Created class unit under hal and moved all valid class check related
functionality to this unit. Moved all class defs from gr to a new header
include/nvgpu/class.h.
Moved following hals from gr to newly created class unit:
bool (*is_valid_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid)(u32 class_num);
bool (*is_valid_gfx_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_gfx)(u32 class_num);
bool (*is_valid_compute_class)(struct gk20a *g, u32 class_num); -->
bool (*is_valid_compute)(u32 class_num);
JIRA NVGPU-3109
Change-Id: I01123e9b984613d4bddb2d8cf23d63410e212408
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2095542
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With hw minimal headers, lot of unwanted hw registers are stripped.
SW needed few updates to use minimal headers:
1. Use stride value to get non zero instance offset:
gr_pri_gpc0_tpc1_tpccs_tpc_activity_0_r() =
gr_pri_gpc0_tpc0_tpccs_tpc_activity_0_r() +
nvgpu_get_litter_value(g, GPU_LIT_TPC_IN_GPC_STRIDE);
gr_pri_be1_becs_be_activity0_r() = gr_pri_be0_becs_be_activity0_r() +
nvgpu_get_litter_value(g, GPU_LIT_ROP_STRIDE);
2. Broadcast registers should not be used for reading status and
they should be used only for broadcast register writes. Removed
following register reads from gm20b register dump:
NV_PGRAPH_PRI_GPCS_TPC0_TPCCS_TPC_ACTIVITY0
NV_PGRAPH_PRI_GPCS_TPC1_TPCCS_TPC_ACTIVITY0
Above optimizations are done for gm20b, gp10b and gv11b.
JIRA NVGPU-2917
JIRA NVGPU-2918
JIRA NVGPU-2919
Change-Id: Ia8c736639f7cada0cf9f0d227dac372bdf09e55b
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088128
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
These HALs are used to initialize and set preeemption modes
g->ops.gr.init_ctxsw_preemption_mode()
g->ops.gr.set_ctxsw_preemption_mode()
g->ops.gr.update_ctxsw_preemption_mode()
They are all h/w independent except for the functional support for
GFXP/CILP preemption support which is only present on gp10b+ chips
Add a characteristics flag NVGPU_SUPPORT_PREEMPTION_GFXP for these
preemption modes and set this flag for gp10b+ chips
Use this flag and unify all above HALs into below common functions
nvgpu_gr_obj_ctx_init_ctxsw_preemption_mode()
nvgpu_gr_obj_ctx_set_ctxsw_preemption_mode()
nvgpu_gr_obj_ctx_update_ctxsw_preemption_mode()
vGPU specific code also directly calls below vGPU specific APIs
vgpu_gr_init_ctxsw_preemption_mode()
vgpu_gr_set_ctxsw_preemption_mode()
g->ops.gr.update_ctxsw_preemption_mode() is not needed for vGPU since
it is handled by vserver
Above g->ops.gr.*_ctxsw_preemption_mode() HALs are no more required
hence delete them
Jira NVGPU-1887
Change-Id: I9b3164bcf01e5e3c27e52369c9364e0ee23a9662
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088507
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added following new hals in gr falcon:
u32 (*get_current_ctx)(struct gk20a *g);
-> to get current context in execution.
u32 (*get_ctx_ptr)(u32 ctx);
-> related ctx_ptr for the context
Updated gr_gk20a.c, gr_gm20b.c, gr_gp10b.c and gr_gv11b.c
to use these new hals.
JIRA NVGPU-1881
Change-Id: I1c1cef8e4b0ca04e3e3218d552b6e8e08fcfa7d0
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087039
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following functions are moved from gr_gk20a.c to common gr_falcon.c
gr_gk20a_disable_ctxsw -> nvgpu_gr_falcon_disable_ctxsw
gr_gk20a_enable_ctxsw -> nvgpu_gr_falcon_enable_ctxsw
gr_gk20a_halt_pipe -> nvgpu_gr_falcon_halt_pipe
Added new gr falcon hal to control ctxsw:
int gm20b_gr_falcon_ctrl_ctxsw(struct gk20a *g, u32 fecs_method,
u32 data, u32 *ret_val)
Parameters:
fecs_method: will be specified by a generic define provided in gr_falcon.h
header.
data: input data parameter (if any), set it to zero, if method did not
require any data input.
ret_val: pointer to expected output.
Added following ops for gr falcon:
int (*halt_pipe)(struct gk20a *g); -> this is moved from gr
int (*disable_ctxsw)(struct gk20a *g);
int (*enable_ctxsw)(struct gk20a *g);
JIRA NVGPU-1881
Change-Id: Idb3b7355b5a0bd3b9bb01f9f424c5d607616f540
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081308
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With hw minimal headers, lot of unwanted hw registers are stripped.
SW needed few updates to use minimal headers:
1. Use stride value to get non zero instance offset:
gr_pri_gpc0_tpc1_tpccs_tpc_activity_0_r() =
gr_pri_gpc0_tpc0_tpccs_tpc_activity_0_r() +
nvgpu_get_litter_value(g, GPU_LIT_TPC_IN_GPC_STRIDE);
gr_pri_be1_becs_be_activity0_r() = gr_pri_be0_becs_be_activity0_r() +
nvgpu_get_litter_value(g, GPU_LIT_ROP_STRIDE);
2. Broadcast registers should not be used for reading status and they should be
used only for broadcast register writes. Removed following register reads
from gm20b register dump:
NV_PGRAPH_PRI_GPCS_TPC0_TPCCS_TPC_ACTIVITY0
NV_PGRAPH_PRI_GPCS_TPC1_TPCCS_TPC_ACTIVITY0
JIRA NVGPU-2917
Change-Id: Ie1359699136c16b67121038024c2318ddd06190c
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087231
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code for secure/non-secure ctxsw booting spread across gr_gk20a.c
and gr_gm20b.c. With this change this code is move to gr falcon unit.
Ctxsw loading is now supported with 2 supported common functions:
1.Non secure boot:
int nvgpu_gr_falcon_load_ctxsw_ucode(struct gk20a *g);
2.Secure boot:
int nvgpu_gr_falcon_load_secure_ctxsw_ucode(struct gk20a *g);
Now gr ops function "int (*load_ctxsw_ucode)(struct gk20a *g);" is moved to
gr falcon ops and in chip hals it is set with secure/non-secure booting.
Non-secure booting: nvgpu_gr_falcon_load_ctxsw_ucode support ctxsw loading
in 2 methods: bit-banging uode or booting with bootloader
A. Common and hal functions for non-secure bit-banging ctxsw loading:
Common: static void nvgpu_gr_falcon_load_dmem(struct gk20a *g) ->
Hals: void (*load_gpccs_dmem)(struct gk20a *g,i
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_dmem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Common: static void nvgpu_gr_falcon_load_imem(struct gk20a *g) ->
Hals: void (*load_gpccs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Other basic HALs:
void (*configure_fmodel)(struct gk20a *g); -> configure fmodel for ctxsw loading
void (*start_ucode)(struct gk20a *g); -> start running ctxcw ucode
B.Common and hal functions for non-secure ctxsw loading with bootloader
First get the ctxsw ucode using: nvgpu_gr_falcon_init_ctxsw_ucode, then
Common: static void nvgpu_gr_falcon_load_with_bootloader(struct gk20a *g)
void nvgpu_gr_falcon_bind_instblk((struct gk20a *g) ->
Hal: void (*bind_instblk)(struct gk20a *g, struct nvgpu_mem *mem, u64 inst_ptr);
Common: nvgpu_gr_falcon_load_ctxsw_ucode_segments ->
nvgpu_gr_falcon_load_ctxsw_ucode_header ->
nvgpu_gr_falcon_load_ctxsw_ucode_boot for both fecs and gpccs ->
Hals: void (*load_ctxsw_ucode_header)(struct gk20a *g, u32 reg_offset,
u32 boot_signature, u32 addr_code32, u32 addr_data32,
u32 code_size, u32 data_size);
void (*load_ctxsw_ucode_boot)(struct gk20a *g, u64 reg_offset, u32 boot_entry,
u32 addr_load32, u32 blocks, u32 dst);
Other basic HAL to get gpccs start offset:
u32 (*get_gpccs_start_reg_offset)(void);
C.Secure booting is support with gpmu and acr and with following additional
common function in gr falcon.
static void nvgpu_gr_falcon_load_gpccs_with_bootloader(struct gk20a *g) ->
nvgpu_gr_falcon_bind_instblk and nvgpu_gr_falcon_load_ctxsw_ucode_segments
Additional basic hals:
void (*start_gpccs)(struct gk20a *g);
void (*start_fecs)(struct gk20a *g);
Following ops from gr is removed, since it is not required to set by chip hals:
void (*falcon_load_ucode)(struct gk20a *g, u64 addr_base,
struct gk20a_ctxsw_ucode_segments *segments, u32 reg_offset);
Now this is handled by static common function:
static int nvgpu_gr_falcon_copy_ctxsw_ucode_segments( struct gk20a *g,
struct nvgpu_mem *dst, struct gk20a_ctxsw_ucode_segments *segments,
u32 *bootimage, u32 *code, u32 *data)
JIRA NVGPU-1881
Change-Id: I895a03faaf1a21286316befde24765c8b55075cf
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083388
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_cb_manager() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_cb_manager()
Move hal definitions to gm20b/gp10b hal files appropriately
Add nvgpu_gr_config pointer to the parameter list of this hal so that
it does not have to dereference struct gr_gk20a in hal.gr.init unit
Jira NVGPU-2961
Change-Id: Iaff476648fa6abdf5a79be500f65a40eb90c0b08
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_attrib_cb() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_attrib_cb()
Remove register header accessor from gr_gk20a_commit_global_ctx_buffers()
and move it to hal functions
Move hal definitions to gm20b/gp10b/gv11b hal files appropriately
Jira NVGPU-2961
Change-Id: I5437a190a9e027997f63ef0e741d99e6bbebab3f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077218
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_pagepool() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_pagepool()
Also move g->ops.gr.pagepool_default_size() hal to
g->ops.gr.init.pagepool_default_size()
Add global_ctx boolean flag as parameer to
g->ops.gr.init.commit_global_pagepool() to distinguish between
committing global pagepool v/s ctxsw pagepool buffers
Remove register header accessors from gr_gk20a_commit_global_ctx_buffers()
and move them to hal functions
Move hal definitions to gm20b/gp10b hal files appropriately
Remove g->ops.gr.pagepool_default_size() hal for gv11b since gv11b can
re-use gp10b hal
Jira NVGPU-2961
Change-Id: Id532defe05edf2e5d291fec9ec1aeb5b8e33c544
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077217
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move init_gpc_mmu hal to hal.gr.init and update the
g->ops.gr.init_gpc_mmu call as g->ops.gr.init.gpc_mmu
Add new hal, pes_vsc_stream which will enable the master bit to
take floorsweep into consideration.
Modify the disable_rd_coalesce hal as su_coalesce hal and
set_rd_coalesce call as lg_coalesce hal and move to hal.gr.init
su_coalesce hal function touches only the surface read coalesce bit.
lg_coalesce hal function touches only the lg read coalesce bit.
JIRA NVGPU-2951
Change-Id: Ifc5e36f7e75d3b74142a83a3c78a9cb2b81752eb
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2079532
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_bundle_cb() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_bundle_cb()
Remove register header accessor from gr_gk20a_commit_global_ctx_buffers()
and move it to hal functions
Move hal definitions to gm20b/gp10b hal files appropriately
Jira NVGPU-2961
Change-Id: I6358dce963857402aa1d4d5606bf75398b9be83d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077216
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following ltc related data to struct nvgpu_ltc
and has a reference to it from struct gk20a:
struct nvgpu_spinlock ltc_enabled_lock;
u32 max_ltc_count;
u32 ltc_count;
u32 slices_per_ltc;
u32 cacheline_size;
Added function remove_support for ltc and it is called
during nvgpu remove sequence.
Added following helper functions in ltc.h:
u32 nvgpu_ltc_get_ltc_count(struct gk20a *g);
u32 nvgpu_ltc_get_slices_per_ltc(struct gk20a *g);
u32 nvgpu_ltc_get_cacheline_size(struct gk20a *g);
Removed redudnant ltc.init_fs_state call from vgpu init
sequence since it is getting called from nvgpu_init_ltc_support.
NVGPU-2044
Change-Id: I3c256dc3866f894c38715aa2609e85bd2e5cfe5a
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2073417
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below variables from struct gr_gk20a
u32 bundle_cb_default_size;
u32 min_gpm_fifo_depth;
u32 bundle_cb_token_limit;
u32 attrib_cb_default_size;
u32 alpha_cb_default_size;
u32 attrib_cb_gfxp_default_size;
u32 attrib_cb_gfxp_size;
u32 attrib_cb_size;
u32 alpha_cb_size;
Instead add below hals in hal.gr.init unit to get all of above sizes
u32 (*get_bundle_cb_default_size)(struct gk20a *g);
u32 (*get_min_gpm_fifo_depth)(struct gk20a *g);
u32 (*get_bundle_cb_token_limit)(struct gk20a *g);
u32 (*get_attrib_cb_default_size)(struct gk20a *g);
u32 (*get_alpha_cb_default_size)(struct gk20a *g);
u32 (*get_attrib_cb_gfxp_default_size)(struct gk20a *g);
u32 (*get_attrib_cb_gfxp_size)(struct gk20a *g);
u32 (*get_attrib_cb_size)(struct gk20a *g, u32 tpc_count);
u32 (*get_alpha_cb_size)(struct gk20a *g, u32 tpc_count);
u32 (*get_global_attr_cb_size)(struct gk20a *g, u32 max_tpc);
Define these hals for all gm20b/gp10b/gv11b/gv100/tu104 chips
Also add hal.gr.init support for gv100 chip
Remove all accesses to variables from struct gr_gk20a and start using
newly defined hals
Remove below hals to initialize sizes since they are no more required
g->ops.gr.bundle_cb_defaults(g);
g->ops.gr.cb_size_default(g);
g->ops.gr.calc_global_ctx_buffer_size(g);
Also remove definitions of above hals from all the chip files
Jira NVGPU-2961
Change-Id: I130b578ababf22328d68fe19df581e46aebeccc9
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077214
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move load_smid_config and program_sm_id_numbering hal functions to
corresponding hal files in hal.gr.init.
Add new hal for get_sm_id_size and new static function in common.gr
init code for gr_load_sm_id_config.
JIRA NVGPU-2951
Change-Id: I27755306d278db9fcd5ab60169a64057b2989ea8
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075875
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move load_tpc_mask and setup_rop_mapping hal functions to hal.gr.init.
Existing load_tpc_mask hal code is split to two parts, one as a common
code in gr_load_tpc_mask and register write to init.tpc_mask hal
functions.
Modify pd_tpc_per_gpc and pd_skip_table_gpc hals in the
hal.gr.init to pass struct nvgpu_gr_config as a parameter.
JIRA NVGPU-2951
Change-Id: I52e26d0f023afa511a8cf8c3e4c54f45350be4ae
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2074892
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently ACR header files are part of "include/nvgpu/acr/" folder &
ACR interfaces are not used by any other UNIT which allows headers to
keep restricted to ACR unit, as ACR can be divided into two stage
process like blob preparation & bootstrap, so moved header files from
of "include/nvgpu/acr/" to "nvgpu/common/acr/" to respective blob/
bootstrap/acr header files along with its dependent interfaces, this
allows interfaces restricted to header file based on operation it does.
With this any access to ACR must go through provided public functions,
this header move change caused large code modification & required to
make it with big single CL to avoid build break.
JIRA NVGPU-2907
Change-Id: Idb24b17a35f7c7a85efe923c4e26edfd42b028e3
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071393
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To avoid the other hal calls from gr_gv11b_init_fs_state
and gr_gm20b_init_fs_state hal, move the load_tpc_mask and
load_smid_config hal to nvgpu_gr_init_fs_state common gr function.
bes_zrop_setting and bes_crop_setting for active_ltcs is moved before
the nvgpu_gr_init_fs_state call from those hals.
replace gk20a_writel and gk20a_readl in modified hal function with
nvgpu_writel and nvgpu_readl.
JIRA NVGPU-1885
Change-Id: Ic0bf4a4bfa4da032f33bbe4af89031bbbdd9cd94
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072414
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are made in this patch.
1) nvgpu driver is incorrectly using u32 to store enum values in some
functions. Replaced them with correct type enum nvgpu_fifo_engine
2) change parameter type in nvgpu_engine_get_ids from engine_id[]
to *engine_ids
3) rename some function names to remove redundant characters to make
the name shorter.
4) Removed the initialization of enum nvgpu_fifo_engine in functions
where we assign a value before direct access.
Jira NVGPU-1315
Change-Id: Ic65b40c9cb1e90ad278cb36a00e1c9de51724f27
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2020230
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added support to disable/skip to load LS PMU based on PMU support flag,
when LS PMU skipped only basic PMU engine ops are needed for HS ACR
to load & execute on PMU engine falcon,
GR LS falcons cold/recovery bootstrap will be taken care by ACR as HS
ACR will be loaded for both case & exits by halting in non-secure mode.
JIRA NVGPU-173
Change-Id: I7288c185a9ca2e18b2689aa8a7e0c27a61dd12f5
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2019927
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below HALs to get max FBPs, max LTC per FBP, max LTS pet LTC values are
right now defined by GR unit.
g->ops.gr.get_max_fbps_count()
g->ops.gr.get_max_ltc_per_fbp()
g->ops.gr.get_max_lts_per_ltc()
These HALs only read registers from hw_top_*.h h/w unit, and as such
belong to TOP unit. Move them appropriately as below
g->ops.top.get_max_fbps_count()
g->ops.top.get_max_ltc_per_fbp()
g->ops.top.get_max_lts_per_ltc()
Remove hw_top_*.h h/w header include from gr_gk20a.c and gr_gm20b.c
Jira NVGPU-2894
Change-Id: I995d9f56edb65c9de98d2d15d34ecb72920a65c6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030672
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following changes are done in this patch.
1) gk20a_fifo_get_engine_info() is moved to common/fifo/engine.c
and is renamed to gk20a_fifo_get_active_engine_info() to reflect
accurately the purpose of the function.
2) move the definition of enum fifo_engine to <nvgpu/engines.h> and
add the prefix NVGPU_
3) move the following functions related to engines in fifo_gk20a.c to
common/fifo/engines.c and replace their signature by adding the prefix
nvgpu_engine and removing gk20a_fifo.
gk20a_fifo_get_active_engine_info
gk20a_fifo_engine_enum_from_type
gk20a_fifo_get_engine_ids
gk20a_fifo_is_valid_engine_id
gk20a_fifo_get_gr_engine_id
gk20a_fifo_act_eng_interrupt_mask
gk20a_fifo_engine_interrupt_mask
gk20a_fifo_get_all_ce_engine_reset_mask
Jira NVGPU-1315
Change-Id: I63d9dcd905a0bebcc9a4c65776cf6ec7a0837acf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2011298
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We get gpc_mask by calling GR HAL g->ops.gr.get_gpc_mask()
But gpc_mask should be logically owned by gr/config unit
Hence add new gpc_mask field to nvgpu_gr_config
Initialize it in nvgpu_gr_config_init() by calling a new HAL
g->ops.gr.config.get_gpc_mask() if available
If HAL is not defined we just initialize it based on gpc_count
Expose new API nvgpu_gr_config_get_gpc_mask() to get gpc_mask
and use this API now
Remove gr_gm20b_get_gpc_mask() and HAL g->ops.gr.get_gpc_mask()
Update GV100 and TU104 chip HALs to remove old and add new HAL
Add gpc_mask to struct tegra_vgpu_constants_params to support this
on vGPU. Also get gpc_mask from vGPU private data in
vgpu_gr_init_gr_config()
Jira NVGPU-1879
Change-Id: Ibdc89ea51df944dc7085920509e3536a5721efc0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2016084
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added data struct under ACR struct to manage LS falcons ucode
as LS falcon ucode holds multiple properties & can be set at acr
init stage to bootstrap LS falcons as required, at present LS falcons
code is part ACR & partially part of PMU code to setup LSF bootstrap,
so, needed to clean up the dependency.
JIRA NVGPU-1148
Change-Id: Ie206e129e3db838041db44d5227ab76a1de991c8
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012763
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit gr/config to initialize GR configuration like GPC/TPC
count, MAX count and mask
Create new structure nvgpu_gr_config that stores all the configuration
and that is owned by the new unit
Move below fields from struct gr_gk20a to nvgpu_gr_config in gr/config.h
Struct gr_gk20a now only holds the pointer to struct nvgpu_gr_config
u32 max_gpc_count;
u32 max_tpc_per_gpc_count;
u32 max_zcull_per_gpc_count;
u32 max_tpc_count;
u32 gpc_count;
u32 tpc_count;
u32 ppc_count;
u32 zcb_count;
u32 pe_count_per_gpc;
u32 *gpc_tpc_count;
u32 *gpc_ppc_count;
u32 *gpc_zcb_count;
u32 *pes_tpc_count[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_tpc_mask;
u32 *pes_tpc_mask[GK20A_GR_MAX_PES_PER_GPC];
u32 *gpc_skip_mask;
u8 *map_tiles;
u32 map_tile_count;
u32 map_row_offset;
Remove gr->sys_count since it was already no longer used
common/gr/config/gr_config.c unit now exposes the APIs to initialize
the configuration and also to query the configuration values
nvgpu_gr_config_init() is called to initialize GR configuration from
gr_gk20a_init_gr_config() and gr_gk20a_init_map_tiles() is simply
renamed as nvgpu_gr_config_init_map_tiles()
Expose new API nvgpu_gr_config_deinit() to deinit the configuration
Expose nvgpu_gr_config_get_*() APIs to query above configuration
fields stored in nvgpu_gr_config structure
Update vgpu_gr_init_gr_config() to initialize the configuration
from gr->config structure
Chip specific HALs that access GR register for initialization
are implemented in common/gr/config/gr_config_gm20b.c
Set these HALs for all GPUs
Jira NVGPU-1879
Change-Id: Ided658b43124ea61b9f273b82b73fdde4ed3c8f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2012167
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/subctx.c to manage GR subcontext
This unit provides interfaces to allocate/free/load GR subcontext
Add new header file include/nvgpu/gr/subctx.h to declare all the
interfaces.
Right now channel_gk20a structure directly includes a nvgpu_mem
for context header.
Declare a new structure nvgpu_gr_subctx for subcontext and include
this from channel_gk20a
Make all necessary changes to refer ctx_header from subctx instead
of directly referencing it from channel
Jira NVGPU-1613
Change-Id: I9eb1ee8f26fa88d2881f9b294935b65e9cbcc9b4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1990129
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. This patch contains fix for all 17.7 violations in gm20b files.
JIRA NVGPU-677
Change-Id: I63182d52213494f871c187b5efc1637bc36bdf3d
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2003230
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We use below APIs to update patch context
gr_gk20a_ctx_patch_write_begin()
gr_gk20a_ctx_patch_write_end()
gr_gk20a_ctx_patch_write()
Since patch context is owned by gr/ctx unit, move these APIs
to this unit and rename them to
nvgpu_gr_ctx_patch_write_begin()
nvgpu_gr_ctx_patch_write_end()
nvgpu_gr_ctx_patch_write()
Jira NVGPU-1527
Change-Id: Iee19c7a71d074763d3dcb9b1997cb2a3159d5299
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989214
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename __nvgpu_set_enabled() to nvgpu_set_enabled(). The original
double underscore was present to indicate that this function is a
function with potentially unintended side effects (enabling a feature
has wide ranging impact).
To not lose this documentation a comment was added to convey that this
function must be used with care.
JIRA NVGPU-1029
Change-Id: I8bfc6fa4c17743f9f8056cb6a7a0f66229ca2583
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989434
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/ctx.c to manage GR context
This unit provides interfaces to allocate/free/map/unmap GR context,
patch context, pm context, ctxsw {preempt/spill/betacb/pagepool/rtvcb}
buffers.
It also provides APIs to set size of above buffers
Add new header file include/nvgpu/gr/ctx.h to declare all the interfaces.
Move nvgpu_gr_ctx, patch_desc, pm_ctx_desc, zcull_ctx_desc structures
to this unit
Add new structure nvgpu_gr_ctx_desc to hold context description
parameters. For now we add sizes of all the buffers here.
Add this structure to gr_gk20a for global reference
Remove gr_gp10b_alloc_buffer() since it is no longer used
Rename g->ops.gr.alloc_gfxp_rtv_cb() to g->ops.gr.init_gfxp_rtv_cb()
since this HAL now only sets the size of rtvcb ctxsw buffer
Remove gr->ctx_vars.buffer_size and gr->ctx_vars.buffer_total_size
since they were redundant. We already have gr->ctx_vars.golden_image_size
to denote golden image size
Jira NVGPU-1527
Change-Id: I8847b347f80235209dd5e28d979e79984ab85408
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1987702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 10.1 mandates that the correct data types are used as
operands of operators. For example, only unsigned integers can be used
as operands of bitwise operators.
This patch fixes rule 10.1 vioaltions for gm20b.
JIRA NVGPU-777
JIRA NVGPU-1006
Change-Id: I0c8b3f04c943a1cea23ce3f678ebb915e8a5a5da
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1971166
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.alloc_gr_ctx HAL right now allocates graphics context and
also initializes preemption mode for various platforms
Separate out a new HAL g->ops.gr.init_ctxsw_preemption_mode that
initializes preemption mode and call it from gk20a_alloc_obj_ctx()
after context is created
g->ops.gr.alloc_gr_ctx now only allocates the context as the name
suggests
Jira NVGPU-1527
Change-Id: I8a44672d5ab2ebfe315e6334115265e4ee4f24f0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972254
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.enable_cde_in_fecs and g->ops.gr.update_boosted_ctx
are no longer required since we can directly call
g->ops.gr.ctxsw_prog.set_cde_enabled and
g->ops.gr.ctxsw_prog.set_pmu_options_boost_clock_frequencies
respectively
remove those functions and the ops
Jira NVGPU-1526
Change-Id: Idb0ad5f634e78aac44ec325ba2b7f59c612b29e8
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972184
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add separate new unit gr/ctxsw_prog that provides interface to access
h/w header files hw_ctxsw_prog_*.h
Add below chip specific files that access above h/w unit and provide
interface through g->ops.gr.ctxsw_prog.*() HAL for rest of the units
common/gr/ctxsw_prog/ctxsw_prog_gm20b.c
common/gr/ctxsw_prog/ctxsw_prog_gp10b.c
common/gr/ctxsw_prog/ctxsw_prog_gv11b.c
Remove all the h/w header includes from rest of the units and code.
Remove direct calls to h/w headers ctxsw_prog_*() and use HALs
g->ops.gr.ctxsw_prog.*() instead
In gr_gk20a_find_priv_offset_in_ext_buffer(), h/w header
ctxsw_prog_extended_num_smpc_quadrants_v() is only defined on gk20a
And since we don't support gk20a remove corresponding code
Add missing h/w header ctxsw_prog_main_image_pm_mode_ctxsw_f() for
some chips
Add new h/w header ctxsw_prog_gpccs_header_stride_v()
Jira NVGPU-1526
Change-Id: I170f5c0da26ada833f94f5479ff299c0db56a732
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1966111
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The return type of the function pointer *calc_global_ctx_buffer_size()
is changed from int to u32 and all its implementations.
The arg type of size in *set_big_page_size() is changed from int to
u32 and all it implementations. These changes are necessary because
size should be an unsigned value.
JIRA NVGPU-992
Change-Id: I3e4cd1d83749777aa8588a44a48772e26f190c4d
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1950503
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
