusa
files. Make this change for all hals.
JIRA NVGPU-3853
Change-Id: I8151b55a60cb50c5058af48bab9e8068f929ac3b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch addresses misra violations due to SDL error reporting
callbacks. In particular, it addresses the following misra violation:
- misra_c_2012_directive_4_7_violation: Calling function
"nvgpu_report_*_err()" which returns error information without testing
the error information.
JIRA NVGPU-4025
Change-Id: Ia10b6b3fd9c127a8c5189c3b6ba316f243cedf04
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch moves all the safe static and non-static functions as well
as its dependencies such as static declared structs into files with
_fusa.c extension. If the original file is left with no functions
remaining then the file is deleted.
Added changes in Makefile, Makefile.sources, nvgpu-hal-new.yaml for
compilation.
Jira NVGPU-3690
Change-Id: I81af67c308705faf8a681df63a6778e7de2076cf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2146761
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Rule 17.7 states that the value returned by a
function having non-void return type shall be
used.
- Add NVGPU_FEATURE_LS_PMU to compile out headers
in pmu_gv11b.h to fix MISRA violation 8.6
JIRA NVGPU-3570
Change-Id: I6ab104aa72d8fd6419bd336c45e9055a40ba5a7e
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2131420
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-compile out nvgpu_pmu members which are not required for
safety buid & modified source as required to support same.
-compile out PMU headers include which are not required for
safety code
-Removed unnecessary PMU header includes from some files
JIRA NVGPU-3418
Change-Id: I5364b1b16c46637d229e82745dd2846cb6335a72
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2128228
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following:
(1) Removes the usage of hw headers in SDL unit. For this purpose, it moves
the initialization required for errors that can be injected using hw
support, error injection function. Further, it passes the required
information to SDL via hal layers.
(2) Renames (i) PWR as PMU, (ii) nvgpu_report_ecc_parity_err to
nvgpu_report_ecc_err.
Jira NVGPU-3235
Change-Id: I69290af78c09fbb5b792058e7bc6cc8b6ba340c9
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2112837
Reviewed-by: Raghuram Kothakota <rkothakota@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
